Vulnerabilities exploitable today
406,578in current view
Single score combining CVSS, KEV membership and EPSS. Every CVE with its own record — timeline from publication to active exploitation.
In KEV catalog1,766
New KEV · 24H0
Exploit Today ≥ 701,698
Distribution · last window
- Critical5,578
- High21,619
- Medium20,219
- Low2,099
Filters
Window
Severity
Flags
CVECVSSEPSSKEVRExploitTitleMod.
CVE-2026-992187.0 HIG—
———In the Linux kernel, the following vulnerability has been resolved:
coredump: hold RCU while releasing parked threads
coredump_finish() releases the parked threads by clearing ->task in
their core_thread entry and calling wake_up_process() on each of them.
It does that without holding a reference on the task and without being
inside rcu.
But calling wake_up_process(task) without rcu here isn't safe. A parked
thread doesn't need that wakeup to leave. A spurious wakeup or a
preemption after the store is enough for the task to go away.
So if the coredump client is preempted between the store and
wake_up_process() the thread can exit and be freed in the meantime and
try_to_wake_up() takes pi_lock in freed memory.
Hold rcu across the loop.4hCVE-2026-115653——
———In Eclipse ThreadX versions 6.0.1 through 6.5.2.202603, the PendSV handler of the Cortex-M module ports saves a preempted user-mode module thread's registers in privileged mode at addresses taken from the thread's stack pointer, without checking that pointer against the thread's stack. A user-mode, memory-protected module can thereby write up to nine words, eight of its choosing, or 25 with floating-point state, into memory immediately below any region it may write, and read back what is stored there.3hCVE-2026-115654——
———In Eclipse ThreadX versions 6.0.1 through 6.5.2.202603, the Module Manager's thread-control services do not check that a thread passed by a user-mode, memory-protected module belongs to that module. Any loaded module can suspend, resume, terminate, reset or re-prioritise application threads and other modules' threads and abort their waits, denying service or changing how the system schedules them.3hCVE-2026-99219——
———In the Linux kernel, the following vulnerability has been resolved:
ftrace: Initialize modname and offset in print_rec()
print_rec() leaves 'modname' and 'offset' uninitialized and
kallsyms_lookup() only sets them on success. When the lookup fails like
when a module is being loaded or unloaded, 'modname' holds a garbage
value, passes the 'if (modname)' check, and is dereferenced by
seq_printf().
Oops: general protection fault
RIP: 0010:string+0x48/0xe0
Call Trace:
vsnprintf+0x1f5/0x650
seq_printf+0x8e/0xb0
print_rec+0x6c/0xc0
t_show+0x4c/0x440
seq_read_iter+0x119/0x480
This can be triggered by reading available_filter_functions while a
module is being loaded or unloaded.
Initialize both variables so a failed lookup skips the module name.4hCVE-2026-99241——
———In the Linux kernel, the following vulnerability has been resolved:
ntfs: take invalidate_lock in ntfs_filemap_page_mkwrite()
ntfs_filemap_page_mkwrite() calls iomap_page_mkwrite() without holding
mapping->invalidate_lock, so a concurrent truncate or fallocate can be
in the middle of invalidating pagecache and rewriting the runlist while
the write fault maps blocks and dirties the folio. This races with
ntfs_attr_fallocate(), which merges clusters into the in-memory
runlist, drops the runlist lock, and only afterwards zeroes the newly
allocated clusters on disk; and with the punch-hole/insert/collapse
paths that free clusters after truncating the cache.
Per Documentation/filesystems/locking.rst, ->page_mkwrite() must ensure
there are no truncate/invalidate races, "usually mapping->invalidate_lock
is suitable for proper serialization". xfs takes its mmaplock (= the
invalidate_lock rwsem) shared in exactly this path.
Take invalidate_lock shared around iomap_page_mkwrite(). The read-only
fault path is already covered because filemap_fault() itself grabs
invalidate_lock shared on instantiation/read paths; only page_mkwrite
was bypassing it in this driver.4hCVE-2026-1205006.1 MED—
———An Otter Wiki before 2.26.2 contains a stored cross-site scripting vulnerability in OtterwikiMdRenderer.block_code that allows attackers who can edit pages, including anonymous users under the default configuration, to inject arbitrary script. Attackers can place HTML inside a math fenced code block, which is rendered unescaped and executes for every viewer of the page.4hCVE-2026-99220——
———In the Linux kernel, the following vulnerability has been resolved:
asymmetric_keys: reject trust keys without IDs
The PKCS#8 parser deliberately leaves the asym_key_ids payload slot
empty. key_or_keyring_common() unconditionally dereferences that slot
when a PKCS#8 key is supplied to a key_or_keyring restriction. Both the
plain and :chain forms reach this branch, allowing an unprivileged caller
to trigger a NULL pointer dereference through KEYCTL_RESTRICT_KEYRING
followed by add_key().
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:key_or_keyring_common (crypto/asymmetric_keys/restrict.c:205 crypto/asymmetric_keys/restrict.c:279)
Call Trace:
<TASK>
__key_create_or_update (security/keys/key.c:884)
key_create_or_update (security/keys/key.c:1021)
__do_sys_add_key (security/keys/keyctl.c:134)
do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
Kernel panic - not syncing: Fatal exception
Reject an asymmetric restriction key without key IDs. A PKCS#8 private
key cannot identify the signer of a candidate certificate and is not a
valid trust anchor.4hCVE-2026-99221——
———In the Linux kernel, the following vulnerability has been resolved:
keys/trusted_keys: return immediately after TPM unseal failure
trusted_tpm_unseal() proceeds to pcrlock() when the TPM unseal operation
fails. If pcrlock() succeeds, its return value overwrites the unseal error,
causing key instantiation to succeed.
Return immediately when unseal fails to preserve the original error.4hCVE-2026-1205015.3 MED—
———An Otter Wiki 2.20.1 before 2.26.2 contains a file disclosure vulnerability in the DataTable embedding that allows attackers who can edit pages, including anonymous users under the default configuration, to read repository-internal files. Attackers can set an absolute src such as /.git/config to render the file as a table, exposing any stored remote credentials.4hCVE-2026-99222——
———In the Linux kernel, the following vulnerability has been resolved:
keys: Protect the read method check against type removal
keyctl_read_key() checks key->type->read without holding key->sem.
A reference keeps the key alive, but does not pin the module containing
its type. A surviving RxRPC key can therefore be read while AF_RXRPC
is being unloaded:
KEYCTL_READ task Module unload and key GC
---------------- ------------------------
lookup_user_key()
permission / possession checks
load key->type
af_rxrpc_exit()
unregister_key_type()
GC: down_write(key->sem)
GC: retype to key_type_dead
GC: up_write(key->sem)
unregister_key_type() returns
free_module()
read saved type's read member
The final access can read freed module storage. The read invocation in
__keyctl_read_key() is already protected by key->sem, but the earlier
method check is outside that critical section.
Move the method check into __keyctl_read_key(), after key_validate() and
under its existing read hold on key->sem. The check and invocation then
use the same protected type for length queries and every read retry.
The GC cannot retype the key until the semaphore is released, and type
unregistration waits for that GC pass before the module can be freed.
Return -EOPNOTSUPP when validation succeeds and the type has no read
method. A temporary buffer may now be allocated before this result;
allocation and copying to userspace remain outside the semaphore.4hCVE-2026-99223——
———In the Linux kernel, the following vulnerability has been resolved:
keys: make keyring indexes independent of kernel addresses
KEYCTL_READ returns the serial numbers in a keyring in associative-array
traversal order. The first word of the index is a public, deterministic
hash of the type pointer, domain pointer and description. An unprivileged
user can therefore insert keys with known descriptions, predict their
order for each possible KASLR slide, and recover the kernel image address.
On an x86-64 build with 16 MiB alignment, 45 user keys suffice to
distinguish the candidate slides.
Remove the addresses from the whole index, not just its first hash word.
Assign each key type and domain a nonzero 64-bit ID and hash those IDs and
the description with a once-initialized SipHash key. Use the full IDs in
the later index chunks as well. Truncating or hashing the IDs there would
lose the guarantee that distinct type/domain/description tuples have a
differing index bit.
Allocate IDs lazily since private key types need not be registered. Cache
them in the index key so tree walks and copies of an existing index do not
need to dereference a type descriptor that may have been unregistered.
Keep the 32-bit chunk layout and diff_objects() bit offsets consistent,
and retain the separate root slot for keyrings used by recursive search.
The key comparison, permissions and userspace data format are unchanged;
only the address-dependent in-memory ordering is replaced.4hCVE-2026-16306——
———Remote Code Execution in the `IModular.exe` URI handler in INFINITT Healthcare Co., Ltd. INFINITT PACS allows a remote unauthenticated attacker to invoke unintended application functionality and potentially execute arbitrary code via a crafted `imodular:// URI` containing attacker-controlled command and argument parameters.4hCVE-2026-992247.0 HIG—
———In the Linux kernel, the following vulnerability has been resolved:
keys: Protect the type name while describing a key
keyctl_describe_key() must keep the key type's name alive until
kasprintf() has consumed it. The retained key reference keeps the key
and its description alive, but does not pin the module providing its
type. The name is passed to kasprintf() without holding key->sem.
kvasprintf() uses the saved name pointer in two formatting passes, with
a GFP_KERNEL allocation between them. With AF_RXRPC=m, a task that
passes View permission before type retirement can overlap a privileged
module unload in this order:
1. KEYCTL_DESCRIBE looks up the key, saves key->type->name in the
kasprintf() arguments and completes the first formatting pass.
2. While the formatter is delayed before its second pass,
af_rxrpc_exit() calls unregister_key_type(), which removes the type
from the registry and waits for key_gc_keytype().
3. The collector takes key->sem for writing, retypes the retained key
to key_type_dead and completes retirement. Unregistration and module
exit return, allowing free_module() to release the type and name.
4. The formatter resumes its second pass and reads the saved name from
released module storage, which can fault in string().
Hold key->sem for reading across kasprintf(). The collector then cannot
retype the key or complete retirement until both formatting passes have
finished. If retirement wins the lock first, formatting uses the core
key_type_dead name instead. Release the semaphore immediately after
kasprintf(), including on allocation failure, before copying to
userspace.
Oops report as below:
BUG: unable to handle page fault for address: fffffbfff8054794
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
RIP: 0010:string+0x23f/0x470
Call Trace:
vsnprintf+0x330/0x11104hCVE-2026-888119.1 CRI—
———Missing filtering in the SUSE Rancher Manager meta proxy could cause passed in rancher credentials to be leaked to cloud providers. This affects SUSE Rancher 2.15.0 up to 2.15.3, 2.14.0 up to 2.14.7, 2.13.0 up to 2.13.11,3hCVE-2026-99242——
———In the Linux kernel, the following vulnerability has been resolved:
ntfs: fix race between fallocate and mmap reads
The fallocate implementation only takes invalidate_lock for punch hole,
collapse range, and insert range operations. For standard allocation modes
(mode == 0, FALLOC_FL_KEEP_SIZE), the lock is not held.
During ntfs_attr_fallocate(), new clusters are mapped to the runlist via
ntfs_attr_map_cluster() before being zeroed by ntfs_dio_zero_range(). This
creates a window where concurrent mmap page faults can read uninitialized
disk data.
Since mmap uses filemap_fault() which takes invalidate_lock in shared mode,
it can fault in pages during this window and expose old disk contents to
userspace. This is an information leak and data integrity issue.
Fix by taking invalidate_lock for all fallocate operations, not just for
punch/collapse/insert modes. This prevents concurrent page faults from
accessing unzeroed clusters during the allocation window.4hCVE-2026-99225——
———In the Linux kernel, the following vulnerability has been resolved:
keys: Check the authorization payload in process keyring searches
An authorization payload and its saved credentials must remain valid
while search_process_keyrings_rcu() searches the requestor's keyrings.
The function validates the authorization key, then separately loads
payload.data[0] and unconditionally reads rka->cred. Validation does
not prevent request_key_auth_revoke() from clearing the payload.
A request-key helper can assume authority and fork a descendant that
inherits the authorization key. If the descendant misses in its own
keyrings, it falls back to the saved requestor credentials. Successful
target instantiation invalidates the authorization key without clearing
the payload. After the helper exits, UMH_WAIT_PROC returns to the
requester, which calls complete_request_key() and revokes that key.
With the descendant paused after validation, the paths can interleave
as follows:
1. The descendant enters search_process_keyrings_rcu() under RCU and
key_validate() succeeds.
2. The helper instantiates the target, invalidates the authorization
key, and exits.
3. The requester resumes from UMH_WAIT_PROC, calls
complete_request_key(), and revokes the authorization key.
request_key_auth_revoke() sets its payload pointer to NULL.
4. The descendant loads NULL and dereferences rka->cred.
This NULL dereference can oops the kernel. RCU delays payload disposal
but does not prevent the pointer from being cleared.
Load the payload with dereference_key_rcu() and require a non-NULL
result before validating the authorization key and searching its saved
credentials. A non-NULL payload and its credentials remain alive for
the caller's RCU read-side section; a cleared payload skips the fallback
search and follows the existing error selection.
KASAN report as below:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
RIP: 0010:search_process_keyrings_rcu+0x32b/0x7904hCVE-2026-99226——
———In the Linux kernel, the following vulnerability has been resolved:
keys: Avoid the owner account dereference in named keyring lookup
Named keyring lookup must keep the storage containing the owner UID
alive through the namespace mapping check. find_keyring_by_name()
reads keyring->user->uid under keyring_name_lock, but that lock protects
the keyring's name entry and allocation, not its separate key_user.
A named session-keyring join can overlap a privileged KEYCTL_CHOWN on
another CPU. If the keyring holds the last reference to its old dynamic
key_user and the ownership transfer succeeds, the following ordering is
possible:
Named join Chown
find_keyring_by_name() keyctl_chown_key()
read_lock(keyring_name_lock) down_write(key->sem)
load old keyring->user
replace key->user and key->uid
up_write(key->sem)
key_put(key)
key_user_put(old user): free
read old user->uid
read_unlock(keyring_name_lock)
Chown neither takes keyring_name_lock nor key_session_mutex, so it can
free the old account between the pointer load and the UID read. The
lookup then reads freed memory even though the keyring itself is alive.
Use keyring->uid for the mapping check. key_alloc() initializes this
inline owner UID and keyctl_chown_key() updates it on chown.
The existing name lock keeps its containing keyring allocated throughout
the check, so lookup no longer depends on the account's lifetime. This
also matches the owner UID used by the permission check.
KASAN report as below:
BUG: KASAN: slab-use-after-free in find_keyring_by_name+0x577/0x5d0
Read of size 4 at addr ffff8881128ae2ec by task keycase/5004hCVE-2026-1057699.3 CRI—
———kaniko before 1.25.20 can send a Microsoft Entra ID (Azure AD) access token for Azure Resource Manager to an attacker-controlled registry host. kaniko uses the Azure Container Registry credential helper github.com/chrismellard/docker-credential-acr-env, which decides whether a host is an ACR registry with an unanchored regular expression, so any hostname containing .azurecr.io, .azurecr.cn, .azurecr.de or .azurecr.us is accepted. kaniko consults this helper for any registry that has no credentials in the Docker config and is not a Google or Amazon ECR registry, before contacting the registry. A Dockerfile that references an image on a lookalike host, such as FROM x.azurecr.io.attacker.com/img or COPY --from=<image>, causes the helper to obtain a token from the build's Azure identity (service principal environment variables, federated workload identity token, or managed identity) and POST it to https://<host>/oauth2/exchange. The attacker can use the token against Azure Resource Manager with the identity's role assignments until it expires, and can exchange it for credentials to any ACR registry the identity can access. No RUN instruction or push is required. This issue is fixed in 1.25.20.3hCVE-2026-106803——
———A stack-based buffer overflow exists in Kamailio v6.1.3 and v6.1.4 in the ims_registrar_pcscf module. When processing a crafted application/reginfo+xml NOTIFY message, process_contact() copies an attacker-controlled port value from the alias parameter into a fixed 5-byte stack buffer without validating its length. An unauthenticated remote attacker can trigger stack corruption and terminate the P-CSCF process, resulting in denial of service.3hCVE-2026-21026.1 MED—
———wrensec-commons contains a reflected cross-site scripting (XSS) vulnerability in the CREST framework's HTTP binding. The HttpUtils.prepareResponse() method used the _mimeType request parameter to set the Content-Type response header without proper sanitization. By sending a GET request with _mimeType=text/html, an attacker could cause the browser to interpret a CREST JSON response as HTML, enabling execution of arbitrary JavaScript in the victim's browser. The vulnerability is exploitable by tricking a user into visiting a crafted URL targeting any deployed CREST endpoint. The issue is fixed in versions 22.6.2 and 23.0.0.3hCVE-2026-992277.8 HIG—
———In the Linux kernel, the following vulnerability has been resolved:
io_uring/waitid: prevent cancel reference wrap
io_waitid packs the cancellation state into bit 31 of ->refs and uses
bits 30:0 as a 31-bit reference counter:
#define IO_WAITID_CANCEL_FLAG BIT(31)
#define IO_WAITID_REF_MASK GENMASK(30, 0)
__io_waitid_cancel() marks a request canceled, then increments the low
bits of ->refs to claim completion ownership. When another path owns the
request, the increment remains even though cancellation returns false.
The request remains discoverable by cancellation, so repeated failed
attempts can wrap the 31-bit reference field to zero. A later
cancellation can claim ownership and complete the request a second time.
Use atomic_fetch_or() when setting the cancel flag and inspect the old
flag value. The first cancel attempt continues to the existing ownership
increment, preserving its wake and issuer handoff semantics. Later
attempts see the cancel flag and return without incrementing the
reference field.
This makes repeated failed cancellation attempts idempotent while
leaving the first-cancel state transitions unchanged.4hCVE-2026-778769.8 CRI—
———Control Web Panel (CWP) before webpanel_version 1.16 contains an OS command injection vulnerability in the protected_directory user panel module that allows attackers to execute arbitrary commands by submitting unescaped input through the file POST parameter in the acc=deletedp action. Attackers can exploit this flaw, which passes attacker-controlled input directly into a shell_exec call, to achieve code execution in the user panel context.4hCVE-2026-99228——
———In the Linux kernel, the following vulnerability has been resolved:
io_uring/io-wq: don't lose the signal that ends work
When a thread exits, only its tracked requests are cancelled. Then its
io-wq is torn down. io_wq_exit_workers() signals every worker, to get it
out of an interruptible sleep, and waits for all of them to exit. Before
they do, they go through the work that is left. Unbounded work is
cancelled. Bounded work is run, as it is expected to end by itself.
Not all of it does. An open has no file yet, so it counts as bounded, and
the open of a FIFO waits for the other end. That is what the signal is for.
But the workers are signalled once, and a worker that hasn't started the
work by then loses the signal:
io_wq_exit_workers() io_worker_handle_work()
io_wq_worker_wake()
set TIF_NOTIFY_SIGNAL
io_assign_current_work()
io_run_task_work()
clear TIF_NOTIFY_SIGNAL
io_wq_submit_work()
fifo_open()
wait_for_partner()
wait_for_completion_timeout()
The thread never gets out of do_exit():
IORING_OP_OPENAT of a FIFO without a writer, IOSQE_ASYNC
exit of the thread that has submitted it
hangs in more than 9 of 10 attempts (4 CPUs, KVM), until the process is
killed.
Set TIF_NOTIFY_SIGNAL for bounded work that is started with IO_WQ_BIT_EXIT
set. The bit is set before the workers are signalled, and it is tested
after the flag has been cleared, with clear_notify_signal() providing the
barrier. So either the flag stays, or the bit is seen.
Work that is started while the io-wq exits is treated like work that is
being run at that time: it isn't interrupted unless it waits
interruptibly.4hCVE-2026-118052——
———In Eclipse ThreadX versions 6.0.1 through 6.5.2.202603, the Module Manager loaders return an overflow error without releasing the Module Manager mutex when a module preamble declares a data or stack size that overflows the allocation arithmetic. Loading such an image blocks every later module load, start, stop and unload from other threads until the system is reset.3hCVE-2025-714503.3 LOW—
———inih before r63 contains a one-byte stack buffer under-read in ini_parse_stream() in ini.c that allows attackers to read abyss[-1] via an embedded NUL byte after an overlong line. Attackers can supply an INI file or string with a line of at least INI_MAX_LINE-1 bytes followed by a NUL byte, causing undefined behavior reported by memory sanitizers.5hCVE-2025-62819——
———Keyfactor EJBCA through 9.3.3 performs insufficient authorization checks when self-renewing a client certificate via the RA (Registration Authority) User Interface. This allows a remote user, authenticated with a valid client certificate, to renew their certificate even if the end entity status and/or profile settings should deny renewal. The attacker must have a valid TLS client certificate, and must be authorized to use the RA User Interface, either with the certificate, or via a role membership for PublicAccessAuthenticationToken.4hCVE-2026-1203187.2 HIG—
———Product Gallery Slider & Additional Variation Images for WooCommerce 2.3.23 before 2.3.26 contains a missing authorization vulnerability in Codestar backup AJAX actions csf-export, csf-import and csf-reset. Shop Managers can read the csf_backup_nonce from the settings page and supply arbitrary option names via the 'unique' parameter to read, overwrite or delete WordPress options, including modifying wp_user_roles to escalate to administrator.5hCVE-2026-749937.5 HIG—
———Improper neutralization of special elements used in an SQL command ('SQL injection') vulnerability in Starnet Computer and Network Systems Inventory Tracking Application allows SQL Injection.
This issue affects Inventory Tracking Application: through 2026-10-16.3hCVE-2026-1204636.5 MED—
———Warracker before 1.0.4 contains a missing authorization vulnerability in its Paperless-ngx integration that allows an authenticated, non-administrative user to bypass document ownership restrictions by searching for and linking another user's private document ID to a warranty they own using the `other` document type. Attackers can exploit insufficient authorization checks in the `paperless_search_and_link()` and `serve_paperless_document()` route handlers in file_routes.py to retrieve and disclose private documents belonging to another user via the shared Paperless-ngx API credential, resulting in unauthorized read access and confidentiality loss.6hCVE-2026-1204256.5 MED—
———Chatify before 1.6.4 contains an authorization bypass vulnerability in the Pusher channel authorization endpoint that allows authenticated users to subscribe to other users' private channels by supplying arbitrary channel names. Attackers can request a signature for private-chatify.<victim id> via POST /chat/auth to receive the victim's incoming private messages and attachments in real time.4hCVE-2026-114364——
———Improper neutralization of special elements used in an SQL command ('SQL injection') vulnerability in Apache Syncope.
This CVE covers an incomplete fix for CVE-2026-77051: an administrator with adequate entitlements can achieve execution of arbitrary SQL via stacked queries, leveraging unsanitized opEvent parameters.
Reference: https://cve.org/CVERecord?id=CVE-2026-77051
This issue affects Apache Syncope: from 3.0.0-M0 through 3.0.16, from 4.0.0-M0 through 4.0.8, from 4.1.0-M0 through 4.1.3.
Users are recommended to upgrade to version 4.0.9 / 4.1.4, which fix this issue.5hCVE-2026-1204267.5 HIG—
———OpenCSG CSGHub through v2.6.0-ce contains an authorization bypass vulnerability in the unauthenticated file resolve route that allows remote attackers to read private repository files. Attackers can inject a percent-encoded current_user parameter into the file path, which the portal forwards with its server API key, to read files in private model, code or space repositories.5hCVE-2026-113687——
———Improper isolation or compartmentalization vulnerability in Apache Syncope.
An administrator with adequate entitlements for Implementations can create a malicious Groovy class running untrusted code on a separate Thread, thus bypassing the Groovy security sandbox.
This issue affects Apache Syncope: from 3.0.0-M0 through 3.0.16, from 4.0.0-M0 through 4.0.8, from 4.1.0-M0 through 4.1.3.
Users are recommended to upgrade to version 4.0.9 / 4.1.4, which fix this issue.5hCVE-2026-113511——
———Authorization bypass through User-Controlled key vulnerability in Apache Syncope.
A delegated administrator can relocate a Realm subtree across administrative realm boundaries without permission for the destination
This issue affects Apache Syncope: from 3.0.0-M0 through 3.0.16, from 4.0.0-M0 through 4.0.8, from 4.1.0-M0 through 4.1.3.
Users are recommended to upgrade to version 4.0.9 / 4.1.4, which fix this issue.5hCVE-2026-1204274.3 MED—
———MrDoc through 1.1.1 contains a missing authorization vulnerability in the get_doctemp view that allows authenticated users to read other users' document templates. Attackers can enumerate the sequential doctemp_id POST parameter to retrieve the private template content of every user on the instance.5hCVE-2026-1204286.1 MED—
———PandaWiki 3.65.0 through 3.87.5 contains a stored cross-site scripting vulnerability that allows unauthenticated attackers to upload HTML files with image extensions via /share/v1/common/file/upload. Attackers can lure administrators to /static-file/<key>?a=.pdf, bypassing the nginx attachment header to serve HTML inline and steal the panda_wiki_token JWT for session takeover.5hCVE-2026-1204297.1 HIG—
———Camaleon CMS before 2.9.2 contains a missing authorization vulnerability in Admin::MediaController that allows low-privileged authenticated users to bypass the role-based Media permission. Attackers can POST to /admin/media/upload to store files, read private media via download_private_file, and use crop with saved_avatar to change other users' avatars.4hCVE-2026-1204305.4 MED—
———Camaleon CMS before 2.9.2 contains an insecure direct object reference vulnerability in Admin::CategoriesController that allows authenticated users to modify unauthorized categories by referencing arbitrary category IDs. Users authorized for one post type can send update or destroy requests pairing another category ID with their authorized post_type_id to rename or delete categories.5hCVE-2026-111959——
———Out-of-bounds read vulnerability in Apache Arrow Rust (`arrow` crate), from version 33.0.0 through to versions 57.3.1, 58.4.0, 59.3.1 and 60.0.0.
Improper validation of RunEndEncoded arrays in the ArrayData interface can allow reading data beyond the bounds of the child values array.
Users are recommended to upgrade to versions 60.1.0, 59.3.2, 58.4.1, 57.3.2 which fixes the issue.6hCVE-2026-110535——
———Improper Privilege Management vulnerability in Apache Syncope.
AuthProfile self-updates allow non-admin users to configure impersonation for WA surrogate authentication.
This issue affects Apache Syncope: from 3.0.12 through 3.0.16, from 4.0.0-M0 through 4.0.8, from 4.1.0-M0 through 4.1.3.
Users are recommended to upgrade to version 4.0.9 / 4.1.4, which fix this issue.5h