CVE Watch357,370 in full archive

Vulnerabilities exploitable today

357,370in current view

Single score combining CVSS, KEV membership and EPSS. Every CVE with its own record — timeline from publication to active exploitation.

In KEV catalog1,662

New KEV · 24H0

Exploit Today ≥ 701,605

Distribution · last window

Critical
2,576
High
10,966
Medium
6,904
Low
671

Filters

Window

Severity

Flags

Vulnerabilities357,121–357,160 · 357,370

CVECVSSEPSSKEVRExploitTitleMod.

CVE-2026-68317—

—

———In the Linux kernel, the following vulnerability has been resolved: pds_core: fix auxiliary device add/del races Two paths add or delete the same slot (pf->vfs[vf_id].padev): a VF's pdsc_reset_done() and the PF's devlink enable_vnet/disable_vnet handler. They serialize on config_lock, but neither guards the slot under it correctly. add() registers and stores a new auxiliary device without first checking the slot, so a second add of an already-populated slot leaks the first device. del() makes that check outside config_lock, so two concurrent dels can both pass it; the first clears the slot, and the second dereferences a NULL pointer. Check and update the slot under config_lock in both paths.9h CVE-2026-68316—

—

———In the Linux kernel, the following vulnerability has been resolved: accel: ethosu: Fix element size accounting for cmd stream validation There are 2 issues with the element size handling in the command stream validation which result in too small of a size calculated when the element size is 16/32/64 bits. For NHWC format, the element size is simply missing from the calculation. The bitfield for the element size is different between IFM/IFM2 and OFM. IFM and IFM2 encode the precision in parameter bits 2:3, while OFM uses bits 1:2.9h CVE-2026-68330—

—

———In the Linux kernel, the following vulnerability has been resolved: net: airoha: Fix DMA direction for NPU mailbox buffer airoha_npu_send_msg() always maps the mailbox buffer with DMA_TO_DEVICE, but some callers expect the NPU to write response data back into the same buffer: - airoha_npu_wlan_msg_get() (NPU_OP_GET): NPU writes response into the buffer, then the caller reads it via memcpy() - airoha_npu_ppe_stats_setup() (NPU_OP_SET): NPU writes back npu_stats_addr field in the response On non-cache-coherent architectures like EN7581 (Cortex-A53 without hardware cache coherency for NPU DMA), DMA_TO_DEVICE unmap is a no-op — it does not invalidate the CPU cache. If the NPU-written cache line is still present in the CPU cache when the caller reads the buffer, the CPU observes stale data instead of the NPU response. This is a timing-sensitive bug: small mailbox buffers (~24 bytes) typically fit in a single cache line and may survive in the cache until the caller reads them, producing silent data corruption rather than a crash. The bug is more likely to trigger when the caller reads the response immediately after dma_unmap_single() without intervening cache-evicting operations. Fix by using DMA_BIDIRECTIONAL for both map and unmap, which ensures dma_unmap_single() invalidates the CPU cache on non-coherent systems. The mailbox buffers are small so there is no performance concern.9h CVE-2026-68331—

—

———In the Linux kernel, the following vulnerability has been resolved: dpaa2-eth: put MAC endpoint device on disconnect fsl_mc_get_endpoint() returns the MAC endpoint device with a reference taken through device_find_child(). The Ethernet connect path stores that device in mac->mc_dev and keeps it for the lifetime of the connected MAC object. However, the disconnect path only disconnects and closes the MAC before freeing the dpaa2_mac object. It does not drop the endpoint device reference stored in mac->mc_dev, so every successful connect leaks that device reference when the MAC is later disconnected. Drop the endpoint device reference after closing the MAC and before freeing the dpaa2_mac object.9h CVE-2026-68315—

—

———In the Linux kernel, the following vulnerability has been resolved: sctp: validate stream count in sctp_process_strreset_inreq() When processing a RESET_IN_REQUEST from a peer, sctp_process_strreset_inreq() derives the stream count from the parameter length but does not check whether the resulting RESET_OUT_REQUEST would exceed SCTP_MAX_CHUNK_LEN. The OUT request header (sctp_strreset_outreq, 16 bytes) is 8 bytes larger than the IN request header (sctp_strreset_inreq, 8 bytes). Generally, the IP payload is bounded to 65535 bytes, so the stream list cannot be large enough to trigger the overflow. However, on interfaces with MTU > 65535 (e.g., loopback with IPv6 jumbograms), a stream list that fits within the incoming IN parameter can cause a __u16 overflow in sctp_make_strreset_req() when computing the OUT request size, leading to an undersized skb allocation and a kernel BUG: net/core/skbuff.c:207 skb_panic net/core/skbuff.c:2625 skb_put net/sctp/sm_make_chunk.c:1535 sctp_addto_chunk net/sctp/sm_make_chunk.c:3695 sctp_make_strreset_req net/sctp/stream.c:655 sctp_process_strreset_inreq The local setsockopt path validates the generated reset request size. However, for an incoming-only reset, it accounts for the smaller IN request even though the peer must generate an OUT request with the same stream list. Such a request cannot be completed successfully by the peer. Reject peer IN requests whose corresponding OUT request would exceed SCTP_MAX_CHUNK_LEN. Also tighten the local check so it does not send an IN request that would require an oversized OUT request from the peer.9h CVE-2026-68314—

—

———In the Linux kernel, the following vulnerability has been resolved: net: mctp i3c: clean up notifier and buses if driver register fails mctp_i3c_mod_init() registers the I3C bus notifier and then walks the existing buses with i3c_for_each_bus_locked(mctp_i3c_bus_add_new, NULL) before registering the I3C device driver. If i3c_driver_register() fails, the function returns the error directly, leaving the notifier registered and every mctp_i3c_bus object created for the existing buses allocated. The notifier is left pointing into the module that failed to load and the bus list is leaked. Mirror the module exit path on this failure: unregister the notifier and tear down the buses that were added before returning the error. This issue was identified during our ongoing static-analysis research while reviewing kernel code.9h CVE-2026-68313—

—

———In the Linux kernel, the following vulnerability has been resolved: tipc: fix infinite loop in __tipc_nl_compat_dumpit cmd->dumpit callback can return a negative errno, causing an infinite loop due to the while(len) condition. As the loop never terminates, genl_mutex is never released, and other tasks waiting on it starve in D state. Check dumpit's return value, propagate it and jump to err_out on error.9h CVE-2026-68332—

—

———In the Linux kernel, the following vulnerability has been resolved: net: airoha: Fix potential use-after-free in airoha_ppe_deinit() airoha_ppe_deinit() replaces the NPU pointer with NULL via rcu_replace_pointer() but does not wait for existing RCU readers to exit before calling ppe_deinit() and airoha_npu_put(). This can cause a use-after-free if a reader in an RCU read-side critical section still holds a reference to the NPU when it is freed. The init path (airoha_ppe_init) already calls synchronize_rcu() after rcu_assign_pointer(), but the deinit path introduced in commit 6abcf751bc08 ("net: airoha: Fix schedule while atomic in airoha_ppe_deinit()") omitted the matching barrier when switching from rcu_read_lock()/rcu_dereference() to rcu_replace_pointer(). Add synchronize_rcu() before ppe_deinit() to ensure all existing RCU readers have completed before the NPU resources are released.9h CVE-2026-68312—

—

———In the Linux kernel, the following vulnerability has been resolved: cifs: fix cifsFileInfo leak on kmalloc failure in deferred close drain paths In cifs_close_deferred_file(), cifs_close_all_deferred_files(), and cifs_close_deferred_file_under_dentry(), when a pending deferred close is cancelled via cancel_delayed_work(), the subsequent kmalloc_obj() to add the file to the local processing list may fail under memory pressure. The loop breaks immediately, but the cancelled work is no longer pending (it would have called _cifsFileInfo_put()), and the cfile is never added to file_head for processing. The cifsFileInfo reference and the open server handle both leak. Fix by saving the cfile that failed allocation in a local variable, breaking as before, and calling _cifsFileInfo_put() on it after releasing the lock. Any files later in the iteration are unaffected since their deferred work is still pending and will fire normally.9h CVE-2026-68333—

—

———In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: put MAC endpoint device on disconnect fsl_mc_get_endpoint() returns the MAC endpoint device with a reference taken through device_find_child(). The switch port connect path stores that device in mac->mc_dev and keeps it for the lifetime of the connected MAC object. However, the disconnect path only closes the MAC and frees the dpaa2_mac object. It does not drop the endpoint device reference stored in mac->mc_dev, so every successful connect leaks that device reference when the MAC is later disconnected. Drop the endpoint device reference before freeing the dpaa2_mac object.9h CVE-2026-68311—

—

———In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: guard link STA in decap offload mt7925_sta_set_decap_offload() iterates over the vif valid_links mask when updating decap offload state for an MLO station. The station may not have a link STA for every valid link of the vif, so mt792x_sta_to_link() can return NULL for a link that belongs to the vif but not to the station. The function currently dereferences mlink before checking whether the link WCID is ready. If mlink is NULL, setting or clearing MT_WCID_FLAG_HDR_TRANS dereferences a NULL pointer. Skip links without a station link before touching mlink->wcid.9h CVE-2026-68310—

—

———In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: guard HE capability lookups mt7915_mcu_bss_he_tlv() and mt7915_mcu_sta_bfer_tlv() both run after checking HE support, then dereference the HE PHY capability returned by mt76_connac_get_he_phy_cap(). That helper can return NULL when no capability entry matches the vif type. Fetch the capability before appending the TLV and skip the HE-specific setup when no matching capability is available.9h CVE-2026-68334—

—

———In the Linux kernel, the following vulnerability has been resolved: rxrpc: fix io_thread race in rxrpc_wake_up_io_thread() rxrpc_wake_up_io_thread() checks local->io_thread before waking it, but then reloads the pointer for wake_up_process(). local->io_thread is cleared with WRITE_ONCE() when the I/O thread exits, so the second load can see NULL even if the first load did not. Take a READ_ONCE() snapshot and use it for both the NULL check and the wake_up_process() call, as rxrpc_encap_rcv() already does.9h CVE-2026-68309—

—

———In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: connac: fix possible NULL-pointer deref in mt76_connac_mcu_uni_bss_he_tlv() mt76_connac_get_he_phy_cap routine can theoretically return NULL so check cap pointer before dereferencing it.9h CVE-2026-68308—

—

———In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: check pointer returned by mt76_connac_get_he_phy_cap() mt76_connac_get_he_phy_cap routine can theoretically return NULL so check cap pointer before dereferencing it.9h CVE-2026-68307—

—

———In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: fix crash in reset link replay During reset recovery, mt7925_vif_connect_iter() replays firmware state for links tracked in mvif->valid_links. After MLO link changes or MCU timeout recovery, the driver bitmap can temporarily contain a link whose mac80211 bss_conf has already gone away. This can pass a NULL bss_conf to mt76_connac_mcu_uni_add_dev(), matching the crash where x1, the second argument, is NULL: pc : mt76_connac_mcu_uni_add_dev+0x8c/0x1f8 [mt76_connac_lib] lr : mt7925_vif_connect_iter+0x9c/0x168 [mt7925_common] x2 : ffffff80a77f6018 x1 : 0000000000000000 x0 : ffffff8099402080 Call trace: mt76_connac_mcu_uni_add_dev+0x8c/0x1f8 [mt76_connac_lib] mt7925_vif_connect_iter+0x9c/0x168 [mt7925_common] mt7925_mac_reset_work+0x264/0x2f8 [mt7925_common] Skip missing bss_conf entries before replaying the link. Non-MLO AP/STA reset replay is unchanged because the helper still returns &vif->bss_conf for the legacy link.9h CVE-2026-68306—

—

———In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: fix possible NULL-pointer deref in mt7996_mcu_sta_bfer_eht() mt76_connac_get_eht_phy_cap routine can theoretically return NULL so check cap pointer before dereferencing it.9h CVE-2026-68305—

—

—

———In the Linux kernel, the following vulnerability has been resolved: rds: drop incoming messages that cross network namespace boundaries rds_find_bound() looks up the destination socket using a global rhashtable keyed solely on (addr, port, scope_id). Network namespaces are not part of the key, so a sender in netns A can deliver an incoming message (inc) to a socket that lives in a different netns B. When this happens, inc->i_conn points to an rds_connection whose c_net is netns A, but the receiving rs lives in netns B. Once the child process that created netns A exits, cleanup_net() calls rds_loop_exit_net() -> rds_loop_kill_conns() -> rds_conn_destroy(), freeing that connection. If the survivor socket in netns B still holds the inc, any subsequent dereference of inc->i_conn is a use-after-free. There are two dangerous sites in rds_clear_recv_queue(): 1. inc->i_conn->c_lcong (offset 88 of freed rds_connection, size 200) read via rds_recv_rcvbuf_delta() -- confirmed by KASAN. 2. inc->i_conn->c_trans->inc_free(inc) (function pointer at offset 80) called via rds_inc_put() when the inc refcount reaches zero -- same race window, potential call-through-freed-object primitive. The bug is reachable from unprivileged user namespaces (CLONE_NEWUSER + CLONE_NEWNET), available since Linux 3.8. Fix this by rejecting the delivery in rds_recv_incoming() when the socket returned by rds_find_bound() belongs to a different network namespace than the connection that carried the message. Use the existing rds_conn_net() / sock_net() helpers and net_eq() for the comparison.9h CVE-2026-68304—

—

———In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix 802.1X-SHA256 call trace warning Based on wpa_auth as 1x_256 mode, need to set up "use_fwsup" with BRCMF_PROFILE_FWSUP_1X. Or it will happen trace warning when call brcmf_cfg80211_set_pmk(). [ 4481.831101] ------------[ cut here ]------------ [ 4481.831102] WARNING: CPU: 1 PID: 2997 at drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:7242 brcmf_cfg80211_set_pmk+0x77/0xd0 [brcmfmac] [...] [ 4481.831202] Call Trace: [ 4481.831204] <TASK> [ 4481.831205] nl80211_set_pmk+0x183/0x250 [cfg80211] [ 4481.831233] genl_family_rcv_msg_doit+0xea/0x150 [ 4481.831237] genl_rcv_msg+0x104/0x240 [ 4481.831239] ? cfg80211_probe_status+0x2c0/0x2c0 [cfg80211] [ 4481.831257] ? genl_family_rcv_msg_doit+0x150/0x150 [ 4481.831259] netlink_rcv_skb+0x4e/0x100 [ 4481.831261] genl_rcv+0x24/0x40 [ 4481.831262] netlink_unicast+0x236/0x380 [ 4481.831264] netlink_sendmsg+0x250/0x4b0 [ 4481.831266] sock_sendmsg+0x5c/0x70 [ 4481.831269] ____sys_sendmsg+0x236/0x2b0 [ 4481.831271] ? copy_msghdr_from_user+0x6d/0xa0 [ 4481.831272] ___sys_sendmsg+0x86/0xd0 [ 4481.831274] ? avc_has_perm+0x8c/0x1a0 [ 4481.831276] ? preempt_count_add+0x6a/0xa0 [ 4481.831279] ? sock_has_perm+0x82/0xa0 [ 4481.831280] __sys_sendmsg+0x57/0xa0 [ 4481.831282] do_syscall_64+0x38/0x90 [ 4481.831284] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 4481.831286] RIP: 0033:0x7fd270d369b49h CVE-2026-68303—

—

———In the Linux kernel, the following vulnerability has been resolved: drm/vc4: hvs/v3d: Fix null dereference in unbind The hvs and v3d drivers use dev_get_drvdata(master) in their unbind functions. Since the vc4-drm gets removed before its dependent drivers (vc4_hvs/vc4_v3d) the vc4_hvs_unbind/vc4_v3d_unbind functions try to get drvdata of its master and fails with a null dereference error. Use the data pointer passed to the unbind functions directly instead of dev_get_drvdata(master). This avoids using potentially freed memory.9h CVE-2026-68302—

—

———In the Linux kernel, the following vulnerability has been resolved: amt: re-read skb header pointers after every pull Several AMT receive and transmit paths cache a pointer into the skb head (ip_hdr(), ipv6_hdr(), eth_hdr() or the AMT message header) and then call a helper that can reallocate that head before the cached pointer is used again. pskb_may_pull(), ip_mc_may_pull(), ipv6_mc_may_pull(), iptunnel_pull_header(), ip_mc_check_igmp() and ipv6_mc_check_mld() can all free the old head and move the data, so a pointer taken before the call dangles afterwards and the later access is a use-after-free of the freed head. The affected sites are: amt_rcv() caches ip_hdr() before amt_parse_type() pulls, then reads iph->saddr. amt_dev_xmit() caches ip_hdr()/ipv6_hdr() before ip_mc_check_igmp()/ ipv6_mc_check_mld() and pskb_may_pull(), then reads the group address. amt_multicast_data_handler() caches eth_hdr() before pskb_may_pull(), then writes the L2 header. amt_membership_query_handler() caches the AMT header, the outer and inner eth_hdr() and ip_hdr() before iptunnel_pull_header() and several pulls, then reads and writes them. amt_igmpv3_report_handler() and amt_mldv2_report_handler() cache ip_hdr()/ipv6_hdr() and the current group record and read the record count from the report header inside the record loop, across the *_mc_may_pull() calls. amt_update_handler() caches ip_hdr() and the AMT membership-update header before pskb_may_pull(), iptunnel_pull_header(), ip_mc_check_igmp() and the report handler, then reads iph->daddr and amtmu->nonce / amtmu->response_mac. Fix each site by either snapshotting the scalar that is used after the pull before the first pull runs, or re-deriving the header pointer from the skb after the last pull that can move the head. Values that are stable across the pull (source and group address, the response MAC and nonce, the record count, the outer source MAC) are snapshotted; pointers that are written through or read repeatedly are re-derived.9h CVE-2026-68301—

—

———In the Linux kernel, the following vulnerability has been resolved: net: hsr: fix memory leak on slave unregistration by removing synced VLANs When an HSR master device is brought UP, it auto-adds VLAN 0 via vlan_vid0_add(), which propagates VID 0 to its slave devices (slave A and B). If a slave device is later unregistered while HSR is active (e.g., during netns cleanup or interface destruction), hsr_del_port() is called to detach the slave port from the HSR master. However, hsr_del_port() currently does not delete the VLAN IDs that were synced to the slave device by HSR. As a result, the slave device retains a refcount on VID 0 (and any other synced VLANs). When the slave device is destroyed, its vlan_info / vlan_vid_info structure remains allocated, leading to a memory leak. Fix this by calling vlan_vids_del_by_dev(port->dev, master->dev) in hsr_del_port() before unlinking slave A or slave B ports, matching the propagation logic in hsr_ndo_vlan_rx_add_vid() / hsr_ndo_vlan_rx_kill_vid() and the cleanup behavior in bonding and team drivers.9h CVE-2026-68300—

—

———In the Linux kernel, the following vulnerability has been resolved: sctp: auth: verify auth requirement when auth_chunk is NULL sctp_auth_chunk_verify() returns true unconditionally when chunk->auth_chunk is NULL, silently skipping authentication. This is incorrect when: 1. skb_clone() failed in the BH receive path, leaving auth_chunk NULL. In sctp_endpoint_bh_rcv() asoc is NULL for new connections, so the early sctp_auth_recv_cid() check cannot catch this. 2. No AUTH chunk precedes COOKIE-ECHO, so skb_clone() is never called and auth_chunk remains NULL. Fix by checking sctp_auth_recv_cid() when auth_chunk is NULL: if authentication is required, return false to drop the chunk; otherwise continue normally.9h CVE-2026-68299—

—

———In the Linux kernel, the following vulnerability has been resolved: vmxnet3: fix BUG_ON in vmxnet3_get_hdr_len() for Geneve packets vmxnet3_get_hdr_len() assumes gdesc->rcd.v4/v6/tcp always describe the outer header, but for a Geneve-encapsulated packet the device can set them based on the inner header instead, signalled by the VMXNET3_RCD_HDR_INNER_SHIFT bit in the completion descriptor. Since the function never skips the outer encapsulation, this mismatch triggers: - BUG_ON(hdr.ipv4->protocol != IPPROTO_TCP), because the outer protocol is UDP (Geneve), not TCP. - BUG_ON(hdr.eth->h_proto != ...), when the tunnel's outer and inner IP versions differ (e.g. outer IPv6/inner IPv4 or vice versa). Check VMXNET3_RCD_HDR_INNER_SHIFT up front and bail out, since the function cannot locate the inner header it would need to parse. Also convert the remaining BUG_ON()s in this function to return 0 defensively.9h CVE-2026-68298—

—

———In the Linux kernel, the following vulnerability has been resolved: drm/xe/vm: Fix SVM leak on resv obj alloc failure in xe_vm_create() Commit 9e9787414882 ("drm/xe/userptr: replace xe_hmm with gpusvm") made xe_svm_init() unconditional in xe_vm_create() and extended it to also initialize a "simple" gpusvm state for non-fault-mode VMs. The matching xe_svm_fini() call in xe_vm_close_and_put() was updated to run unconditionally, but the error unwind path in xe_vm_create() was not. On the drm_gpuvm_resv_object_alloc() failure path, xe_svm_init() has already succeeded but xe_svm_fini() is only called when XE_VM_FLAG_FAULT_MODE is set. For non-fault-mode VMs this leaves vm->svm.gpusvm partially initialized and leaks the resources allocated by drm_gpusvm_init(). For fault-mode VMs, xe_svm_init() additionally acquires the pagemap owner via drm_pagemap_acquire_owner() and the pagemaps via xe_svm_get_pagemaps(). Those resources are released by xe_svm_close(), not xe_svm_fini(). On the same error path, xe_svm_close() is not called either, so fault-mode VMs leak the pagemap owner and pagemaps. Fix both leaks: - Call xe_svm_fini() unconditionally on the err_svm_fini path, matching the unconditional xe_svm_init() call. Move the vm->size = 0 assignment out of the conditional so the xe_vm_is_closed() assert in xe_svm_fini() (and xe_svm_close()) holds for both modes. - Call xe_svm_close() for fault-mode VMs before xe_svm_fini(), matching the ordering used in xe_vm_close_and_put(). (cherry picked from commit ca2a3587d577ba764e0fe628fb676244fc33ddd4)9h CVE-2026-68297—

—

———In the Linux kernel, the following vulnerability has been resolved: tipc: fix u16 MTU truncation in media and bearer MTU validation Both TIPC_NL_MEDIA_SET and TIPC_NL_BEARER_SET accept user-supplied MTU values but only enforce a minimum bound, not a maximum. When a user sets the MTU to a value exceeding U16_MAX (65535), it passes validation but is silently truncated when assigned to u16 fields l->mtu and l->advertised_mtu in tipc_link_create(). Values like 65536 (0x10000) truncate to 0, causing a division by zero in tipc_link_set_queue_limits() which computes TIPC_MAX_PUBL / (l->mtu / ITEM_SIZE). Other overflowing values (e.g. 65537-131071) produce small incorrect MTU values, resulting in link malfunction behaviors. Crash stack (triggered as unprivileged user via user namespace): tipc_link_set_queue_limits net/tipc/link.c:2531 tipc_link_create net/tipc/link.c:520 tipc_node_check_dest net/tipc/node.c:1279 tipc_disc_rcv net/tipc/discover.c:252 tipc_rcv net/tipc/node.c:2129 tipc_udp_recv net/tipc/udp_media.c:392 Two independent paths lack the upper bound check: 1. tipc_udp_mtu_bad() -- called from __tipc_nl_media_set() (MEDIA_SET) 2. inline check in __tipc_nl_bearer_set() at bearer.c:1160 (BEARER_SET) Fix both by rejecting MTU values above U16_MAX.9h CVE-2026-68336—

—

———In the Linux kernel, the following vulnerability has been resolved: bonding: fix devconf_all NULL dereference when IPv6 is disabled When booting with the 'ipv6.disable=1' parameter, the devconf_all is never initialized because inet6_init() exits before addrconf_init() is called which initializes it. bond_send_validate(), however, will still call bond_ns_send_all() even ipv6 is indeed disabled. It will lead to NULL derefence of net->ipv6.devconf_all in ip6_pol_route(). BUG: kernel NULL pointer dereference, address: 000000000000000c [...] Workqueue: bond0 bond_arp_monitor [bonding] RIP: 0010:ip6_pol_route+0x69/0x480 [...] Call Trace: <TASK> ? srso_return_thunk+0x5/0x5f ? __pfx_ip6_pol_route_output+0x10/0x10 fib6_rule_lookup+0xfe/0x260 ? wakeup_preempt+0x8a/0x90 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? sched_balance_rq+0x369/0x810 ip6_route_output_flags+0xd7/0x170 bond_ns_send_all+0xde/0x280 [bonding] bond_ab_arp_probe+0x296/0x320 [bonding] ? srso_return_thunk+0x5/0x5f bond_activebackup_arp_mon+0xb4/0x2c0 [bonding] process_one_work+0x196/0x370 worker_thread+0x1af/0x320 ? srso_return_thunk+0x5/0x5f ? __pfx_worker_thread+0x10/0x10 kthread+0xe3/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x199/0x260 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Fix this by adding ipv6_mod_enabled() condition check in the caller.9h CVE-2026-68296—

—

———In the Linux kernel, the following vulnerability has been resolved: net: gre: fix lltx regression for GRE tunnels with SEQ/CSUM Before commit 00d066a4d4ed ("netdev_features: convert NETIF_F_LLTX to dev->lltx"), NETIF_F_LLTX was set unconditionally in both __gre_tunnel_init() and ip6gre_tnl_init_features() alongside GRE_FEATURES: dev->features |= GRE_FEATURES | NETIF_F_LLTX; When that commit converted NETIF_F_LLTX to the dev->lltx flag, it placed 'dev->lltx = true' after the SEQ/CSUM early returns instead of before them. This causes GRE/GRETAP/ip6gre tunnels with SEQ or CSUM+encap to lose lockless TX, reintroducing _xmit_lock acquisition around their ndo_start_xmit. Since GRE xmit re-enters the stack via ip_tunnel_xmit(), holding _xmit_lock risks ABBA deadlock with the underlay device. CPU0 CPU1 ---- ---- lock(&qdisc_xmit_lock_key#6); lock(&qdisc_xmit_lock_key#3); lock(&qdisc_xmit_lock_key#6); lock(&qdisc_xmit_lock_key#3); Fix by moving dev->lltx = true before the early returns in both functions, restoring the original unconditional behavior.9h CVE-2026-68295—

—

———In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: Zero-extend signed ALU32 div/mod results ALU32 operations write a 32-bit result and leave the upper 32 bits of the BPF register zero. The LoongArch JIT sign-extends the result of signed ALU32 BPF_DIV and BPF_MOD (off=1), so a negative 32-bit quotient or remainder leaves bits 63:32 set in JITted code while the verifier and interpreter model those bits as zero. Keep sign-extension on the operands, which signed divide needs, and zero-extend the ALU32 result after the divide or modulo instruction, matching the unsigned ALU32 div/mod paths and every other ALU32 operation in this JIT.9h CVE-2026-68337—

—

———In the Linux kernel, the following vulnerability has been resolved: bpf: Reject redirect helpers without a bpf_net_context The bpf_redirect*() helpers and skb_do_redirect() obtain the per-task bpf_redirect_info via bpf_net_ctx_get_ri(), which dereferences the current->bpf_net_context unconditionally. That context is established on the paths that run tc BPF such as sch_handle_{ingress,egress}(), *except* for the case where {cls,act}_bpf was attached to a proper qdisc. A program running from there reaches the NULL deref in two ways: * It calls bpf_redirect() directly, which dereferences the context at the top of the helper: tc qdisc add dev eth0 root handle 1: red limit 1MB min 10KB max 20KB \ avpkt 1000 burst 100 qevent early_drop block 10 tc filter add block 10 pref 1 bpf obj redirect.o * It simply returns TC_ACT_REDIRECT without helper call: tcf_qevent_handle() then dispatches to skb_do_redirect(), which dereferences the context Rather than extending bpf_net_context management into the qdisc path, make the redirect helpers refuse to operate when no context exists, and have tcf_qevent_handle() drop a TC_ACT_REDIRECT verdict instead of calling skb_do_redirect(). Previous behaviour was a crash, so nothing regresses by not supporting it.9h CVE-2026-68338—

—

———In the Linux kernel, the following vulnerability has been resolved: net/packet: avoid fanout hook re-registration after unregister packet_set_ring() temporarily detaches a socket from packet delivery while reconfiguring its ring. It records the previous running state, clears po->num, unregisters the protocol hook when needed, drops po->bind_lock, and later restores po->num and re-registers the hook from the saved was_running value. That unlocked window can race with NETDEV_UNREGISTER. The notifier can observe the socket as not running, skip __unregister_prot_hook(), and invalidate the per-socket binding by setting po->ifindex to -1 and clearing po->prot_hook.dev. A one-member fanout group can still retain its shared fanout hook device pointer. When packet_set_ring() resumes, re-registering solely from the stale was_running state can re-add the fanout hook after the device has been unregistered. Treat po->ifindex == -1 as an invalidated binding after reacquiring po->bind_lock. This is distinct from ifindex 0, the normal unbound/wildcard state: ifindex -1 marks an existing device binding that was invalidated when the device was unregistered. Restore po->num as before, but do not re-register the hook if device unregister already detached the socket.9h CVE-2026-68294—

—

———In the Linux kernel, the following vulnerability has been resolved: net: qrtr: restrict socket creation to the initial network namespace QRTR keeps its entire port and node state in module-global variables that are not partitioned per network namespace: qrtr_local_nid is a single global node id (always 1) and qrtr_ports is a single global xarray. qrtr_port_lookup() and qrtr_local_enqueue() operate on that global state with no network-namespace check, and qrtr_create() places no restriction on the namespace a socket is created in. As a result an unprivileged process that creates an AF_QIPCRTR socket in a separate network namespace, e.g. via unshare(CLONE_NEWUSER | CLONE_NEWNET), can send QRTR datagrams - including control-plane messages such as QRTR_TYPE_NEW_SERVER - to QRTR sockets owned by another namespace, and vice versa. The receiving socket sees such a message as coming from node id 1, indistinguishable from a legitimate local client, breaking the isolation that network namespaces are expected to provide. QRTR is a transport to global hardware endpoints (the modem and other remote processors) and has no per-namespace semantics; its in-kernel name service already creates its socket in init_net only. Confine the socket family to the initial network namespace, as other non-namespace-aware socket families do (see llc_ui_create() and the ieee802154 socket code).9h CVE-2026-68293—

—

———In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix MCIA register buffer overflow on 32 dword reads The MCIA register can return up to 32 dwords (128 bytes) when the device advertises the mcia_32dwords capability, but struct mlx5_ifc_mcia_reg_bits only defines dword_0..11, leaving room for just 12 dwords (48 bytes) of data. mlx5_query_mcia() clamps the read size to mlx5_mcia_max_bytes() and then memcpy()s that many bytes out of the register, potentially reading past the end of the 'out' buffer. On kernels built with FORTIFY_SOURCE this is caught as a buffer overflow while reading the module EEPROM via ethtool: detected buffer overflow in memcpy kernel BUG at lib/string_helpers.c:1048! RIP: 0010:fortify_panic+0x13/0x20 Call Trace: mlx5_query_mcia.isra.0+0x200/0x210 [mlx5_core] mlx5_query_module_eeprom_by_page+0x4a/0xa0 [mlx5_core] mlx5e_get_module_eeprom_by_page+0xbb/0x120 [mlx5_core] eeprom_prepare_data+0xf3/0x170 ethnl_default_doit+0xf1/0x3b0 Extend the mcia_reg layout to 32 dwords.9h CVE-2026-68292—

—

———In the Linux kernel, the following vulnerability has been resolved: ice: prevent tstamp ring allocation for non-PF VSI types The pf->txtime_txqs bitmap tracks which Tx queues have ETF (Earliest TxTime First) offload enabled. This bitmap is indexed by queue number and is set by ice_offload_txtime(), which only operates on PF VSI queues. However, ice_is_txtime_ena() does not check the VSI type before consulting the bitmap. When ETF offload is enabled on PF Tx queue 0, bit 0 is set in pf->txtime_txqs. During a subsequent PCI reset rebuild, the CTRL VSI's Tx queue 0 is reconfigured and ice_is_txtime_ena() is called for that ring. Since it only checks pf->txtime_txqs by queue index without distinguishing VSI type, it finds bit 0 set and returns true, matching the PF VSI's ETF queue, not the CTRL VSI's. This causes ice_vsi_cfg_txq() to spuriously allocate a tstamp_ring for the CTRL VSI ring. Since CTRL VSI rings have no associated netdev, ice_clean_tx_ring() takes an early return at the !netdev check before reaching ice_free_tx_tstamp_ring(), leaking the allocation. Each PCI reset leaks one 64-byte tstamp_ring. Fix this by restricting ice_is_txtime_ena() to return true only for PF VSI rings, since txtime_txqs is only meaningful for PF VSI queues.9h CVE-2026-68339—

—

———In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: validate Realtek vendor event length btusb_recv_event_realtek() reads the event code at data[0] and the Realtek subevent code at data[2] before deciding whether to consume a vendor event as a coredump. For example, the two-byte event ff 00 contains a complete vendor-event header declaring zero parameters. The old classifier still reads a nonexistent third byte and can misclassify the event as a coredump if the adjacent byte is 0x34. Require the HCI event header and first parameter to be present before inspecting the Realtek subevent code. Short events continue through the normal HCI receive path, which owns their protocol validation.9h CVE-2026-68291—

—

———In the Linux kernel, the following vulnerability has been resolved: idpf: fix max_vport related crash on allocation error during init Set adapter->max_vports only after successful allocation of vports, netdevs and vport_config buffers. This fixes possible crashes on reset or rmmod, following failed allocation on init [ 305.981402] idpf 0000:83:00.0: enabling device (0100 -> 0102) [ 305.994464] idpf 0000:83:00.0: Device HW Reset initiated [ 320.416872] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 320.416918] #PF: supervisor read access in kernel mode [ 320.416942] #PF: error_code(0x0000) - not-present page [ 320.416963] PGD 2099657067 P4D 0 [ 320.416983] Oops: Oops: 0000 [#1] SMP NOPTI ... [ 320.417093] RIP: 0010:idpf_remove+0x118/0x200 [idpf] [ 320.417130] Code: 8b bb 98 09 00 00 e8 17 0f 5b e5 48 8b bb e8 08 00 00 e8 0b 0f 5b e5 66 83 bb 28 06 00 00 00 48 8b bb 20 06 00 00 74 49 31 ed <48> 8b 04 ef 48 85 c0 74 2f 48 8b 78 20 e8 66 58 91 e5 48 8b 83 20 [ 320.417183] RSP: 0018:ff7322212903fdb8 EFLAGS: 00010246 [ 320.417205] RAX: 0000000000000000 RBX: ff4463de40300000 RCX: ff7322212903fd4c [ 320.417228] RDX: 0000000000000001 RSI: ffffffffa7f7d100 RDI: 0000000000000000 [ 320.417250] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 [ 320.417272] R10: 0000000000000001 R11: ff4463de3a638f58 R12: ff4463be89ac7000 [ 320.417294] R13: ff4463be89ac7198 R14: ff4463be94fc7198 R15: ffffffffc0f10f20 [ 320.417317] FS: 00007f963c0e6740(0000) GS:ff4463fdd65d8000(0000) knlGS:0000000000000000 [ 320.417342] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 320.417362] CR2: 0000000000000000 CR3: 00000020ba674002 CR4: 0000000000773ef0 [ 320.417385] PKRU: 55555554 [ 320.417398] Call Trace: [ 320.417412] <TASK> [ 320.417429] pci_device_remove+0x42/0xb0 [ 320.417459] device_release_driver_internal+0x1a9/0x210 [ 320.417492] driver_detach+0x4b/0x90 [ 320.417516] bus_remove_driver+0x70/0x100 [ 320.417539] pci_unregister_driver+0x2e/0xb0 [ 320.417564] __do_sys_delete_module.constprop.0+0x190/0x2f0 [ 320.417592] ? kmem_cache_free+0x31e/0x550 [ 320.417619] ? lockdep_hardirqs_on_prepare+0xde/0x190 [ 320.417644] ? do_syscall_64+0x38/0x6b0 [ 320.417665] do_syscall_64+0xc8/0x6b0 [ 320.417683] ? clear_bhb_loop+0x30/0x80 [ 320.417706] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 320.417727] RIP: 0033:0x7f963bb30beb9h CVE-2026-68290—

—

———In the Linux kernel, the following vulnerability has been resolved: rds: tcp: unregister sysctl before tearing down listen socket rds_tcp_exit_net() frees the per-netns RDS TCP listen socket via rds_tcp_kill_sock() before unregistering the per-netns sysctl table. Since rds_tcp_skbuf_handler() derives the netns from rtn->rds_tcp_listen_sock->sk, a concurrent sysctl write can race with netns teardown and dereference the freed socket/sk. KASAN reports the race as: BUG: KASAN: slab-use-after-free in rds_tcp_skbuf_handler+0x2aa/0x2e0 rds_tcp_skbuf_handler net/rds/tcp.c:721 proc_sys_call_handler fs/proc/proc_sysctl.c vfs_write fs/read_write.c __x64_sys_pwrite64 fs/read_write.c Fix this by unregistering the RDS TCP sysctl table before calling rds_tcp_kill_sock(). unregister_net_sysctl_table() prevents new sysctl handlers from starting and waits for in-flight handlers to finish, so the listen socket can then be released safely. The fix was tested against the linked reproducer.9h CVE-2026-68289—

—

———In the Linux kernel, the following vulnerability has been resolved: tipc: fix integer overflow in tipc_recvmsg() and tipc_recvstream() In tipc_recvmsg(), the copy length is computed as: copy = min_t(int, dlen - offset, buflen); buflen is size_t but min_t(int, ...) casts it to int. When buflen exceeds INT_MAX (e.g. 0xFFFFFFFF via io_uring provided buffers), it wraps negative, wins the comparison, and the negative copy length propagates to simple_copy_to_iter() where int-to-size_t promotion makes it SIZE_MAX, triggering a WARN_ON. tipc_recvstream() has the same pattern. Kernel panic - not syncing: kernel: panic_on_warn set ... RIP: 0010:simple_copy_to_iter+0x9e/0xd0 (net/core/datagram.c:521) Call Trace: __skb_datagram_iter+0x123/0x8b0 (net/core/datagram.c:402) skb_copy_datagram_iter+0x77/0x1a0 (net/core/datagram.c:534) tipc_recvmsg+0x3d7/0xe80 (net/tipc/socket.c:1934) io_recvmsg+0x47e/0xda0 Fix by changing min_t(int, ...) to min_t(size_t, ...) in both functions. The result is always <= (dlen - offset), which is bounded by TIPC maximum message size (0x1ffff bytes), so the implicit narrowing on assignment to int copy is always safe.9h CVE-2026-68288—

—

———In the Linux kernel, the following vulnerability has been resolved: net: drop_monitor: fix info leak in NET_DM_ATTR_PAYLOAD net_dm_packet_report_fill() and net_dm_hw_packet_report_fill() open code the NET_DM_ATTR_PAYLOAD attribute to avoid zeroing the packet payload before overwriting it with skb_copy_bits(). skb_put() reserves nla_total_size(payload_len), i.e. the header plus the NLA_ALIGN() padding, but only payload_len bytes are copied in. When payload_len is not a multiple of 4 the 1-3 padding bytes are never initialized and are leaked to user space inside the netlink message. KMSAN confirms the leak for the software path when the packet payload length is not 4-byte aligned: BUG: KMSAN: kernel-infoleak in _copy_to_iter _copy_to_iter __skb_datagram_iter skb_copy_datagram_iter netlink_recvmsg sock_recvmsg __sys_recvfrom Uninit was created at: kmem_cache_alloc_node_noprof __alloc_skb net_dm_packet_work Bytes 173-175 of 176 are uninitialized Use __nla_reserve(), which sets up the attribute header and zeroes the padding, instead of open coding the attribute construction.9h