Vulnerabilities exploitable today
369,139in current view
Single score combining CVSS, KEV membership and EPSS. Every CVE with its own record — timeline from publication to active exploitation.
In KEV catalog1,694
New KEV · 24H0
Exploit Today ≥ 701,634
Distribution · last window
- Critical2,182
- High7,845
- Medium5,728
- Low553
Window
Severity
Flags
CVECVSSEPSSKEVRExploitTitleMod.
CVE-2026-80845——
———In the Linux kernel, the following vulnerability has been resolved:
xfrm: avoid lock inversion in nat keepalive work
nat_keepalive_work() walks the state table while xfrm_state_walk()
holds net->xfrm.xfrm_state_lock. Its callback then acquires x->lock,
which conflicts with the delete path taking the same locks in reverse
order via xfrm_state_delete() and __xfrm_state_delete(). This creates
an AB-BA deadlock that is reported by lockdep when a NAT keepalive
worker races with SA deletion.
Fix this by splitting the keepalive walk into two phases. First,
collect the candidate states while the walk holds xfrm_state_lock and
take a reference on each state. Then, after the walk completes, process
each collected state and acquire x->lock without nesting it under
xfrm_state_lock.20hCVE-2026-80843——
———In the Linux kernel, the following vulnerability has been resolved:
xfrm: fix xfrm_state_construct() auth-trunc leak
attach_auth_trunc() can allocate x->aalg while leaving
x->props.aalgo at zero when the selected auth algorithm has no
sadb_alg_id. One real case is cmac(aes).
xfrm_state_construct() then treats !x->props.aalgo as "no auth
algorithm attached yet" and calls attach_auth(). That overwrites
x->aalg and loses the first allocation. Any later failure or teardown
only frees the replacement pointer.
Check whether x->aalg is already attached instead of inferring that
state from x->props.aalgo.20hCVE-2026-80839——
———In the Linux kernel, the following vulnerability has been resolved:
batman-adv: reject unrepresentable multicast TVLV offsets
The network and transport header fields in struct sk_buff are 16-bit
offsets from skb->head, and U16_MAX is reserved as the unset transport
header value. batadv_tvlv_call_handler() sets both fields from a received
multicast TVLV without checking whether the TVLV end is representable.
If the end offset exceeds the field's range, skb_set_transport_header()
truncates it so that the transport header precedes the network header.
The negative difference is then returned by skb_network_header_len() as
a large u32. batadv_mcast_forw_packet() consequently accepts an oversized
multicast tracker and accesses memory beyond the skb data.
Add skb_set_transport_header_careful(), an offset-aware counterpart to
skb_reset_transport_header_careful(), which validates the final
head-relative offset before assigning it. Use the new helper in
batadv_tvlv_call_handler() and reject unrepresentable TVLVs before
setting the network header.20hCVE-2026-80896——
———In the Linux kernel, the following vulnerability has been resolved:
mshv: Fix race in mshv_irqfd_deassign
mshv_irqfd_deactivate() and the hlist traversal of pt_irqfds_list
require pt->pt_irqfds_lock to be held, but mshv_irqfd_deassign()
omits it. This races with the EPOLLHUP path in mshv_irqfd_wakeup(),
which does take the lock before calling mshv_irqfd_deactivate().
Additionally, mshv_irqfd_deactivate() uses hlist_del() which poisons
the node pointers rather than resetting them. Since
mshv_irqfd_is_active() relies on hlist_unhashed() (checks pprev ==
NULL), a poisoned node still appears active. If a concurrent path calls
mshv_irqfd_deactivate() again on the same irqfd, the guard fails to
prevent a double hlist_del() on poisoned pointers.
Fix both issues:
- Add the missing spin_lock_irq/spin_unlock_irq around the list
traversal in mshv_irqfd_deassign(), matching mshv_irqfd_release().
- Use hlist_del_init() instead of hlist_del() so the node is properly
marked as unhashed after removal, making the is_active guard reliable.18hCVE-2026-80838——
———In the Linux kernel, the following vulnerability has been resolved:
vxlan: keep the last remote linked during FDB flush
A non-nexthop FDB entry is expected to have at least one remote while it
remains reachable through the FDB hash table. A filtered bulk flush
violates this invariant when every remote matches: It unlinks the last
remote in vxlan_fdb_dst_destroy() and only afterwards tells vxlan_flush()
to destroy the parent FDB entry.
An RCU reader can find the parent during this interval.
first_remote_rcu() then applies list_entry_rcu() to the empty list head,
producing an invalid remote pointer that the receive learning path can
read from and write to.
When a matching remote is the sole remaining remote, leave it linked and
ask the caller to destroy the entire FDB entry. vxlan_fdb_destroy() keeps
the remote attached while sending the deletion notification and removing
the parent from the lookup structures.20hCVE-2026-80840——
———In the Linux kernel, the following vulnerability has been resolved:
ipv6: seg6: clear IPv4 control block on IPIP decapsulation
End.DX4 and End.DT4 decapsulate an IPv4 packet through
decap_and_validate() and send it directly to IPv4 routing. The inner
packet therefore bypasses ip_rcv_core(), which normally clears IPCB
before IPv4 interprets skb->cb.
The skb instead retains IP6CB data from the outer packet. IP6CB and
IPCB use the same skb->cb storage, so IP6CB(skb)->lastopt overlaps
IPCB(skb)->opt.optlen and srr, while IP6CB(skb)->nhoff overlaps rr and
ts.
The sender can make the stale optlen byte nonzero with a valid outer
extension-header chain. The reproducers put an eight-byte Destination
Options header immediately after the 40-byte IPv6 header and before the
Segment Routing Header. ipv6_destopt_rcv() records the sender-controlled
Destination Options offset in both lastopt and nhoff, setting them to
40. On the reproduced little-endian x86-64 kernel, IPv4 therefore sees
optlen = 40 and rr = 40.
Both tcp_v4_save_options() and __ip_options_echo() skip option copying
when optlen is zero. Here optlen is 40, so the TCP SYN path allocates
room for 40 bytes of option data and calls __ip_options_echo(). The
stale rr value makes that function read inner packet byte 41 as the
Record Route option length. The reproducers set that sender-controlled
byte to 255, so __ip_options_echo() copies 255 bytes into the 40-byte
option-data area.
Separate End.DX4 and End.DT4 reproducers on the unpatched v7.2-rc5
kernel both produced:
BUG: KASAN: slab-out-of-bounds in __ip_options_echo()
Write of size 255
The relevant End.DX4 call path is:
__ip_options_echo
tcp_v4_route_req
tcp_conn_request
tcp_v4_conn_request
tcp_rcv_state_process
tcp_v4_do_rcv
tcp_v4_rcv
ip_protocol_deliver_rcu
ip_local_deliver_finish
ip_local_deliver
input_action_end_dx4_finish
input_action_end_dx4
The relevant End.DT4 call path is:
__ip_options_echo
tcp_v4_route_req
tcp_conn_request
tcp_v4_conn_request
tcp_rcv_state_process
tcp_v4_do_rcv
tcp_v4_rcv
ip_protocol_deliver_rcu
ip_local_deliver_finish
ip_local_deliver
input_action_end_dt4
tcp_v4_save_options() is inlined into the tcp_v4_route_req() path, so
it does not appear as a separate frame.
When decap_and_validate() handles IPPROTO_IPIP, save the ingress
interface from IP6CB, clear IPCB, and restore the saved value. Doing
this in the common decapsulation path covers End.DX4, End.DT4, and
End.DT46's IPv4 arm.
Use IP6CB(skb)->iif rather than skb->skb_iif. These actions run after
l3mdev processing, which can replace skb_iif with the L3 master;
IP6CB iif still records the receiving interface set at IPv6 ingress.20hCVE-2026-80900——
———In the Linux kernel, the following vulnerability has been resolved:
ASoC: SDCA: Make UMP message size check more robust
If message offset was larger than the buffer length the size
check will pass incorrectly. Refactor the check such that it is
more robust to invalid sizes.18hCVE-2026-80902——
———In the Linux kernel, the following vulnerability has been resolved:
dmaengine: sun6i-dma: Fix reclaim descriptors while terminating DMA
When terminating DMA transfers, active descriptors are not properly
reclaimed. Only cyclic descriptors were handled, leaving non-cyclic
descriptors and their LLI chains to be permanently leaked.
Fix by using vchan_terminate_vdesc() which handles both cyclic and
non-cyclic descriptors by adding them to desc_terminated queue for
proper cleanup.
Add pchan->desc != pchan->done check to prevent double-adding completed
descriptors, which would corrupt the list.18hCVE-2026-80837——
———In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: don't queue packet path object notifications
All file:line references below are against v7.2-rc4 (ac5b0e5651b1). The
trace was captured on 7.2.0-rc6-kasan72rc6 (075b74841bd0), where the same
lines apply.
nft_obj_notify() is exported and reached from the packet path. Its only
in-tree caller is nft_quota_obj_eval() (net/netfilter/nft_quota.c:68),
which notifies with GFP_ATOMIC while evaluating a rule for a transiting
packet, holding no mutex.
Since commit 67cc570edaa0 ("netfilter: nf_tables: coalesce multiple
notifications into one skbuff") that notification is no longer sent
immediately. __nft_obj_notify() queues it onto nft_net->notify_list via
nft_notify_enqueue() (net/netfilter/nf_tables_api.c:1211), which is a bare
list_add_tail(). notify_list has no lock of its own
(include/net/netfilter/nf_tables.h:1951), it is serialised by commit_mutex:
the six other enqueue sites all run inside a netlink transaction, and the
drain in nft_commit_notify() (net/netfilter/nf_tables_api.c:10746) does
list_del() + kfree_skb() from nf_tables_commit() with commit_mutex held.
Sending packets through a chain that references a depleted quota object
therefore races an unlocked list_add_tail() against list_del() +
kfree_skb() on another CPU. The WRITE_ONCE(prev->next, new) in __list_add()
then stores through an sk_buff that has already been freed:
BUG: KASAN: slab-use-after-free in __nft_obj_notify+0x2c5/0x2d0
Write of size 8 at addr ff110001047183c0 by task poc/76
CPU: 0 UID: 1000 PID: 76 Comm: poc Tainted: G W 7.2.0-rc6-kasan72rc6 #4
Call Trace:
<IRQ>
__nft_obj_notify (include/linux/list.h:164 include/linux/list.h:191
net/netfilter/nf_tables_api.c:1211
net/netfilter/nf_tables_api.c:8743)
nft_quota_obj_eval (net/netfilter/nft_quota.c:68)
nft_do_chain_inet
nf_hook_slow
__ip_local_out
ip_push_pending_frames
udp_send_skb
udp_sendmsg
__x64_sys_sendto
Allocated by task 77:
__alloc_skb (net/core/skbuff.c:704)
__nft_obj_notify (include/net/netlink.h:1055
net/netfilter/nf_tables_api.c:8731)
nft_quota_obj_eval (net/netfilter/nft_quota.c:68)
nft_do_chain
Freed by task 79:
nf_tables_commit (include/linux/skbuff.h:1332
net/netfilter/nf_tables_api.c:10759
net/netfilter/nf_tables_api.c:11185)
nfnetlink_rcv_batch (net/netfilter/nfnetlink.c:574)
netlink_unicast
netlink_sendmsg
The buggy address belongs to the cache skbuff_head_cache of size 232
Queueing from the packet path is wrong even leaving the race aside:
notify_list is only drained by nft_commit_notify() from nf_tables_commit()
(:11185), so a notification enqueued outside a transaction is not sent
until some later netlink batch commits, if one ever does.
The gfp argument that nft_obj_notify() still takes is a leftover of the
pre-67cc570edaa0 behaviour, where this path called nfnetlink_send()
directly. Restore that: split the message construction out into
nft_obj_notify_alloc() and let each caller decide what to do with the skb.
nft_obj_notify(), the exported one reached from the packet path, sends it
straight away; nf_tables_obj_notify(), which runs under commit_mutex, keeps
queueing it, so transaction notifications are still coalesced.20hCVE-2026-80836——
———In the Linux kernel, the following vulnerability has been resolved:
crypto: virtio - bound the akcipher result length
virtio_crypto_dataq_akcipher_callback() sets the result length from the
device-reported response length without bounding it to the destination
buffer, which was allocated for the original request length.
sg_copy_from_buffer() then reads that many bytes from the destination
buffer; a backend reporting a larger length over-reads adjacent kernel
heap into the caller's scatterlist (an out-of-bounds read).
Clamp the reported length to the originally requested destination length.
A conforming device reports no more than that, so valid results are
unaffected.20hCVE-2026-80834——
———In the Linux kernel, the following vulnerability has been resolved:
crypto: sun8i-ce - Remove crypto_rng interface
Since the crypto_rng interface for hardware PRNGs is unused and is
redundant with hwrng and the actual Linux RNG, it's being phased out.
Most drivers for it were already removed. Go ahead and remove the
sun8i-ce support which is one of the only remaining ones.
Note that the sun8i-ce support for hwrng remains in place. That is the
interface that actually matters.
As usual for crypto_rng, this driver was also buggy: its ->generate()
function had a use-after-free vulnerability due to using
wait_for_completion_interruptible_timeout() without handling shutting
down the DMA operation if a signal is sent. There's no point in fixing
this separately only to remove the code anyway, so this commit is marked
with Fixes and Cc stable.20hCVE-2026-80904——
———In the Linux kernel, the following vulnerability has been resolved:
net/tls: Fail tls_sw_splice_read() after a failed async decrypt
When an async decrypt fails, tls_decrypt_done() records the error in
ctx->async_wait.err and calls tls_err_abort(), which stores it in
sk_err. tls_sw_recvmsg() and tls_sw_read_sock() each read
async_wait.err once they hold the reader lock and fail the call: a
record that did not authenticate breaks the connection.
tls_sw_splice_read() has no such check, and sk_err does not stand in
for one. tls_rx_rec_wait() tests sk_err only inside the loop it
skips whenever a record is already parsed, and the first reader to
reach sock_error() clears it, while async_wait.err persists. A
splice therefore keeps delivering records on a connection that
recvmsg() and read_sock() refuse to read.
Read async_wait.err in tls_sw_splice_read() as the other two readers
do.18hCVE-2026-80905——
———In the Linux kernel, the following vulnerability has been resolved:
net: tap: fix wrong transport_header when sending VLAN-tagged frame
In tap_get_user_xdp(), when processing a VLAN-tagged frame (e.g.
ETH_P_8021Q), skb_set_network_header() is called first to advance
network_header past the VLAN tag to the inner protocol header.
skb_probe_transport_header() is then called with skb->protocol still
set to ETH_P_8021Q, while nhoff (derived from skb_network_offset())
already points past the VLAN tag to the inner protocol header.
In __skb_flow_dissect(), proto is initialized to ETH_P_8021Q and nhoff
points past the VLAN tag. When the dissector hits case ETH_P_8021Q, it
reads a struct vlan_hdr at the current nhoff via __skb_header_pointer(),
but that offset contains the inner protocol header (e.g. an IP header).
The bytes are misinterpreted as a VLAN header, yielding a garbage
encapsulated EtherType that matches no known protocol. The dissector
returns false, so skb_probe_transport_header() never calls
skb_set_transport_header(), leaving transport_header at its uninitialized
sentinel value (~0U).
Move skb_set_network_header() to after skb_probe_transport_header(). At
the time skb_probe_transport_header() is called, network_header still
points to the VLAN header (offset ETH_HLEN), so nhoff is correct and the
flow dissector can parse the VLAN header, extract the inner EtherType,
and advance nhoff to the inner protocol header, allowing transport_header
to be set correctly.18hCVE-2026-80830——
———In the Linux kernel, the following vulnerability has been resolved:
usb: core: Add lock to usb_wakeup_notification()
Add a spin lock to usb_wakeup notification to prevent a race condition
with dereferencing freed memory. This could be hit by the xHCI driver as
it calls this function from an IRQ and could race with the
hub_disconnect() function, which properly grabs this lock to protect the
state of the device.20hCVE-2026-80906——
———In the Linux kernel, the following vulnerability has been resolved:
net: packet: fix wrong transport_header when sending VLAN-tagged frame
In packet_parse_headers(), when processing a VLAN-tagged frame,
skb_set_network_header() is called to advance network_header past the
VLAN tag to the inner protocol header. skb_probe_transport_header() is
then called with skb->protocol still set to the outer VLAN EtherType
(e.g. ETH_P_8021Q), while nhoff (derived from skb_network_offset())
already points past the VLAN tag to the inner protocol header.
In __skb_flow_dissect(), proto is initialized to ETH_P_8021Q and nhoff
points past the VLAN tag. When the dissector hits case ETH_P_8021Q, it
reads a struct vlan_hdr at nhoff via __skb_header_pointer(), but that
offset contains the inner protocol header (e.g. an IP header). The bytes
are misinterpreted as a VLAN header, yielding a garbage encapsulated
EtherType that matches no known protocol. The dissector returns false,
so skb_probe_transport_header() never calls skb_set_transport_header(),
leaving transport_header at its uninitialized sentinel value (~0U).
Move skb_probe_transport_header() to before skb_set_network_header(). At
the time skb_probe_transport_header() is called, network_header still
points to the VLAN header, so nhoff correctly points to the VLAN header.
The flow dissector can then parse the VLAN header, extract the inner
EtherType, and advance nhoff to the inner protocol header, allowing
transport_header to be set correctly.18hCVE-2026-80907——
———In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix UVD dpb min size calculation for H264
This should use actual number of references from the decode
message, instead of maximum derived from level.
(cherry picked from commit 64b525edb7e7bdfcdc77883c5e413804e2396856)18hCVE-2026-80832——
———In the Linux kernel, the following vulnerability has been resolved:
crypto: qce - fix CCM AAD buffer underallocation
The AAD buffer allocated in qce_aead_ccm_prepare_buf_assoclen()
can be smaller than the length later programmed into the DMA
scatterlist.
The allocation size is currently calculated as:
ALIGN(assoclen, 16) + MAX_CCM_ADATA_HEADER_LEN
while the DMA length is set to:
ALIGN(assoclen + adata_header_len, 16)
Since ALIGN() does not distribute over addition, the allocation
can be smaller than the DMA length. For example, when
assoclen = 32 and adata_header_len = 2:
allocation = ALIGN(32, 16) + 6 = 38
DMA length = ALIGN(32 + 2, 16) = 48
As a result, the QCE hardware can read beyond the allocated
buffer while computing the CBC-MAC over the associated data.
The extra bytes are folded into the authentication tag,
resulting in an incorrect tag and causing CCM self-test
failures such as:
alg: aead: ccm-aes-qce encryption test failed (wrong result)
on test vector 8
Fix the allocation by adding the maximum possible AAD header
length before alignment:
ALIGN(assoclen + MAX_CCM_ADATA_HEADER_LEN, 16)
This guarantees that the allocated buffer is large enough
for the fully padded AAD data for all supported header sizes.20hCVE-2026-80831——
———In the Linux kernel, the following vulnerability has been resolved:
crypto: mxs-dcp - fix source scatterlist length access
mxs_dcp_aes_block_crypt() uses sg_dma_len() without mapping the source
scatterlist with dma_map_sg() first. Therefore, sg_dma_len() is invalid
and could return zero or a stale DMA length, causing encryption and
decryption to process the wrong number of bytes when
CONFIG_NEED_SG_DMA_LENGTH=y.
Use the original scatterlist length instead.20hCVE-2026-80908——
———In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Reject UVD message with dimensions above 4096
Fixes potential overflow in DPB size calculations.
(cherry picked from commit 05e1387d151f71569fbe122d2c89f9db0c21dc10)18hCVE-2026-80828——
———In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Complete cleanup after system-resume errors
A failed system resume can leave the card unusable until reboot.
usb_audio_resume() jumps to err_out when snd_usb_pcm_resume() or
snd_usb_mixer_resume() fails. The error path skips the out: block, which
restores D0 and decrements chip->num_suspended_intf.
The card stays in SNDRV_CTL_POWER_D3hot, so later control access blocks in
snd_power_ref_and_wait(). USB core logs an interface resume callback error.
It does not retry that callback, so a later callback cannot complete the
skipped cleanup.
usb_audio_suspend() increments num_suspended_intf before returning success.
A system-resume callback must consume the system-suspend count even if a
component resume fails. Otherwise, the stranded count skews later suspend
and resume cycles.
Do not apply this cleanup to runtime-resume errors. Runtime PM can retry
-EAGAIN or -EBUSY without another suspend callback. The count must continue
to describe that suspended interface. Other runtime-resume errors latch
runtime_error in the PM core and do not cause an immediate callback retry.
Both parts of the system-resume error path are longstanding. Commit
88a8516a2128a ("ALSA: usbaudio: implement USB autosuspend") introduced
err_out past the D0 restore. Commit 862b2509d157c ("ALSA: usb-audio: Fix
inconsistent card PM state after resume") later moved
num_suspended_intf-- into the out: block. The error path now skips both
operations.
No third-party code is needed to reach the error path.
snd_usb_mixer_resume() ends in snd_usb_mixer_activate(), which returns the
result of usb_submit_urb() for devices that have a mixer status URB. Its
mixer->private_resume hook can also fail through scarlett2_init_notify().
snd_usb_pcm_resume() issues a SET_CUR request to a UAC3 power domain. It
can return -EPIPE or -EIO when the device stalls the request.
Route a component error through out: only when system_suspend is nonzero.
Continue to return runtime-resume errors through err_out. Later component
resume stages remain skipped. The original error still reaches USB core.
A later transfer can fail if the device did not recover.
I reproduced the system-resume failure on an Audient iD14 MkI with an
out-of-tree diagnostic mixer resume hook. An injected -EIO on the unpatched
core left control readers in uninterruptible sleep in
snd_power_ref_and_wait() until a reboot. With this patch, the same failure
restored control access. A second system suspend and resume also succeeded
after I disabled fault injection.20hCVE-2026-80826——
———In the Linux kernel, the following vulnerability has been resolved:
USB: c67x00: fix use-after-free in c67x00_add_iso_urb()
When TD creation fails for the last packet of an isochronous URB,
c67x00_add_iso_urb() gives the URB back before updating the endpoint
scheduling state.
c67x00_giveback_urb() frees the URB private data, and the completion
callback may release the final URB reference. The following accesses to
urbp->ep_data, urb->interval, and urbp->cnt can therefore use freed
memory.
Update next_frame and cnt before giving back the failed final packet,
making the giveback the last operation that uses the URB and its private
data.20hCVE-2026-80824——
———In the Linux kernel, the following vulnerability has been resolved:
usb: usbfs: fix use-after-free of usb_device in usbdev_release()
usbdev_release() drops its reference to the struct usb_device before
draining the list of completed async URBs, but that drain path reads back
through the same object: free_async() calls dec_usb_memory_use_count()
for any URB whose buffer came from the usbfs mmap() region, and its first
statement is bus_to_hcd(ps->dev->bus).
After a disconnect the usbfs reference can be the last one, in which case
usb_put_dev() frees the device and the subsequent loop reads offset 80 of
freed memory and uses the result as a struct usb_hcd *, which
hcd_buffer_free_pages() then dereferences.
This is reachable by an unprivileged process that has read/write access to
a /dev/bus/usb node: mmap() the fd, submit one URB with a buffer inside the
mapping, wait for the device to be unplugged, then munmap() and close().
It reproduces on every attempt rather than being a race, because a live
MAP_SHARED vma holds a reference on the struct file, so usbdev_release()
cannot run until the last vma is gone and the freeing branch of
dec_usb_memory_use_count() is always taken.
BUG: KASAN: slab-use-after-free in dec_usb_memory_use_count+0x3ae/0x410
Read of size 8 at addr ffff8880122ee050 by task poc/769
CPU: 1 UID: 1000 PID: 769 Comm: poc Tainted: G B 6.12.94 #3
Call Trace:
dec_usb_memory_use_count+0x3ae/0x410
free_async+0x2aa/0x4f0
usbdev_release+0x375/0x460
__fput+0x3ea/0xb50
__x64_sys_close+0x86/0x100
Allocated by task 11:
usb_alloc_dev+0x55/0xd90
hub_event+0x2524/0x43d0
Freed by task 769:
kfree+0x121/0x360
device_release+0xd2/0x280
usb_put_dev+0x23/0x30
usbdev_release+0x2d8/0x460
Release the device reference after the drain loop instead. Nothing between
the two points requires it to have been dropped.20hCVE-2026-80910——
———In the Linux kernel, the following vulnerability has been resolved:
ASoC: codecs: lpass-wsa-macro: Fix enum kcontrol accesses
EAR SPKR PA Gain" and the four "WSA RX* Mux" controls are enumerated,
but their get and put callbacks access the value through
ucontrol->value.integer.value[0] (a long) instead of
ucontrol->value.enumerated.item[0] (an unsigned int).
This same pattern was fixed in the sibling drivers by
commit bcfe5f76cc40 ("ASoC: codecs: rx-macro: fix accessing array
out of bounds for enum type") and
commit 0ea5eff7c606 ("ASoC: codecs: va-macro: fix accessing array
out of bounds for enum type"), but wsa-macro was missed.
On 64-bit kernels with CONFIG_SND_CTL_DEBUG this trips the elem value
sanity check and every read of these controls fails with -EINVAL.18hCVE-2026-80823——
———In the Linux kernel, the following vulnerability has been resolved:
nfc: st21nfca: validate ATR_REQ length against the received frame
st21nfca_tm_recv_atr_req() checks that the received ATR_REQ frame is at
least ST21NFCA_ATR_REQ_MIN_SIZE and that the self-declared atr_req->length
is at least sizeof(struct st21nfca_atr_req), but never checks that
atr_req->length does not exceed the actual received length (skb->len).
st21nfca_tm_send_atr_res() then trusts the declared length:
gb_len = atr_req->length - sizeof(struct st21nfca_atr_req);
...
memcpy(atr_res->gbi, atr_req->gbi, gb_len);
so an RF peer that sends a short frame but sets atr_req->length larger
than the frame makes gb_len exceed the general bytes actually present,
and the memcpy reads out of bounds past the received skb. Those bytes are
placed in the ATR_RES and sent back to the peer (kernel-memory disclosure
to a proximity attacker); a larger declared length is an out-of-bounds
read (DoS).
Reject frames whose declared length exceeds the received length. The
adjacent nfc_tm_activated() path in the same function already derives its
general-bytes length from skb->len rather than the declared field.
Found by 0sec (https://0sec.ai) using automated source analysis; the
missing bound is evident from source. Compile-tested.20hCVE-2026-80822——
———In the Linux kernel, the following vulnerability has been resolved:
mailbox: mchp-ipc-sbi: Add null check for devm_kasprintf()
Add a check to see if devm_kasprintf() is not NULL in
mchp_ipc_get_cluster_aggr_irq(), returning -ENOMEM if the function
failed.20hCVE-2026-80819——
———In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: take rfcomm_mutex for the deferred setup accept
rfcomm_sock_recvmsg() completes a deferred setup by calling
rfcomm_dlc_accept() without holding any RFCOMM lock:
if (test_and_clear_bit(RFCOMM_DEFER_SETUP, &d->flags)) {
rfcomm_dlc_accept(d);
return 0;
}
and rfcomm_dlc_accept() dereferences the session on its first line:
struct sock *sk = d->session->sock->sk;
Every other path that touches d->session runs under rfcomm_mutex:
rfcomm_dlc_open(), rfcomm_dlc_close(), rfcomm_dlc_exists(),
rfcomm_dlc_send_rpn(), and the RFCOMM thread through
rfcomm_process_sessions(). rfcomm_connect_ind() is even documented as
"called under rfcomm_lock()". This call site is the only one that skips
it.
The RFCOMM_DEFER_SETUP bit looks like it serialises the accept against
teardown, since __rfcomm_dlc_close() returns early when it wins the
test_and_clear. But rfcomm_recv_disc() forces the state first:
d->state = BT_CLOSED;
__rfcomm_dlc_close(d, err);
and the early return only covers BT_CONNECT, BT_CONFIG, BT_OPEN and
BT_CONNECT2. With the state already BT_CLOSED that switch does not
match, the bit is never consulted, and __rfcomm_dlc_close() falls
through to rfcomm_dlc_unlink(), which sets d->session = NULL.
So a remote DISC on a deferred dlc clears the session while leaving
RFCOMM_DEFER_SETUP set. The next recvmsg() then passes the
test_and_clear and dereferences a NULL session. No timing window is
needed: once the DISC has been processed, the dereference is
unconditional.
Give rfcomm_dlc_accept() the same shape as rfcomm_dlc_open() and
rfcomm_dlc_close(): an exported wrapper that takes rfcomm_mutex and
re-checks the session, around a __rfcomm_dlc_accept() that the two
in-core callers, which already hold the mutex, keep using.
Reproduced on a KASAN + PROVE_LOCKING kernel with a BR/EDR peer emulated
over /dev/vhci: the peer brings up an ACL link, opens L2CAP on the
RFCOMM PSM, starts a session, opens a dlc on a channel bound with
BT_DEFER_SETUP, and sends DISC after the socket is accepted. recv() on
the accepted socket then hits:
Oops: general protection fault
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
RIP: 0010:rfcomm_dlc_accept+0x54/0x350
Call Trace:
rfcomm_sock_recvmsg+0x1cd/0x230
sock_recvmsg+0x166/0x1c0
__sys_recvfrom+0x20d/0x300
0x10 is the offset of sock in struct rfcomm_session. With this patch the
same run completes with recv() returning 0 and no report, and lockdep
stays quiet, confirming rfcomm_mutex is still taken before lock_sock on
this path as it is on the thread side.20hCVE-2026-80820——
———In the Linux kernel, the following vulnerability has been resolved:
xfs: don't livelock in scrub on a circular unlinked list
LOLLM points out that online fsck can livelock if an unlinked inode list
contains a loop. Use a bitmap to detect cycles.20hCVE-2026-80911——
———In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: sof-audio: Fix error path in sof_widget_setup_unlocked()
If either tplg_ops->dai_config or widget_kcontrol_setup fail during widget
setup we would double decrement the use_count of the widget because the
sof_widget_free_unlocked() would be called twice, similarly the core_put
would be invoked twice as well.
Since the use_count and core_put() is handled within the widget_free
function we need to return without falling through the pipe_widget_free
label.
The fixes tag is picked to the last change around this part of the code
which is adequately old enough for backporting purposes.18hCVE-2026-80814——
———In the Linux kernel, the following vulnerability has been resolved:
rndis_host: add overflow check in rndis_rx_fixup()
Add an overflow check to ensure that data_offset + data_len + 8 does not
wrap, which would enable an OOB read of the USB data buffer.20hCVE-2026-80817——
———In the Linux kernel, the following vulnerability has been resolved:
iommu/iommufd: Fix NULL pointer deref in iommufd_ioas_change_process when racing with iopt_map_file_pages
iommufd_ioas_change_process() iterates every IOAS area while only
holding every IOAS iova_rwsem, so it assumes every area has a non-NULL
pages pointer. That assumption can be false when it runs concurrently
with iopt_map_file_pages().
iopt_map_pages() executes in two phases. It first creates the area and
inserts it into the interval tree under iova_rwsem, with area->pages
still NULL. It then drops iova_rwsem and later fills area->pages
under domains_rwsem. This leaves a window between area creation and
area->pages fill where a concurrent iommufd_ioas_change_process()
can observe the area and dereference a NULL area->pages pointer,
leading to a NULL pointer dereference:
BUG: kernel NULL pointer dereference, address: 00000000000000c0
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 4b655067 P4D 4b655067 PUD 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 11841 Comm: syz.1.628 Not tainted 7.1.0 #3 PREEMPT(full)
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:iommufd_ioas_change_process+0x419/0xd50 drivers/iommu/iommufd/ioas.c:538
Code: 48 89 c3 48 85 c0 0f 84 cc 00 00 00 e8 10 f5 cb fd 48 8d 7b 68 e8 a7 b5 eb fd 48 8b 6b 68 48 8d bd c0 00 00 00 e8 17 b2 eb fd <8b> ad c0 00 00 00 bf 01 00 00 00 89 ee e8 85 ef cb fd 83 fd 01 74
RSP: 0018:ffffc90015c17d28 EFLAGS: 00010246
RAX: ffff8880186d5328 RBX: ffff88801d25e240 RCX: 0000000080000000
RDX: 00000000000002d7 RSI: ffffffff83ba9e10 RDI: 00000000000000c0
RBP: 0000000000000000 R08: ffffffff8e781eb8 R09: 0000000000000000
R10: 00000000000000c0 R11: ffffffff83ba9e29 R12: ffff88802e216008
R13: ffff88802e216000 R14: 0000000000000001 R15: 0000000000000000
FS: 00007f4aea3f66c0(0000) GS:ffff8880b1fa1000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000c0 CR3: 000000004b75c000 CR4: 0000000000350ef0
Call Trace:
<TASK>
iommufd_fops_ioctl+0x287/0x400 drivers/iommu/iommufd/main.c:533
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x120/0x170 fs/ioctl.c:583
x64_sys_call+0x1092/0x1fb0 arch/x86/include/generated/asm/syscalls_64.h:17
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x10a/0x680 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f4aec1a82bd
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f4aea3f6018 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007f4aec436090 RCX: 00007f4aec1a82bd
RDX: 0000200000000180 RSI: 0000000000003b92 RDI: 0000000000000003
RBP: 00007f4aec250295 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f4aec436128 R14: 00007f4aec436090 R15: 00007ffd04ef23e0
</TASK>
Modules linked in:
CR2: 00000000000000c0
---[ end trace 0000000000000000 ]---
RIP: 0010:iommufd_ioas_change_process+0x419/0xd50 drivers/iommu/iommufd/ioas.c:538
Code: 48 89 c3 48 85 c0 0f 84 cc 00 00 00 e8 10 f5 cb fd 48 8d 7b 68 e8 a7 b5 eb fd 48 8b 6b 68 48 8d bd c0 00 00 00 e8 17 b2 eb fd <8b> ad c0 00 00 00 bf 01 00 00 00 89 ee e8 85 ef cb fd 83 fd 01 74
RSP: 0018:ffffc90015c17d28 EFLAGS: 00010246
RAX: ffff8880186d5328 RBX: ffff88801d25e240 RCX: 0000000080000000
RDX: 00000000000002d7 RSI: ffffffff83ba9e10 RDI: 00000000000000c0
RBP: 0000000000000000 R08: ffffffff8e781eb8 R09: 0000000000000000
R10: 00000000000000c0 R11: ffffffff83ba9e29 R12: ffff88802e216008
R13: ffff88802e216000 R14: 0000000000000001 R15: 0000000000000000
FS: 00007f4aea3f66c0(000
---truncated---20hCVE-2026-825388.8 HIG—
———ILIAS before versions 9.22, 10.10, and 11.3 contains a SQL injection vulnerability in the repository trash table where the table navigation sort field from HTTP requests is passed directly into the ORDER BY clause of a SQL query without validation against declared sortable columns. Authenticated users with write permission on any container can inject arbitrary SQL through the sort parameter, and because multi-statement execution is enabled in the database layer, stacked queries enable full database read and write access as well as administrator account takeover.18hCVE-2026-848905.9 MED—
———undici's decompress interceptor decompresses response bodies according to the untrusted Content-Encoding header. While the number of content-encoding layers is capped, the total decompressed output size is unbounded and there is no configuration option to limit it. A malicious or faulty upstream can therefore return a small compressed payload, a compression bomb, that expands to hundreds of megabytes or more in client memory, an asymmetric resource consumption that can exhaust memory and crash the process. This affects undici versions from 7.15.0 up to 7.29.1 and from 8.0.0 up to 8.10.2. Users should upgrade to undici 7.29.1 or 8.10.2.17hCVE-2026-80812——
———In the Linux kernel, the following vulnerability has been resolved:
ALSA: dummy: Check card index validity at probe
snd_dummy_probe() blindly trusts that the given devptr->id value is
within the proper card index range. It's OK for the devices the
driver itself creates at the module probe time, but if the device is
bound manually via sysfs interface, this could be -1 as "none", and
this leads to OOB access for index[] and other parameters.
Add a sanity check for the card index and warn/correct it if it's a
value out of the range.20hCVE-2026-80811——
———In the Linux kernel, the following vulnerability has been resolved:
io_uring/cmd: fix iovec leak when the async cmd is not recycled
An io_async_cmd carries an iovec array in ->vec.iovec, allocated when the
vec has to grow and kept across recycling through ctx->cmd_cache. On two
paths nothing frees it and io_clean_op()'s kfree(req->async_data) drops
the io_async_cmd without it.
io_req_uring_cleanup() clears the async data flags only when
io_alloc_cache_put() succeeds, and the cache holds IO_ALLOC_CACHE_MAX ==
128 entries, so once it is full the put fails and the vec is left behind.
An NVMe passthrough workload gets there without doing anything unusual:
nvme_uring_cmd_io() returns -EIOCBQUEUED, so the io_async_cmd stays
attached for the lifetime of the command and the live object count tracks
the queue depth. Above 128 the puts start failing.
->cleanup is the last chance to free an inherited vec, since
io_req_uring_cleanup() returns early for an io-wq issued command and is
not called at all for one completed without ever being issued. But
io_clean_op() calls ->cleanup only if REQ_F_NEED_CLEANUP is set, and for
uring_cmd that happens only where the vec has to grow, so a command
reusing a large enough cached vec never sets it. io_rw_alloc_async() and
io_msg_alloc_async() flag an inherited vec for exactly this reason;
io_uring_cmd_prep() does not.
Flag an inherited vec in io_uring_cmd_prep(), and free the vec when the
cache put fails, as io_req_rw_cleanup() does.
The leak is invisible under KASAN, where io_alloc_cache_vec_kasan() frees
the vec unconditionally.20hCVE-2026-856365.3 MED—
———A vulnerability was identified in jofpin trape 1.0.0. Affected by this vulnerability is an unknown functionality of the file core/stats.py of the component Login Endpoint. The manipulation leads to missing authentication. The attack may be initiated remotely. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet.18hCVE-2026-71620——
———File Upload vulnerability in Zhao-github ApiAdmin v.5.0.1 allows a remote attacker to execute arbitrary code via a crafted .php file17hCVE-2026-80808——
———In the Linux kernel, the following vulnerability has been resolved:
ext4: stop retrying saturated xattr cache entries
ext4_xattr_block_set() retries when a cache entry selected for reuse
has a saturated reference count after taking the buffer lock. The retry
returns to the mbcache lookup without making that entry ineligible, so
it can select the same unusable entry indefinitely. A task spinning
there can hold the parent directory's i_rwsem and leave concurrent
rmdir callers blocked.
Normally a reusable entry has a reference count below
EXT4_XATTR_REFCOUNT_MAX because the count and MBE_REUSABLE_B are
updated under the same buffer lock. A corrupted filesystem can violate
that invariant. The syzbot reproducer reports allocator and xattr
corruption before triggering this retry loop.
Check the untrusted on-disk count before incrementing it, avoiding
overflow, and clear MBE_REUSABLE_B when it is already saturated. The
next lookup then skips the entry that was just proven unusable. This
mirrors the normal transition at EXT4_XATTR_REFCOUNT_MAX; the release
path marks the entry reusable again on the exact 1024-to-1023
transition.
Using the same QEMU harness and guest parameters, current unpatched
Linux hung in 6 of 8 420-second trials with the do_rmdir signature;
representative NMI backtraces caught the owner spinning in
ext4_xattr_block_set(). The patched kernel completed 28 of 28 trials
without a hung-task report; the final twelve trials exercised the
reviewed overflow-safe form of the change. syzbot's patch testing also
completed without reproducing the hang.20hCVE-2026-783279.1 CRI—
———An Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in the SonicWall Network Security Manager (NSM) On-Prem Management interface allows an authenticated attacker with SuperAdmin privileges to inject arbitrary commands that are executed on the underlying host, resulting in remote code execution.16hCVE-2026-783289.1 CRI—
———A missing authorization vulnerability in the SonicWall Network Security Manager (NSM) On-Prem Management interface allows a lower-privileged Admin user to escalate privileges to SuperAdmin.16hCVE-2026-78839——
———An arbitrary file upload vulnerability in AppNitro MachForm v30 allows attackers to execute arbitrary code via uploading a crafted .phar file.17h