CVE Watch360,624 in full archive

Vulnerabilities exploitable today

360,624in current view

Single score combining CVSS, KEV membership and EPSS. Every CVE with its own record — timeline from publication to active exploitation.

In KEV catalog1,665

New KEV · 24H0

Exploit Today ≥ 701,608

Distribution · last window

Critical
2,501
High
11,081
Medium
7,068
Low
637

Filters

Window

Severity

Flags

Vulnerabilities360,001–360,040 · 360,624

CVECVSSEPSSKEVRExploitTitleMod.

CVE-2026-73634—

—

——0Uncontrolled resource consumption vulnerability in Apache Struts. An application that exposes an endpoint collecting Content Security Policy violation reports reads the submitted report into memory without bounding how much it will accept, so a single request can exhaust the heap and deny service to other users. Such endpoints are ordinarily reachable without authentication. The core distribution maps no such endpoint by default; applications that do not collect violation reports are not affected. This issue affects Apache Struts: from 6.0.0 through 6.10.0, from 7.0.0 through 7.2.1. Users are recommended to upgrade to version 6.11.0 or 7.3.0, which fixes the issue.9h CVE-2026-73635—

—

——0Allocation of resources without limits or throttling vulnerability in Apache Struts. When no fixed locale is configured, the locale used for localized-text lookups is taken from the incoming request, allowing an unauthenticated remote client to cause the framework's internal localized-text caches to grow without bound and exhaust the Java heap, denying service to other users. Applications that configure a fixed locale are not affected. This issue affects Apache Struts: from 2.0.0 through 2.3.37, from 2.5.0 through 2.5.33, from 6.0.0 through 6.10.0, from 7.0.0 through 7.2.1. Users are recommended to upgrade to version 6.11.0 or 7.3.0, which fixes the issue.9h CVE-2026-72278—

—

——0In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: nv: Re-translate VNCR before injecting abort KVM faults in the VNCR page with FOLL_WRITE whenever the guest aborts for a write, similar to how a regular stage-2 mapping is handled. It is entirely possible that the guest reads from the VNCR before writing to it, in which case the PFN could only be read-only. Invalidate the VNCR TLB and re-fetch the translation upon taking a VNCR abort, allowing the host mapping to be faulted in for write the second time around. Interestingly enough, this also satisfies the ordering requirements of FEAT_ETS2/3 between descriptor updates and MMU faults.14h CVE-2026-74364—

—

——0In the Linux kernel, the following vulnerability has been resolved: bpf: Reject exclusive maps as inner maps in map-in-map An exclusive map (created with excl_prog_hash) is bound to a single program by hash: check_map_prog_compatibility() refuses to load any program whose digest does not match map->excl_prog_sha. That check only runs for maps a program references directly, i.e. its used_maps. A map reached at runtime through a map-of-maps is never in used_maps, and bpf_map_meta_equal() does not consider excl_prog_sha, so an exclusive map can be inserted into a non-exclusive outer map and then looked up and mutated by an unrelated program, bypassing the exclusivity guarantee. For the signed loader this defeats the metadata map exclusivity check added in the signed loader: the cached map->sha[] is validated against the signed hash while another program on a hostile host rewrites the frozen map's contents through the outer map.14h CVE-2026-74430—

—

——0In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix ACKALL packet handling rxrpc_input_ackall() accepts ACKALL packets without checking whether the call is in a state that can legitimately have outstanding transmit buffers. A forged ACKALL can therefore reach a new service call in RXRPC_CALL_SERVER_RECV_REQUEST before any reply packets have been queued. In that state call->tx_top is zero and call->tx_queue is NULL, so rxrpc_rotate_tx_window() dereferences a NULL txqueue and triggers a null-pointer dereference. Fix the handling of ACKALL packets by the following means: (1) Add two new call states: RXRPC_CALL_CLIENT_PRE_SEND which indicates that the client call is connected, but nothing has been transmitted as yet; and RXRPC_CALL_CLIENT_AWAIT_ACK, which indicates that everything has been transmitted at least once, but we're now waiting for the stuff remaining in the Tx buffer to be ACK'd (retransmissions may still happen). The RXRPC_CALL_CLIENT_PRE_SEND state is set when the call is assigned a channel and transitions to RXRPC_CALL_CLIENT_SEND_REQUEST when the first packet is transmitted. RXRPC_CALL_CLIENT_AWAIT_REPLY is then narrowed in scope to indicate that all Tx packets have been ACK'd and we're now waiting for the reply to be received. (2) As per Wyatt Feng's original patch[1], the ACKALL handler then checks that the call state is one in which there might be stuff in the Tx buffer to ACK, but now this includes AWAIT_ACK rather than AWAIT_REPLY. ACKALL packets are ignored if received in the wrong state. Note that unlike Wyatt Feng's patch, it's no longer necessary to check to see if the Tx buffer exists as this the state set now covers this. (3) Make the ACKALL handler use call->tx_transmitted rather than call->tx_top as the former is explicitly the highest packet seq number transmitted, whereas the latter has a looser definition. Thanks to Jeffrey Altman for a description of the history of the ACKALL packet[1].14h CVE-2026-74259—

—

——0In the Linux kernel, the following vulnerability has been resolved: cifs: remove all cifs files before kill super Cifs files may be put into fileinfo_put_wq during umounting cifs. After umount done, cifsFileInfo_put_final is called, which cause following BUG: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... [ 134.222152] list_lru_add+0x64/0x1a0 [ 134.222399] ? cifs_put_tcon+0x171/0x340 [cifs] [ 134.222772] d_lru_add+0x44/0x60 [ 134.222997] dput+0x1fc/0x210 [ 134.223213] cifsFileInfo_put_final+0x11a/0x140 [cifs] [ 134.223576] process_one_work+0x17c/0x320 [ 134.223843] worker_thread+0x188/0x280 [ 134.224084] ? __pfx_worker_thread+0x10/0x10 [ 134.224366] kthread+0xcc/0x100 [ 134.224576] ? __pfx_kthread+0x10/0x10 [ 134.224827] ret_from_fork+0x30/0x50 [ 134.225063] ? __pfx_kthread+0x10/0x10 [ 134.225328] ret_from_fork_asm+0x1b/0x30 This can be reproduce by following: unshare -n bash -c " mkdir -p ${CIFS_MNT} ip netns attach root 1 ip link add eth0 type veth peer veth0 netns root ip link set eth0 up ip -n root link set veth0 up ip addr add 192.168.0.2/24 dev eth0 ip -n root addr add 192.168.0.1/24 dev veth0 ip route add default via 192.168.0.1 dev eth0 ip netns exec root sysctl net.ipv4.ip_forward=1 ip netns exec root iptables -t nat -A POSTROUTING -s 192.168.0.2 -o ${DEV} -j MASQUERADE mount -t cifs ${CIFS_PATH} ${CIFS_MNT} -o vers=3.0,sec=ntlmssp,credentials=${CIFS_CRED},rsize=65536,wsize=65536,cache=none,echo_interval=1 touch ${CIFS_MNT}/a.txt ip netns exec root iptables -t nat -D POSTROUTING -s 192.168.0.2 -o ${DEV} -j MASQUERADE " umount ${CIFS_MNT}14h CVE-2026-72412—

—

——0In the Linux kernel, the following vulnerability has been resolved: s390/mm: Fix handling of _PAGE_UNUSED pte bit The _PAGE_UNUSED softbit should not really be lying around. Its sole purpose is to signal to try_to_unmap_one() and try_to_migrate_one() that the page can be discarded instead of being moved / swapped. KVM has no way to know why a page is being unmapped, so it sets the bit on userspace ptes corresponding to unused guest pages every time they get unmapped. KVM has no reasonable way to clear the bit once the page is in use again. While set_ptes() checks and clears the bit, other paths that set new ptes did not. This led to used pages being thrown out as if they were unused, causing guest corruption. Fix the issue by clearing the _PAGE_UNUSED bit for present ptes in set_pte(), i.e. whenever a present pte is getting set. The check in set_ptes() is then redundant and can be removed. Also fix gmap_helper_try_set_pte_unused() to only set the bit if the pte is present; the _PAGE_UNUSED bit is only defined for present ptes and thus should not be set for non-present ptes.14h CVE-2026-72413—

—

——0In the Linux kernel, the following vulnerability has been resolved: sctp: fix err_chunk memory leaks in INIT handling When sctp_verify_init() encounters unrecognized parameters, it allocates an err_chunk to report them. However, this chunk is leaked in several code paths: 1. In sctp_sf_do_5_1B_init(), if security_sctp_assoc_request() fails after sctp_verify_init() has populated err_chunk, the function returns immediately without freeing it. 2. In sctp_sf_do_unexpected_init(), the same leak occurs on the security_sctp_assoc_request() failure path. 3. In sctp_sf_do_unexpected_init(), on the success path after copying unrecognized parameters to the INIT-ACK, the function returns without freeing err_chunk, unlike sctp_sf_do_5_1B_init() which properly frees it. Fix all three leaks by adding sctp_chunk_free(err_chunk) calls before returning in the error paths and on the success path in sctp_sf_do_unexpected_init().14h CVE-2026-72414—

—

——0In the Linux kernel, the following vulnerability has been resolved: net: dsa: sja1105: round up PTP perout pin duration pin_duration is converted from the user-provided period to SJA1105 clock ticks and is later passed as the cycle_time argument to future_base_time(). Very small period values may become zero after the conversion, which can lead to a division by zero in future_base_time(). Round zero pin_duration up to 1 tick so that the smallest unsupported periods use the minimum non-zero hardware duration instead of passing zero to future_base_time().14h CVE-2026-74258—

—

——0In the Linux kernel, the following vulnerability has been resolved: bpf: Guard __get_user acesss with access_ok for uprobe_multi data As reported by sashiko [1] we need to use access_ok to check the user space data bounds before we use __get-user to get it. [1] https://lore.kernel.org/bpf/20260610145235.CB1441F00893@smtp.kernel.org/14h CVE-2026-74257—

—

——0In the Linux kernel, the following vulnerability has been resolved: sockmap: Fix use-after-free in udp_bpf_recvmsg() syzbot reported use-after-free of struct sk_msg in sk_msg_recvmsg(). [0] sk_msg_recvmsg() peeks sk_msg from psock->ingress_msg under a lock, but its processing is lockless. Thus, sk_msg_recvmsg() must be serialised by callers, otherwise multiple threads could touch the same sk_msg. For example, TCP uses lock_sock(), and AF_UNIX uses unix_sk(sk)->iolock. Initially, udp_bpf_recvmsg() had used lock_sock(), but the cited commit removed it. Let's serialise sk_msg_recvmsg() with lock_sock() in udp_bpf_recvmsg(). Note that holding spin_lock_bh(&sk->sk_receive_queue.lock) is not an option due to copy_page_to_iter() in sk_msg_recvmsg(). [0]: BUG: KASAN: slab-use-after-free in sk_msg_recvmsg+0xb54/0xc30 net/core/skmsg.c:428 Read of size 4 at addr ffff88814cdcf000 by task syz.0.24/6020 CPU: 1 UID: 0 PID: 6020 Comm: syz.0.24 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 01/13/2026 Call Trace: <TASK> dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xba/0x230 mm/kasan/report.c:482 kasan_report+0x117/0x150 mm/kasan/report.c:595 sk_msg_recvmsg+0xb54/0xc30 net/core/skmsg.c:428 udp_bpf_recvmsg+0x4bd/0xe00 net/ipv4/udp_bpf.c:84 inet_recvmsg+0x260/0x270 net/ipv4/af_inet.c:891 sock_recvmsg_nosec net/socket.c:1078 [inline] sock_recvmsg+0x1a8/0x270 net/socket.c:1100 ____sys_recvmsg+0x1e6/0x4a0 net/socket.c:2812 ___sys_recvmsg+0x215/0x590 net/socket.c:2854 do_recvmmsg+0x334/0x800 net/socket.c:2949 __sys_recvmmsg net/socket.c:3023 [inline] __do_sys_recvmmsg net/socket.c:3046 [inline] __se_sys_recvmmsg net/socket.c:3039 [inline] __x64_sys_recvmmsg+0x198/0x250 net/socket.c:3039 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xe2/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fb319f9aeb9 Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb31ad97028 EFLAGS: 00000246 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 00007fb31a216090 RCX: 00007fb319f9aeb9 RDX: 0000000000000001 RSI: 0000200000000400 RDI: 0000000000000004 RBP: 00007fb31a008c1f R08: 0000000000000000 R09: 0000000000000000 R10: 0000000040000021 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fb31a216128 R14: 00007fb31a216090 R15: 00007ffe21dd0a98 </TASK> Allocated by task 6019: kasan_save_stack mm/kasan/common.c:57 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:78 poison_kmalloc_redzone mm/kasan/common.c:398 [inline] __kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:415 kasan_kmalloc include/linux/kasan.h:263 [inline] __kmalloc_cache_noprof+0x3d1/0x6e0 mm/slub.c:5780 kmalloc_noprof include/linux/slab.h:957 [inline] kzalloc_noprof include/linux/slab.h:1094 [inline] alloc_sk_msg net/core/skmsg.c:510 [inline] sk_psock_skb_ingress_self+0x60/0x350 net/core/skmsg.c:612 sk_psock_verdict_apply net/core/skmsg.c:1038 [inline] sk_psock_verdict_recv+0x7d9/0x8d0 net/core/skmsg.c:1236 udp_read_skb+0x73e/0x7e0 net/ipv4/udp.c:2045 sk_psock_verdict_data_ready+0x12d/0x550 net/core/skmsg.c:1257 __udp_enqueue_schedule_skb+0xc54/0x10b0 net/ipv4/udp.c:1789 __udp_queue_rcv_skb net/ipv4/udp.c:2346 [inline] udp_queue_rcv_one_skb+0xac5/0x19c0 net/ipv4/udp.c:2475 __udp4_lib_mcast_deliver+0xc06/0xcf0 net/ipv4/udp.c:2585 __udp4_lib_rcv+0x10f6/0x2620 net/ipv4/udp.c:2724 ip_protocol_deliver_rcu+0x282/0x440 net/ipv4/ip_input.c:207 ip_local_deliver_finish+0x3bb/0x6f0 net/ipv4/ip_input.c:241 NF_HOOK+0x336/0x3c0 include/linux/netfilter.h:318 dst_input include/net/dst.h:474 [inline] ip_sublist_rcv_finish+0x221/0x2a0 net/ipv4/ip_input.c:584 ip_list_rcv_finish net/ipv4/ip_inp ---truncated---14h CVE-2026-74256—

—

——0In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: fix integer overflow in bpf_msg_pop_data() bounds check start and len are u32, so u64 last = start + len; evaluates start + len in 32-bit and wraps before storing it in last. The bounds check if (start >= offset + l || last > msg->sg.size) return -EINVAL; can then be passed with an out-of-range start/len, after which the pop loop runs off the end of the scatterlist and sk_msg_shift_left() calls put_page() on the empty msg->sg.end slot: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] RIP: 0010:sk_msg_shift_left net/core/filter.c:2957 [inline] RIP: 0010:____bpf_msg_pop_data net/core/filter.c:3103 [inline] RIP: 0010:bpf_msg_pop_data+0x753/0x1a10 net/core/filter.c:2984 Call Trace: <TASK> bpf_prog_4cc92c278f4d5d56+0x1b1/0x1e8 bpf_prog_run_pin_on_cpu+0x107/0x320 include/linux/filter.h:746 sk_psock_msg_verdict+0x357/0x7f0 net/core/skmsg.c:934 tcp_bpf_send_verdict net/ipv4/tcp_bpf.c:420 [inline] tcp_bpf_sendmsg+0x766/0x1ae0 net/ipv4/tcp_bpf.c:583 __sock_sendmsg+0x153/0x1c0 net/socket.c:802 __sys_sendto+0x326/0x430 net/socket.c:2265 __x64_sys_sendto+0xe3/0x100 net/socket.c:2268 do_syscall_64+0x14c/0x480 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Widen the addition with a (u64) cast so the bound is evaluated in 64-bit and a len near U32_MAX no longer wraps below msg->sg.size. While here, change pop from int to u32. It counts bytes against the unsigned scatterlist lengths and can never be negative, so the signed type only invites sign-confusion in the pop loop.14h CVE-2026-72415—

—

——0In the Linux kernel, the following vulnerability has been resolved: ASoC: SDCA: Validate written enum value in ge_put_enum_double() ge_put_enum_double() passes the user-supplied enumeration index item[0] to snd_soc_enum_item_to_val() without checking it against the number of items in the enum: ret = snd_soc_enum_item_to_val(e, item[0]); snd_soc_enum_item_to_val() indexes the heap-allocated e->values[] array with that index (e->values is set from a devm_kcalloc() of e->items entries), so a control write with an out-of-range item[0] reads past the end of the values buffer. The bounds check in snd_soc_dapm_put_enum_double() only runs afterwards, so it does not prevent the read here. Reject an out-of-range item before using it, matching the other enum put handlers. This issue was pointed out by the Sashiko AI review bot while reviewing a related enum-validation series: https://lore.kernel.org/all/20260609125735.CEB651F00893@smtp.kernel.org/14h CVE-2026-72416—

—

——0In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_compat: ebtables emulation must reject non-bridge targets xtables targets return netfilter verdicts: NF_ACCEPT, NF_DROP, and so on. ebtables targets return incompatible verdicts: EBT_ACCEPT, EBT_DROP, ... We cannot allow fallback to NFPROTO_UNSPEC. ebtables doesn't permit this since 11ff7288beb2 ("netfilter: ebtables: reject non-bridge targets") but that commit missed the nft_compat layer.14h CVE-2026-72417—

—

——0In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: Validate iph->ihl in nf_flow_ip4_tunnel_proto() Add sanity check for iph->ihl field in nf_flow_ip4_tunnel_proto() before using it to compute the header size, avoiding out-of-bounds access with malformed IP headers. While at it, use iph->protocol instead of the hardcoded IPPROTO_IPIP constant when setting ctx->tun.proto and reference ctx->tun.hdr_size when updating ctx->offset.14h CVE-2026-74255—

—

——0In the Linux kernel, the following vulnerability has been resolved: tipc: fix UAF in tipc_l2_send_msg() Syzbot reported a slab-use-after-free in ipvlan_hard_header() when called from tipc_l2_send_msg(). The root cause is that tipc_disable_l2_media() calls synchronize_net() while b->media_ptr is still valid. This allows concurrent RCU readers to obtain the device pointer after synchronize_net() has finished. The pointer is cleared later in bearer_disable(), but without any subsequent synchronization, allowing the device to be freed while still in use by readers. Fix this by clearing b->media_ptr in tipc_disable_l2_media() before calling synchronize_net(). This is safe to do now because the call order in bearer_disable() was reversed in 0d051bf93c06 ("tipc: make bearer packet filtering generic") to call tipc_node_delete_links() (which needs the pointer) before disable_media(). https: //lore.kernel.org/netdev/6a2c1007.428ffe26.258b27.015d.GAE@google.com/T/#u14h CVE-2026-72502—

—

——0In the Linux kernel, the following vulnerability has been resolved: tcp: ipv6: clamp default adverting MSS to avoid GSO_BY_FRAGS (0xFFFF) When MTU is large, ip6_default_advmss() can return IPV6_MAXPLEN (65535). This is interpreted by TCP as mss_clamp, allowing the MSS to reach 65535. However, 0xFFFF is also used as a magic value GSO_BY_FRAGS in the kernel. If a TCP packet with gso_size=0xFFFF is passed to skb_segment(), it will be mistakenly treated as GSO_BY_FRAGS, leading to a NULL pointer dereference because local TCP packets do not use frag_list. Fix this by returning min(IPV6_MAXPLEN, GSO_BY_FRAGS - 1) (65534) from ip6_default_advmss() when MTU is large. Also update the stale comment in ip6_default_advmss() which suggested that IPV6_MAXPLEN is returned to mean "any MSS".14h CVE-2026-74382—

—

——0In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_bpf: prevent unbounded recursion in offload rollback Quan Sun reported [1] a stack overflow in cls_bpf_offload_cmd(). Reproducer on netdevsim: add a skip_sw cls_bpf filter, set the bpf_tc_accept debugfs knob to 0, then `tc filter replace`. The replace calls tc_setup_cb_replace() which fails. cls_bpf_offload_cmd() then swaps prog/oldprog and recursively calls itself to roll back. But bpf_tc_accept=0 makes the rollback fail too, which triggers yet another rollback frame with the same arguments, and so on until the stack is exhausted. bpf_tc_accept is just a convenient knob for the reproducer. Any driver whose tc_setup_cb_replace() fails twice in a row can hit the same loop, so this is not a netdevsim-only issue. Two ways to fix it: 1) Have the rollback call tc_setup_cb_add() on oldprog instead of re-entering cls_bpf_offload_cmd(). 2) Mark the rollback frame with a flag and skip a second-level rollback from inside it. Go with (2). It is the smaller change and keeps the original behaviour: the rollback still goes through tc_setup_cb_replace(), so the driver gets one real chance to restore its state. If that attempt also fails, we just return the original error instead of recursing. [1]: https://lore.kernel.org/bpf/ce5a6005-3c5e-4696-9e05-eba9461dc860@std.uestc.edu.cn/T/#u14h CVE-2026-74429—

—

——0In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix the reception of a reply packet before data transmission Fix rxrpc_receiving_reply() to handle the reception of an apparent reply DATA packet before rxrpc has had a chance to send any request DATA packets on a client call by checking to see if the call has been exposed yet by sending the first packet. Without this, rxrpc_rotate_tx_window() might oops. Also fix rxrpc_rotate_tx_window() to handle the Tx queue being empty by changing the do...while loop into a while loop, just in case a call is abnormally terminated by an early reply before the last request packet is transmitted.14h CVE-2026-74380—

—

——0In the Linux kernel, the following vulnerability has been resolved: gpu: host1x: Fix iommu_map_sgtable() return value check Commit "iommu: return full error code from iommu_map_sg[_atomic]()" changed iommu_map_sgtable() to return an ssize_t and negative values in error cases, rather than a size_t and a zero. pin_job() also was incorrectly assigning to 'int', which could cause overflows into negative values. Update pin_job() to correctly check for errors from iommu_map_sgtable.14h CVE-2026-72501—

—

——0In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Initialize dpi variable to zero dpi is initialized only for BNXT_RE_ALLOC_WC_PAGE, but copied for all the cases. So initialize the dpi to 0.14h CVE-2026-72500—

—

——0In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Free SRQ toggle page after firmware teardown Free the toggle page only after firmware teardown completes so that an NQ interrupt arriving during bnxt_qplib_destroy_srq() won't write the toggle values to an already-freed page. Move free_page() after bnxt_qplib_destroy_srq().14h CVE-2026-72499—

—

——0In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Free CQ toggle page after firmware teardown Free the toggle page only after firmware teardown completes so that an NQ interrupt arriving during bnxt_qplib_destroy_cq() won't write the toggle value to an already-freed page. Move free_page() after bnxt_qplib_destroy_cq.14h CVE-2026-72277—

—

——0In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: nv: Inject SEA if guest VNCR isn't normal memory When constructing an L1 VNCR mapping, KVM unconditionally uses cacheable memory attributes, even if the underlying PFN isn't memory. This gets particularly hairy if the endpoint doesn't support cacheable memory attributes, potentially throwing an SError on writeback... While KVM does permit cacheable memory attributes on certain PFNMAP VMAs, kvm_translate_vncr() isn't currently grabbing the VMA. So do the simpler thing for now and just reject everything that isn't memory.14h CVE-2026-74428—

—

——0In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix double unlock in rxrpc_recvmsg() Fix a double unlock in rxrpc_recvmsg() when dealing with OOB messages.14h CVE-2026-72418—

—

——0In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conncount: prevent connlimit drops for early confirmed ct Commit 69894e5b4c5e ("netfilter: nft_connlimit: update the count if add was skipped") introduced a regression where packets for valid connections are dropped when using connlimit for soft-limiting scenarios. The issue occurs when a new connection reuses a socket currently in the TIME_WAIT state. In this scenario, the connection tracking entry is evaluated as already confirmed. Previously, __nf_conncount_add() assumed that if a connection was confirmed and did not originate from the loopback interface, it should skip the addition and return -EEXIST. Skipping the addition triggers a garbage collection run that cleans up the TIME_WAIT connection. Consequently, the active connection count drops to 0, which xt_connlimit mishandles, leading to the false rejection of the perfectly valid new connection. Fix this by replacing the interface check with protocol-agnostic state checks. We now skip the tree insertion and preserve the lockless garbage collection optimization only if the connection is IPS_ASSURED. This allows early-confirmed setup packets (such as reused TIME_WAIT sockets or locally generated SYN-ACKs) to be properly evaluated and counted without falsely dropping. The goto check_connections path is maintained to ensure these setup packets are deduplicated correctly. This has been tested with slowhttptest and HTTP server configured locally to ensure we are not breaking soft-limiting scenarios for local or external connections. In addition, it was tested with a OVS zone limit too.14h CVE-2026-72419—

—

——0In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_nat: avoid invalid nat_net pointer use on failed nf_nat_init() We ran into below KASAN splat, which is mostly uninteresting, beside for having nf_nat_register_fn() in the call chain as a cause for the offending access: ================================================================== BUG: KASAN: slab-out-of-bounds in nf_nat_register_fn+0x5f9/0x640 Read of size 8 at addr ffff890031e54c20 by task iptables/9510 CPU: 0 UID: 0 PID: 9510 Comm: iptables Not tainted 6.18.18-grsec-full-20260320181326 #1 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> […] dump_stack_lvl+0xee/0x160 ffff88004117eeb8 […] print_report+0x6e/0x640 ffff88004117eee0 […] ? __phys_addr+0x8e/0x140 ffff88004117eef0 […] ? kasan_addr_to_slab+0x51/0xe0 ffff88004117ef08 […] ? complete_report_info+0xec/0x1c0 ffff88004117ef20 […] ? nf_nat_register_fn+0x5f9/0x640 ffff88004117ef48 […] kasan_report+0xbc/0x140 ffff88004117ef50 […] ? nf_nat_register_fn+0x5f9/0x640 ffff88004117ef90 […] nf_nat_register_fn+0x5f9/0x640 ffff88004117eff8 […] ? nf_nat_icmp_reply_translation+0x6e0/0x6e0 ffff88004117f070 […] nf_tables_register_hook.part.0+0xa0/0x220 ffff88004117f080 […] nf_tables_addchain.constprop.0+0x1054/0x1fc0 ffff88004117f0b8 […] ? nft_chain_lookup.part.0+0x4ce/0xac0 ffff88004117f130 […] ? nf_tables_abort+0x3d80/0x3d80 ffff88004117f190 […] ? nf_tables_dumpreset_obj+0x100/0x100 ffff88004117f1c8 […] ? nft_table_lookup.part.0+0x255/0x300 ffff88004117f310 […] ? nf_tables_newchain+0x21a4/0x2fa0 ffff88004117f358 […] nf_tables_newchain+0x21a4/0x2fa0 ffff88004117f360 […] ? nf_tables_addchain.constprop.0+0x1fc0/0x1fc0 ffff88004117f458 […] ? nla_get_range_signed+0x4a0/0x4a0 ffff88004117f488 […] ? lock_acquire+0x16f/0x320 ffff88004117f490 […] ? find_held_lock+0x3b/0xe0 ffff88004117f4b0 […] ? __nla_parse+0x45/0x80 ffff88004117f500 […] nfnetlink_rcv_batch+0xbca/0x19a0 ffff88004117f550 […] ? nfnetlink_net_exit_batch+0x120/0x120 ffff88004117f618 […] ? __sanitizer_cov_trace_switch+0x63/0xe0 ffff88004117f720 […] ? gr_acl_handle_mmap+0x1c4/0x320 ffff88004117f7c0 […] ? nla_get_range_signed+0x4a0/0x4a0 ffff88004117f7e8 […] ? gr_is_capable+0x6f/0xe0 ffff88004117f830 […] ? __nla_parse+0x45/0x80 ffff88004117f860 […] ? skb_pull+0x103/0x1a0 ffff88004117f880 […] nfnetlink_rcv+0x3db/0x4a0 ffff88004117f8b0 […] ? nfnetlink_rcv_batch+0x19a0/0x19a0 ffff88004117f8d8 […] ? netlink_lookup+0xe2/0x240 ffff88004117f900 […] netlink_unicast+0x74b/0xb00 ffff88004117f930 […] ? netlink_attachskb+0xb20/0xb20 ffff88004117f980 […] ? __check_object_size+0x3e/0xaa0 ffff88004117f998 […] ? security_netlink_send+0x51/0x160 ffff88004117f9c8 […] netlink_sendmsg+0xa03/0x1200 ffff88004117f9f8 […] ? netlink_unicast+0xb00/0xb00 ffff88004117fa70 […] ? netlink_unicast+0xb00/0xb00 ffff88004117fac8 […] ? ____sys_sendmsg+0xe2a/0x1040 ffff88004117faf8 […] ____sys_sendmsg+0xe2a/0x1040 ffff88004117fb00 […] ? kernel_recvmsg+0x300/0x300 ffff88004117fb60 […] ? reacquire_held_locks+0xe9/0x260 ffff88004117fbc8 […] ___sys_sendmsg+0x138/0x200 ffff88004117fbf8 […] ? do_recvmmsg+0x7e0/0x7e0 ffff88004117fc30 […] ? lockdep_hardirqs_on_prepare+0x101/0x1e0 ffff88004117fc50 […] ? lock_acquire+0x16f/0x320 ffff88004117fd20 […] ? lock_acquire+0x16f/0x320 ffff88004117fd58 […] ? find_held_lock+0x3b/0xe0 ffff88004117fd70 […] __sys_sendmsg+0x17a/0x260 ffff88004117fdc8 […] ? __sys_sendmsg_sock+0x80/0x80 ffff88004117fdf0 […] ? syscall_trace_enter+0x15e/0x2c0 ffff88004117fe98 […] do_syscall_64+0x7d/0x400 ffff88004117fec8 […] entry_SYSCALL_64_safe_stack+0x4a/0x60 ffff88004117fef8 </TASK> ================================================================== The out-of-bounds report, though, is a red herring as it is f ---truncated---14h CVE-2026-72498—

—

——0In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Avoid displaying the kernel pointer While dumping the info on MR using the rdma tool, we dump the mr_hwq which is a kernel pointer. There is no need to expose this value for end user. So avoid it.14h CVE-2026-72497—

—

——0In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Add a max slot check for SQ The variable WQE mode must be validated against the maximum slots supported by HW. The max supported value is 64K. Adding a max and min check and fail if user supplied value is more than the max supported and zero.14h CVE-2026-72496—

—

——0In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Proper rollback if the ioremap fails bnxt_qplib_alloc_dpi returns success even if ioremap fails. Add the proper rollback when the ioremap fails and return -ENOMEM status.14h CVE-2026-72495—

—

——0In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Avoid repeated requests to allocate WC pages Applications can request multiple WC pages for the same ucontext. As of now, only 1 WC page per ucontext is supported. Add a lock to avoid concurrent access and a check to fail repeated requests. Also, if the mmap entry insert fails for the WC, free the Doorbell page index mapped for the WC page.14h CVE-2026-72494—

—

——0In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Replace waitqueue and flag with completion The driver previously used a waitqueue along with an explicit request_done flag, but without proper barriers around request_done. An earlier patch by Gui-Dong Han <hanguidong02@gmail.com> attempted to fix this by adding the missing memory barriers. Rather than adding the barriers, this patch replaces the waitqueue+flag with a completion, which is designed for this exact purpose.14h CVE-2026-74365—

—

——0In the Linux kernel, the following vulnerability has been resolved: nvdimm/btt: Handle preemption in BTT lane acquisition BTT lanes serialize access to per-lane metadata and workspace state during BTT I/O. The btt-check unit test reports data mismatches during BTT writes due to a race in lane acquisition that can lead to silent data corruption. The existing lane model uses a spinlock together with a per-CPU recursion count. That recursion model stopped being valid after BTT lanes became preemptible: another task can run on the same CPU, observe a non-zero recursion count, bypass locking, and use the same lane concurrently. BTT lanes are also held across arena_write_bytes() calls. That path reaches nsio_rw_bytes(), which flushes writes with nvdimm_flush(). Some provider flush callbacks can sleep, making a spinlock the wrong primitive for the lane lifetime. Replace the spinlock-based recursion model with a dynamically allocated per-lane mutex array and take the lane lock unconditionally. Add might_sleep() to catch any future atomic-context caller. Found with the ndctl unit test btt-check.sh.14h CVE-2026-72493—

—

——0In the Linux kernel, the following vulnerability has been resolved: net: serialize netif_running() check in enqueue_to_backlog() Syzbot reported a KASAN slab-use-after-free in fib_rules_lookup(). The root cause is a race condition where packets can escape the backlog flushing during device unregistration (e.g., during netns exit). Commit e9e4dd3267d0 ("net: do not process device backlog during unregistration") introduced a lockless netif_running() check in enqueue_to_backlog() to prevent queuing packets to an unregistering device. However, this creates a TOCTOU race window. A lockless transmitter (like veth_xmit) can pass the check before dev_close() clears IFF_UP. If the transmitter is then delayed, flush_all_backlogs() can run and finish before the transmitter grabs the backlog lock and queues the packet. The packet then escapes the flush and triggers UAF later when processed. Fix this by moving the netif_running() check inside the backlog lock. This serializes the check with the flush work (which also grabs the lock). We then either queue the packet before the flush runs (so it gets flushed), or check netif_running() after the flush/close completes (so it gets dropped).14h CVE-2026-72420—

—

——0In the Linux kernel, the following vulnerability has been resolved: md/raid5: avoid R5_Overlap races while breaking stripe batches KCSAN report a race in break_stripe_batch_list() vs. raid5_make_request() on sh->dev[i].flags (plain word write vs. atomic bit op).. and .. one possible scenario is: CPU1 CPU2 break_stripe_batch_list(sh1) -> handle sh2 -> lock(sh2) -> sh2->batch_head = NULL -> unlock(sh2) -> test_and_clear_bit(R5_Overlap, sh2->dev[i].flags) -> wake_up_bit(sh2->dev[i].flags) raid5_make_request() -> add_all_stripe_bios(sh2) -> lock(sh2) -> stripe_bio_overlaps(sh2) returns true batch_head is NULL, so new bio overlap exist bio on sh2 -> true -> set_bit(R5_Overlap, sh2->dev[i].flags) -> unlock(sh2) -> wait_on_bit(sh2->dev[i].flags) -> sh2->dev[i].flags = sh1->dev[i].flags & ~R5_Overlap No wait_up_bit(), CPU2 could be wait_on_bit() forever... Fix by : - Expand the protect zone. - Use batch_head's device flag's snaphot when no held head_sh->stripe_lock. - Move sh/head_sh->batch_head = NULL to the end of protected zone , and , any concurrent add_all_stripe_bios() grabs sh->stripe_lock now either: - see batch_head != null, and , is rejected by stripe_bio_overlaps() under the lock (no R5_Overlap wait ) , or , - sees batch_head == NULL, only after dev[i].flags has already been set and the prior R5_Overlap waiters worken. KCSAN report: ================================================ BUG: KCSAN: data-race in break_stripe_batch_list / raid5_make_request write (marked) to 0xffff8e89c8117548 of 8 bytes by task 4042 on cpu 0: raid5_make_request+0xea0/0x2930 md_handle_request+0x4a2/0xa40 md_submit_bio+0x109/0x1a0 __submit_bio+0x2ec/0x390 submit_bio_noacct_nocheck+0x457/0x710 submit_bio_noacct+0x2a7/0xc20 submit_bio+0x56/0x250 blkdev_direct_IO+0x54c/0xda0 blkdev_write_iter+0x38f/0x570 aio_write+0x22b/0x490 io_submit_one+0xa51/0xf70 __x64_sys_io_submit+0xf7/0x220 x64_sys_call+0x1907/0x1c60 do_syscall_64+0x130/0x570 entry_SYSCALL_64_after_hwframe+0x76/0x7e read to 0xffff8e89c8117548 of 8 bytes by task 4010 on cpu 5: break_stripe_batch_list+0x249/0x480 handle_stripe_clean_event+0x720/0x9b0 handle_stripe+0x32fb/0x4500 handle_active_stripes.isra.0+0x6e0/0xa50 raid5d+0x7e0/0xba0 md_thread+0x15a/0x2d0 kthread+0x1e3/0x220 ret_from_fork+0x37a/0x410 ret_from_fork_asm+0x1a/0x30 value changed: 0x0000000000000019 -> 0x0000000000000099 --> R5_Overlap14h CVE-2026-72421—

—

——0In the Linux kernel, the following vulnerability has been resolved: ipv4: fib: Don't ignore error route in local/main tables. When CONFIG_IP_MULTIPLE_TABLES is enabled but no rule is added, fib_lookup() performs route lookup directly on two tables. Since the first lookup does not properly bail out, the result of an error route in the merged local/main table could be overwritten by another route in the default table: # unshare -n # ip link set lo up # ip route add 192.168.0.0/24 dev lo table 253 # ip route add unreachable 192.168.0.0/24 # ip route get 192.168.0.1 192.168.0.1 dev lo table default uid 0 cache <local> Once a random rule is added, the error route is respected: # ip rule add table 0 # ip rule del table 0 # ip route get 192.168.0.1 RTNETLINK answers: No route to host Let's fix the inconsistent behaviour.14h CVE-2026-74407—

—

——0In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: cancel SSR work items during PCI shutdown A reboot can crash the kernel if it overlaps with WLAN firmware crash recovery (SSR). The crash is a NULL pointer dereference in the MHI teardown path while freeing DMA-backed MHI contexts. Simplified trace: dma_free_attrs mhi_deinit_dev_ctxt [mhi] ath11k_pci_power_down [ath11k_pci] ath11k_pci_shutdown [ath11k_pci] device_shutdown kernel_restart On the host side, SSR is driven by the MHI RDDM callback, which queues reset_work to perform device recovery. reset_work power-cycles the device by calling ath11k_hif_power_down() followed by ath11k_hif_power_up(). The power-down phase deinitializes MHI and frees DMA resources. Shutdown/reboot runs fully asynchronously with this RDDM-driven SSR recovery flow. As a result, the shutdown path (ath11k_pci_shutdown() -> ath11k_pci_power_down()) can race with the SSR recovery sequence. Fix this by canceling SSR-related work items during PCI shutdown, marking the device as unregistering, and serializing the RDDM callback path that checks and queues reset_work. This ensures that no new SSR recovery work can be queued once teardown has started, and that any in-flight recovery work is fully synchronized before device power-down, preventing MHI teardown and DMA resource freeing from running more than once. Note: This issue only affects PCI/MHI-based devices. AHB-based ath11k devices do not queue reset_work in normal SSR flows. Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04866.5-QCAHSPSWPL_V1_V2_SILICONZ_IOE-114h CVE-2026-72321—

—

——0In the Linux kernel, the following vulnerability has been resolved: ipv4: igmp: Fix potential memory leaks in igmp_mod_timer() and igmp_stop_timer() When a timer is deleted and not re-armed in igmp_mod_timer(), or stopped in igmp_stop_timer(), the code currently decrements the reference counter of the multicast list entry @im using refcount_dec(&im->refcnt). However, both functions can be called from the RCU reader path: - igmp_mod_timer() via igmp_heard_query() -> for_each_pmc_rcu() - igmp_stop_timer() via igmp_rcv() -> igmp_heard_report() If the group im was concurrently removed from the list by ip_mc_dec_group(), its reference count might have already been decremented to 1. In this case, timer_delete() succeeds, and refcount_dec() decrements the refcount from 1 to 0. Since refcount_dec() does not free the object when it hits 0 (unlike ip_ma_put()), the im structure is leaked. Fix this by using ip_ma_put(im) instead of refcount_dec(&im->refcnt), and deferring the put until after the spinlock is released.14h CVE-2026-74408—

—

——0In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: fix OOB access from firmware tx status queue ID ath_tx_edma_tasklet() accesses sc->tx.txq[ts.qid] where ts.qid is a 4-bit hardware field (0-15), but the txq array only has ATH9K_NUM_TX_QUEUES (10) entries. A qid >= 10 causes an OOB array access. Add a bounds check on ts.qid before using it as an array index.14h CVE-2026-74366—

—

——0In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix NULL deref in change_sta_links for unready link _ieee80211_set_active_links() calls _ieee80211_link_use_channel() for each newly-added link and WARN_ON_ONCE()s if it fails. The call uses assign_on_failure=true, which allows mac80211 to continue despite driver failures, but when a mac80211-level channel validation fails (e.g., combinations check, DFS, or no available radio), drv_assign_vif_chanctx() is never reached. Since ath12k_mac_vdev_create() is only called from that path, arvif->is_created remains false and arvif->ar remains NULL for the failed link. The subsequent drv_change_sta_links() call reaches ath12k_mac_op_change_sta_links(), which allocates an arsta and sets ahsta->links_map |= BIT(link_id) for the broken link before checking whether the link is ready. When the vdev was never created, only station_add() is skipped, but the link remains in links_map. Any subsequent operation iterating links_map and dereferencing arvif->ar without a NULL check will crash. Two observed examples are NULL deref in ath12k_mac_ml_station_remove() on disconnect and in ath12k_mac_op_set_key() when wpa_supplicant installs PTK keys. BUG: Unable to handle kernel NULL pointer dereference at 0x00000000 pc : ath12k_mac_station_post_remove+0x40/0xe8 [ath12k] Call trace: ath12k_mac_station_post_remove+0x40/0xe8 [ath12k] ath12k_mac_op_sta_state+0xb60/0x1720 [ath12k] drv_sta_state+0x100/0xbd8 [mac80211] __sta_info_destroy_part2+0x148/0x178 [mac80211] ieee80211_set_disassoc+0x500/0x678 [mac80211] BUG: Unable to handle kernel NULL pointer dereference at 0x00000000 pc : ath12k_mac_op_set_key+0x1f8/0x2c0 [ath12k] Call trace: ath12k_mac_op_set_key+0x1f8/0x2c0 [ath12k] drv_set_key+0x70/0x100 [mac80211] ieee80211_key_enable_hw_accel+0x78/0x260 [mac80211] ieee80211_add_key+0x16c/0x2ac [mac80211] nl80211_new_key+0x138/0x280 [cfg80211] Fix this by checking arvif->is_created before calling ath12k_mac_alloc_assign_link_sta(). This prevents the broken link from entering links_map, so all subsequent operations iterating the bitmap are protected. The reliability of arvif->is_created across all error paths is ensured by the preceding patch. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.314h