CVE Watch380,233 in full archive

Vulnerabilities exploitable today

380,233in current view

Single score combining CVSS, KEV membership and EPSS. Every CVE with its own record — timeline from publication to active exploitation.

In KEV catalog1,721

New KEV · 24H0

Exploit Today ≥ 701,640

Distribution · last window

Critical
2,316
High
8,470
Medium
6,946
Low
766

Filters

Window

Severity

Flags

Vulnerabilities380,161–380,200 · 380,233

CVECVSSEPSSKEVRExploitTitleMod.

CVE-2026-97598—

—

———In the Linux kernel, the following vulnerability has been resolved: ipv4: fib: bound automatic table ID allocation fib_empty_table() probes every table ID from 1 until it finds a free one. IPv4 tables are stored in a 256-bucket hash table, so a dense set of IDs makes each probe walk a growing hash chain while RTNL is held. Automatic table assignment ("ip rule ... table 0") is an IPv4-only legacy path. Bound the automatically allocated ID to 4096 so the RTNL hold stays bounded, without changing lookups of explicitly specified table IDs. This changes user-visible behavior. A table-0 rule previously received the lowest free ID in 1..RT_TABLE_MAX (0xFFFFFFFF). After this patch the search stops at 4096 and the rule add fails with ENOBUFS if that range is fully occupied. Explicit table IDs above 4096 remain usable. The automatic path is unused in practice: it is IPv4-only, not documented by ip-rule, uncovered by kernel selftests, and both NetworkManager and systemd refuse table 0.5h CVE-2026-97597—

—

———In the Linux kernel, the following vulnerability has been resolved: ipv6: flowlabel: cap duplicate leases per socket ipv6_flowlabel_get() allocates an ipv6_fl_socklist entry for every successful GET. The recheck path for a compatible existing flowlabel links another lease without applying any lease admission check. Repeated GET requests for one shareable label can therefore grow a socket's lease list without bound. Reject a new unprivileged lease once the socket already holds FL_MAX_PER_SOCK leases. Check this on the shared recheck path so reuse of a globally interned label, including the fl_intern() collision path, is covered as well. New-label admission remains under the existing mem_check() policy. Use capable(CAP_NET_ADMIN) rather than ns_capable(), matching mem_check(). An unprivileged user must not bypass the cap by creating a user namespace and a netns where they have CAP_NET_ADMIN, which would still consume host memory. Check the capability only when the socket reaches the limit, so successful unprivileged GET requests below the cap do not generate a capability audit. Do the admission check before updating linger and expires so a rejected GET does not refresh the shared label, matching the existing socket-list allocation failure path.5h CVE-2026-98146—

—

———In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Remove __counted_by from struct amdxdna_cmd_chain struct amdxdna_cmd_chain contains a flexible array annotated with __counted_by(command_count). Since the structure is stored in shared AMDXDNA_BO_SHARE memory, userspace can modify command_count concurrently. If command_count is changed to zero, the bounds check generated from __counted_by may fail and trigger a kernel panic. Remove __counted_by to avoid relying on the userspace-controlled command_count for the flexible array bounds check.5h CVE-2026-97596—

—

———In the Linux kernel, the following vulnerability has been resolved: ipvs: reject invalid states in connection template sync records IPVS sync receivers validate protocol states before creating or updating a connection. For connection templates, however, they only log states outside the template state range and still store the value in the connection. A template can be returned by ordinary connection lookup. TCP and SCTP then use the invalid state as an index into their transition tables. Reject invalid template states in both sync protocol versions before looking up or modifying a connection. The version 1 path handles both IPv4 and IPv6 records.5h CVE-2026-98035—

—

———In the Linux kernel, the following vulnerability has been resolved: bpf: Cancel special fields when recycling rhtab elements rhtab_map_update_existing() and rhtab_delete_elem() call bpf_obj_free_fields() when replacing or deleting a value. These map operations can run from BPF programs in NMI context, where releasing a referenced kptr or another complex field is not generally safe. Array and hash maps avoid that problem by cancelling only the asynchronous fields which can be stopped safely in the caller context. Other ownership state remains attached to the allocation until its memory allocator destructor performs the final cleanup. Use bpf_obj_cancel_fields() for the corresponding rhtab paths as well. This cancels timers, workqueues, and task work while allowing rhtab_mem_dtor() to release referenced kptrs when the allocation is eventually destroyed. [ kkd: Rebased, used direct helper calls, and rewrote the commit log ]5h CVE-2026-98036—

—

———In the Linux kernel, the following vulnerability has been resolved: bpf: Preserve special fields in recycled rhtab elements rhtab_map_update_elem() initializes special fields after obtaining an element from bpf_mem_cache_alloc(). The allocator can return a fresh, zeroed unit, or recycle one from its RCU-pending lists before the registered destructor has run. A BPF program can retain a map-value pointer after deleting its element and initialize and arm a timer through that pointer. If the deleted unit is recycled, check_and_init_map_value() clears the only pointer to the timer. Neither a later deletion nor rhtab_mem_dtor() can then cancel it, and the callback can run with its key and value pointing into freed memory. Do not reinitialize special fields on insertion. Fresh allocator units are already zeroed. For recycled units, the special fields are ownership state that must remain visible to the eventual destructor. copy_map_value() already skips those fields, matching the non-preallocated hash-map path and the lifecycle established by commit 275c30bcee66 ("bpf: Don't reinit map value in prealloc_lru_pop"). [ kkd: Split out the fix and rewrote the commit log ]5h CVE-2026-61604—

—

———The ixo Blockchain is a Layer 1 blockchain that runs on both Testnet and Mainnet. Prior to version 8.0.0, the x/bonds module moved funds from an address that was resolved from a DID verification method, without verifying that the resolved address belonged to the transaction signer. Affected handlers included MsgMakeOutcomePayment, MsgBuy, MsgSell, MsgSwap, and MsgWithdrawShare, as well as the batch order processor. Because any account may list an arbitrary blockchainAccountID as a verification method on a DID it controls (without the consent of that address's owner), an attacker could register victims' addresses as verification methods on their own DID and then move the victims' balances into a bond the attacker controlled — later withdrawing and bridging the proceeds off-chain. This was exploited on ixo mainnet (ixo-5) on 2026-06-20. The attack required no victim keys, signatures, or system compromise — any account holding a balance in a token a bond could use was at risk. This was fixed in v8.0.0, delivered via the on-chain v8 software-upgrade. The x/bonds module is disabled: every bonds message is rejected on all routes (top-level, authz, CosmWasm, and ICA), and the bonds batch EndBlocker is a no-op so no further reserve movements can occur. All node operators and validators must upgrade to v8.0.0. The flaw is in chain state-machine logic and can only be remediated by running the patched binary. There is no application-level workaround. The vulnerability is in consensus logic; remediation requires the network to run the patched (v8.0.0) binary. The bonds module remains disabled in v8.0.0 and will only be re-enabled in a future release once the signer-authorization model has been corrected.21h CVE-2026-98037—

—

———In the Linux kernel, the following vulnerability has been resolved: bpf: Reject untrusted allocated-object pointers When the final RCU read-side critical section ends, a local kptr is demoted to PTR_UNTRUSTED but retains MEM_ALLOC. The pointer may be NULL or may refer to an object whose lifetime is no longer protected. type_is_ptr_alloc_obj() nevertheless recognizes any PTR_TO_BTF_ID with MEM_ALLOC as a live allocated object. In particular, a refcount-only local kptr never carries NON_OWN_REF, so it still passes the bpf_refcount_acquire() argument check after RCU protection ends. The kfunc can then dereference NULL or stale memory. Make type_is_ptr_alloc_obj() reject PTR_UNTRUSTED pointers. Since type_is_non_owning_ref() is based on the same predicate, graph kfunc arguments obey the same live-object requirement. Fault-protected reads of the demoted pointer remain valid: writes are already rejected, and read fixups use bpf_may_fault_on_deref() rather than this predicate. [ kkd: Rewrote commit log ]5h CVE-2026-97595—

—

———In the Linux kernel, the following vulnerability has been resolved: mac802154: fix use-after-free of sdata via queued RX frames The RX softirq producer ieee802154_subif_frame() queues received beacon and MAC-command frames onto local->rx_beacon_list / rx_mac_cmd_list and schedules a process-context worker, storing a raw mac_pkt->sdata (and skb->dev == sdata->dev) with neither a reference nor any locking: - the lists have no lock: the softirq producer list_add_tail()s while the mac_wq worker list_del()s, so sibling interfaces on the same phy corrupt the list; - the workers dereference the interface after it may have been freed. mac802154_rx_mac_cmd_worker() touches mac_pkt->sdata directly, and mac802154_rx_beacon_worker() -> mac802154_process_beacon() dereferences skb->dev (== sdata->dev). Removing an interface frees its sdata (netdev_priv) while a queued frame still points at it, so a later worker run is a use-after-free. Reproduced under KASAN by flooding a victim interface with MAC command frames and removing it (the beacon path is the same class via skb->dev): BUG: KASAN: slab-use-after-free in mac802154_rx_mac_cmd_worker+0x463/0x630 [mac802154] Read of size 4 at addr ffff888002f9ea18 by task kworker/u8:1/31 Workqueue: phy0-mac-cmds mac802154_rx_mac_cmd_worker [mac802154] Call Trace: mac802154_rx_mac_cmd_worker+0x463/0x630 [mac802154] process_one_work+0x611/0xe80 worker_thread+0x52e/0xdc0 kthread+0x30c/0x630 ret_from_fork+0x2fd/0x3e0 Fix both lists together: - add local->rx_lock and take it around every list access: the softirq producer (plain spin_lock, softirq context) and the workers and flush (spin_lock_bh, process context); - pin the interface for the lifetime of a queued frame with netdev_hold()/netdev_put(), so the worker can safely dereference sdata / skb->dev even while the interface is being removed; - dequeue under the lock at the head and loop-drain the whole list in the workers (they previously processed one frame per run and relied on a later enqueue to drain the rest); - drop not-yet-started frames of an interface before it is unregistered, from ieee802154_if_remove() (after the RCU grace period) and from the ieee802154_remove_interfaces() loop -- the latter is the whole-phy teardown path, which does not go through ieee802154_if_remove(). An in-flight worker that already dequeued a frame keeps its own netdev reference; unregister_netdevice() then waits it out in netdev_run_todo(), which runs at rtnl_unlock() (rtnl released) and after the interface has been closed, so it does not pin rtnl. A worker blocked in an association TX only delays that one interface's unregister (the usual "waiting for %s to become free"), it does not hold rtnl. netdev_hold() is used for this reason instead of a cancel_work_sync() under rtnl, which would block on the worker's unbounded MLME TX wait via ieee802154_sync_queue(). The mac-command worker additionally skips processing for a stopped interface (ieee802154_sdata_running()), avoiding a needless association response during teardown.5h CVE-2026-97594—

—

———In the Linux kernel, the following vulnerability has been resolved: landlock: Fix use-after-free of the source's parent directory current_check_refer_path() reads old_dentry->d_parent without holding a reference nor a lock on it, and then dereferences it in collect_domain_accesses() and in the audit record. A reference on a child does not pin its parent: __d_move() reassigns dentry->d_parent and drops the reference the child held on its former parent. hook_path_rename() is not affected because the rename path calls lock_rename() before the hook, so the source cannot be reparented under it. hook_path_link() has no such protection: filename_linkat() holds a reference on the source dentry but neither locks nor references its parent, so a concurrent rename(2) can reparent the source while security_path_link() runs, and the former parent can then be removed and freed while the hook walks it. A process can trigger this after entering a Landlock domain that handles at least one filesystem access right. The process can then race a linkat(2) loop against rename(2) and rmdir(2): BUG: KASAN: slab-use-after-free in collect_domain_accesses+0x278/0x290 Read of size 4 at addr ffff888160bd53f4 by task llrepro2/549 collect_domain_accesses+0x278/0x290 current_check_refer_path+0x952/0x1120 security_path_link+0x1be/0x320 filename_linkat+0x342/0x6d0 __x64_sys_linkat+0xfa/0x150 Freed by task 562: kmem_cache_free+0x139/0x4c0 i_callback+0x4b/0x80 rcu_core+0x7dc/0x10a0 Take a reference on the dentry selected as the source parent, using dget() for the common-mount-root case and dget_parent() otherwise. Release it after the hierarchy walk and synchronous audit logging. [mic: Clarify the caller, reachability, and reference handling]5h CVE-2026-97593—

—

———In the Linux kernel, the following vulnerability has been resolved: iommu/s390: Fix NULL dereference in iova_to_phys() with ZPCI_TABLE_TYPE_RFX When using a 5-level translation table via ZPCI_TABLE_TYPE_RFX get_rso_from_iova() returns NULL when the region-first entry is invalid. Yet in get_rto_from_iova() the region-second origin rso is not checked to be non-NULL before accessing rso[rsx] leading to a NULL pointer dereference instead of a NULL return when iova_to_phys() is called on a unmapped IOVA. Fix this by adding the missing NULL check.5h CVE-2026-842797.2 HIG

—

———The Fancy Product Designer plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'output_format' parameter in all versions up to, and including, 6.5.2 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This requires the Pro Export/Genius feature to be enabled on the site, as the vulnerable fpd_pr_export AJAX action is only registered when that feature is active.9h CVE-2026-835917.2 HIG

—

———The AMP for WP – Accelerated Mobile Pages plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Comment Content via Regex Transformation in all versions up to, and including, 1.1.16 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The crafted payload uses only WordPress-permitted comment tags and attributes (an anchor with href and title), and the AMP sanitizer pipeline omits javascript: protocol blocking, meaning neither the comment save filter nor the AMP output stage removes the malicious URI introduced by the transformation.9h CVE-2026-911196.4 MED

—

———Discourse is an open-source discussion platform. Prior to 2026.1.8, 2026.6.3, 2026.7.2, and 2026.8.0, the topic small-action and nested-activity-log components interpolated the free-form action_code_who value into mention-link href attributes without URL encoding. A quote-bearing display name could terminate the intended URL attribute and inject attacker-controlled elements into the trusted rendered markup. Although the visible mention text was escaped, the unencoded path component allowed stored HTML injection when another user viewed the affected topic action or activity log. This issue is fixed in versions 2026.1.8, 2026.6.3, 2026.7.2, and 2026.8.0.22h CVE-2026-850578.7 HIG

—

———ZITADEL is an open source identity management platform. From 3.0.0 until 3.4.13 and 4.16.1, ZITADEL Actions V1 enables the goja Node-compatible require() registry without restricting its filesystem source loader. An organization Action author with ORG_OWNER, org.action.write, and org.flow.write permissions can run JavaScript at OIDC, SAML, and login-flow trigger points and load files readable by the ZITADEL server process. This can disclose mounted configuration and secrets, including credentials stored through ZITADEL_FIRSTINSTANCE_LOGINCLIENTPATPATH or ZITADEL_FIRSTINSTANCE_MACHINEKEYPATH, and recovered bootstrap credentials can enable escalation from an organization administrator to an instance administrator. The issue affects Actions V1, and host command execution is not established. This issue is fixed in versions 3.4.13 and 4.16.1.22h CVE-2026-78397—

—

———The Link Library WordPress plugin before 7.9.6 does not validate the destination of a user-supplied URL before falling back to an unprotected fetch when its safe request is rejected, allowing unauthenticated visitors to make the site issue requests to hosts on its internal network and to learn from the response whether an internal service answered. Versions below 7.8.8 are covered by CVE-2025-68600; this entry covers 7.8.8 through 7.9.5, where that fix was incomplete. Exploitation requires the site owner to have published the Link Library WordPress plugin before 7.9.6's public link submission form with reciprocal-link validation enabled.9h CVE-2026-97592—

—

———In the Linux kernel, the following vulnerability has been resolved: s390/crypto: Fix missing scrub of temp buffers with AES ctr and gcm algorithm In function ctr_aes_crypt() there is a buffer used to process remaining bytes < AES_BLOCK_SIZE. This buffer was not scrubbed and thus could lead to expose of unwanted data. When the buffer is used explicitly scrub it at the end of the code block to avoid exposure of maybe sensitive data. In a similar way the function gcm_aes_crypt() hat an error path where the CPACF param block was not scrubbed. Instead of return early now these error paths go to end of function where explicit scrubbing is done. Similar with the buffers which are part of the gcm_sg_walk structs from the variables gw_in and gw_out.5h CVE-2026-97591—

—

———In the Linux kernel, the following vulnerability has been resolved: s390/crypto: Fix handling of EBUSY in PHMAC when req is pushed to crypto engine When a request is transferred to the engine via crypto_transfer_hash_request_to_engine() there are two return codes signaling a successful transfer: EINPROGRESS and EBUSY. However the correct handling of EBUSY was missing and has been added as a return code indicating a successful transfer to the crypto engine.5h CVE-2026-98038—

—

———In the Linux kernel, the following vulnerability has been resolved: bpf: Keep refcount_acquire nullable for borrowed RCU kptrs bpf_refcount_acquire() is fallible for a borrowed reference because the object may have reached a zero refcount. The verifier therefore keeps KF_RET_NULL on the return value unless the argument is an owning reference. An RCU-protected load of a local kptr is marked MEM_ALLOC, but it only receives NON_OWN_REF when the pointee contains a graph node. A refcounted object without a graph node consequently looks like an owning reference even though the loaded register has no acquired reference state. If the program drops the last real reference while remaining in the RCU critical section, refcount_inc_not_zero() returns NULL while the verifier treats the result as non-NULL. Only classify the argument as owning when it is backed by a verifier-tracked reference. This retains the non-NULL return for pointers from bpf_obj_new(), bpf_kptr_xchg(), or an earlier successful acquisition, while requiring a NULL check for borrowed RCU kptrs. [ kkd: Rewrote commit log ]5h CVE-2026-98039—

—

———In the Linux kernel, the following vulnerability has been resolved: bpf: Require MEM_PERCPU for percpu kptr stores map_kptr_match_type() treats perm_flags as the set of register type flags that a kptr field permits. Adding MEM_PERCPU to that set for BPF_KPTR_PERCPU does not require the source register to carry it, however. The subset test consequently accepts both a plain bpf_obj_new() allocation and a referenced kernel pointer into a __percpu_kptr map field. Loads from the field are always marked MEM_PERCPU. Consumers then treat the stored value as the cookie returned by bpf_percpu_obj_new(): per-CPU pointer helpers relocate it, and map teardown selects the per-CPU free path. A plain allocation can therefore provide an arbitrary kernel read/write, while a kernel pointer can be relocated into an invalid address or sent through a missing destructor. Require the source MEM_PERCPU flag to match the destination field kind. This preserves valid bpf_percpu_obj_new() stores and rejects both the program-BTF and kernel-BTF variants.5h CVE-2026-98040—

—

———In the Linux kernel, the following vulnerability has been resolved: bpf: Mark the zero register precise for a register-form NULL check check_cond_jmp_op() accepts "if rA <op> rB" as a NULL check for a nullable pointer rA when rB is a scalar known to be zero, lifts PTR_MAYBE_NULL from rA in the corresponding branch and does not mark rB precise. Consider the following program: r0 = bpf_get_prandom_u32(); r6 = 1; /* the r6 == 0 path is explored first */ if (r0 == 0) goto 1f; r6 = 0; 1: r0 = bpf_map_lookup_elem(map, &0); /* absent, NULL at runtime */ if (r0 == r6) goto 2f; /* taken as a NULL check for r0 */ *(u8 *)(r0 + 0); /* verifier: map value; runtime: zero */ 2: return 0; The r6 == 0 path is explored first and the dereference is accepted. The r6 == 1 path is pruned at the checkpoint recorded for (1), so the comparison is never verified with a non-zero r6. At runtime a failed lookup returns NULL, NULL != 1 takes the non-NULL edge and the program dereferences a pointer that is zero.5h CVE-2026-97590—

—

———In the Linux kernel, the following vulnerability has been resolved: s390/crypto: Fix missing scrub of temp buffers with PAES algorithm In function ctr_paes_do_crypt() there is a buffer used to process remaining bytes < AES_BLOCK_SIZE. This buffer was not scrubbed and thus could lead to expose of unwanted data. Rework the code to explicitly scrub the buffer at the end of the function to avoid exposure of maybe sensitive data. In function __xts_2keys_prep_param() change the existing scrub to clean the whole param block instead of just the key field.5h CVE-2026-98041—

—

———In the Linux kernel, the following vulnerability has been resolved: bpf: Don't predict JMP32 pointer vs zero comparisons Consider the following program: r1 = map_value; /* low 32 bits are zero at runtime */ r6 = 0xdead000000000000; if w1 != 0 goto l1; l0: r1 += r6; r2 = *(u64 *)(r1 + 0); exit; l1: r6 = 0; goto l0; At the moment is_branch_taken() reports the jump as always taken, because it does not distinguish between BPF_JMP and BPF_JMP32 comparisons when processing 'if w1 != 0 ...'.5h CVE-2026-98042—

—

———In the Linux kernel, the following vulnerability has been resolved: bpf: Don't resurrect a scalar id dropped by collect_linked_regs() check_cond_jmp_op() copies the compared registers into env->{false,true}_reg{1,2} before collect_linked_regs() runs and copies those snapshots back into both branch states afterwards. collect_linked_regs() records at most LINKED_REGS_MAX members of a linked registers group in the jump history and calls clear_scalar_id() for every member that does not fit. The compared register is not exempt from that. As a consequence, sync_linked_regs() might adjust ranges for more registers than bpf_bt_sync_linked_regs() can propagate precision to. Collect the linked registers before the snapshots are taken instead. This might lead to some unnecessary clear_scalar_id's, but from previous testing situations with many linked registers are extremely rare.5h CVE-2026-95811—

—

———Lemonldap::NG::Handler versions from 2.0.0 before 2.16.10, from 2.17.0 before 2.21.6, from 2.22.0 before 2.23.4 for Perl allow an equivalent spelling of a path to bypass the locationRules that restrict it. The handler matches each vhost's locationRules regular expressions against REQUEST_URI, the raw request line, while the web server routes on the path it has already percent-decoded and normalized. A request that percent-encodes a character of the path, inserts dot segments, or doubles a slash therefore reaches the protected resource under a URI that no rule regexp matches, and the vhost's default rule decides access. Deny rules, identity and group conditions, and unprotect and skip rules are bypassed alike. Only a vhost whose default rule is more permissive than its other rules is affected. An authenticated user then reaches any URL a locationRules regexp was meant to restrict, but gains no more than that default rule already grants.14h CVE-2026-927138.1 HIG

—

———The Modula Image Gallery – Photo Grid & Video Gallery plugin for WordPress is vulnerable to arbitrary file deletion due to insufficient file path validation in the upload_image function in all versions up to, and including, 3.0.2. This makes it possible for authenticated attackers, with author-level access and above, to delete arbitrary files on the server. The path restriction to wp-content/uploads is not an effective ownership boundary, as all user attachment files reside within that tree, and Authors trivially satisfy the edit_post check on their own galleries.8h CVE-2026-98043—

—

———In the Linux kernel, the following vulnerability has been resolved: bpf: Don't infer non-NULL from a pointer with an unbounded offset reg_not_null() decides that a register holds a non-NULL value by looking at its type alone. For pointer types that allow arithmetic the type only guarantees a non-NULL base, in case of an unbound offset the runtime offset value might still add up to NULL. Consider the followng program: r6 = bpf_map_lookup_elem(map, &0); /* present */ if (r6 == 0) return 0; r7 = bpf_map_lookup_elem(map, &1); /* absent, NULL at runtime */ r8 = r7; r8 -= r6; /* pointer - pointer: unknown scalar, -r6 */ r8 <<= 1; r8 >>= 1; /* any non-negative offset is accepted by */ /* check_reg_sane_offset_ptr() */ r6 += r8; /* verifier: map value; runtime: zero */ if (r7 != r6) return 0; *(u8 *)(r7 + 0); /* r7 is inferred non-NULL, both are zero */ At runtime both registers are zero, the comparison is true and the load faults with NULL pointer dereference. Require the offset to be within +-BPF_MAX_VAR_OFF in reg_not_null().5h CVE-2026-98044—

—

———In the Linux kernel, the following vulnerability has been resolved: bpf: Reject legacy packet loads from callbacks check_ld_abs() models a failed BPF_LD_ABS or BPF_LD_IND in a subprogram as an implicit return with R0 set to zero. It calls prepare_func_exit() to explore this synthesized path. When the load is reached directly from a synchronous callback, prepare_func_exit() enforces the callback return contract and marks R0 precise. R0 is not derived from a real instruction on this path, so precision backtracking reaches the callback call with R0 still requested and triggers the "callback unexpected regs" verifier bug. A privileged program loader can therefore cause a verifier warning and an -EFAULT BPF_PROG_LOAD. These legacy packet-load instructions are deprecated. Reject them from callbacks rather than complicating their implicit-return model. Check all active frames before constructing the implicit return so nested static subprograms cannot hide the callback context. Global functions are verified independently with a fresh frame zero, so an active-frame check cannot identify a global function called from a callback. Also check the complete subprogram call graph during stack-depth validation and reject a function containing a legacy load when any caller is a callback. This covers global and static descendants without making has_ld_abs transitive, preserving its per-function BTF return-type check. Ordinary uses outside callbacks remain supported.5h CVE-2026-97589—

—

———In the Linux kernel, the following vulnerability has been resolved: s390/crypto: Fix wrong return code to engine in asynch callbacks When crypto_finalize_hash_request() or crypto_finalize_skcipher_request() explicitly completes a request, the do_one_request callback must return 0 to indicate successful handling. Returning a negative error code causes the crypto engine to assume the driver failed to take ownership and triggers a second completion via crypto_request_complete(), resulting in a double completion. This pattern occurs in paes_s390.c 4 times and once in phmac_s390.c. Fixed in phmac_do_one_request() and all four paes do_one_request callbacks (ecb, cbc, ctr, xts) by returning 0 after explicit finalization instead of propagating the error code.5h CVE-2026-97588—

—

———In the Linux kernel, the following vulnerability has been resolved: s390/crypto: Map EBUSY to EIO when key conversion fails repeatedly When hardware persistently returns -EBUSY after exhausting retries, the error propagates to crypto_finalize_*_request(). The crypto API's completion wrapper treats -EBUSY as a queueing status and swallows it, preventing the completion callback from firing. This causes callers using crypto_wait_req() to block indefinitely. Translate persistent -EBUSY to -EIO after retry exhaustion to ensure proper error propagation and callback invocation.5h CVE-2026-98045—

—

———In the Linux kernel, the following vulnerability has been resolved: bpf: Mark faultable stack helpers as sleepable The faultable variants of bpf_get_stack() and bpf_get_task_stack() pass may_fault=true into the common stack collection code. Resolving user-space build IDs may then call build_id_parse_file() and block on filesystem reads. Neither helper prototype sets might_sleep. Since prototype selection uses the sleepability of the whole program, the verifier can still allow these helpers from a non-sleepable region within that program, such as an explicit RCU or preemption-disabled region. The task-stack helper can also be called from a non-sleepable timer callback of a sleepable program. Mark both faultable prototypes as sleepable. The existing helper context check then rejects these calls while continuing to allow them in genuinely sleepable contexts.5h CVE-2026-97587—

—

———In the Linux kernel, the following vulnerability has been resolved: perf: RISC-V: store available counter mask as bitmap The available-counter mask was a single unsigned long, but iteration uses RISCV_MAX_COUNTERS, which is 64. On RV32 that reads past the object. Filling with an unsigned-long bit at index 32 and above is also wrong. Use DECLARE_BITMAP and set_bit/bitmap helpers. Walk each bitmap word into CFG_MATCH when checking events, when allocating an index, and when stopping all counters. Set the counter base to i times BITS_PER_LONG. Share the CFG_MATCH ecall through a small helper so the 32-bit argument split is not duplicated. On qemu-system-riscv32 the probe bitmap has bits above XLEN set, so the first word alone is not enough. [pjw@kernel.org: updated to apply; fixed checkpatch.pl issues]5h CVE-2026-97586—

—

———In the Linux kernel, the following vulnerability has been resolved: afs: Fix missing kunmap in afs_dir_search_bucket() Fix afs_dir_search_bucket() to kunmap the block it's using in the "bad:" path.5h CVE-2026-97585—

—

———In the Linux kernel, the following vulnerability has been resolved: afs: Fix double-unmap of directory block Fix afs_edit_dir_remove() to use a cleanup function to unmap the block pointed to by afs_dir_iter::block if it's left pointing to something rather than manually kunmapping the blocks. Manually kunmapping without clearing iter.blocks can result in a double-kunmap if afs_dir_find_block() is called twice in a row (which would be the case if the block being modified is not first in the hash chain).5h CVE-2026-97584—

—

———In the Linux kernel, the following vulnerability has been resolved: afs: Fix incorrect free in candidate cleanup in afs_lookup_server() Fix afs_lookup_server() to not free an existing server's endpoint state when cleaning up a candidate server. The candidate record doesn't have an endpoint state yet at this point, so the free for that can just be removed.5h CVE-2026-78394—

—

———The Link Library WordPress plugin before 7.9.6 does not sanitize a user-supplied destination folder before writing a generated image to disk, allowing users with the Contributor role and above to create directories and write or overwrite image files anywhere the web server can write, including outside the site's document root. The written file name is always numeric with a fixed image extension, so executable code cannot be planted this way.9h CVE-2026-97583—

—

———In the Linux kernel, the following vulnerability has been resolved: afs: Clear stale peer app data after address list changes afs_fs_probe_fileserver() fetches the current endpoint state under server->fs_lock, but leaves old_alist as NULL. Consequently, afs_set_peer_appdata() treats every address list replacement as initial setup and only binds the new peers; it never unbinds peers removed from the old list. An address refresh can therefore proceed as follows. CPU 0 replaces server S's list and drops Pold without clearing Pold->app_data. The server destroyer then clears only S's current peers and lets S reach its RCU callback. After the callback frees S, CPU 1 handles a callback through an RxRPC connection that still pins Pold, reads Pold->app_data, and calls afs_use_server() on the freed object. KASAN reported: BUG: KASAN: slab-use-after-free in afs_find_server+0x3c/0xa0 Read of size 4 at addr ffff8881013e1af0 by task krxrpcio/7001/74 Call Trace: afs_find_server+0x3c/0xa0 afs_rx_new_call+0x15c/0x390 rxrpc_new_incoming_call+0x97c/0x1730 rxrpc_input_packet.constprop.0+0xd03/0xec0 rxrpc_io_thread+0x967/0x1640 Allocated by task 93: afs_lookup_server+0x1a7/0x14c0 afs_alloc_server_list+0x43f/0xb60 afs_create_volume+0x923/0x1490 afs_get_tree+0x1c6/0x10a0 Freed by task 0: kfree+0x131/0x3c0 rcu_core+0x50a/0x1850 Last potentially related work creation: __call_rcu_common.constprop.0+0x71/0xa10 afs_put_server+0x213/0x2b0 Preserve old->addresses for the peer app-data update so that removed peers are cleared before the endpoint state is replaced. Also advance both cursors when the old and new lists share a peer; activating the old/new comparison without this would otherwise loop forever on the shared entry.5h CVE-2026-98046—

—

———In the Linux kernel, the following vulnerability has been resolved: bpf: Mark bpf_btf_find_by_name_kind() as sleepable When bpf_btf_find_by_name_kind() finds a type in module BTF, it returns a new BTF object fd through __btf_new_fd(). This reaches anon_inode_getfd(), which can sleep while allocating or expanding the current task fd table. The helper prototype does not set might_sleep, so the verifier allows the helper in non-sleepable contexts such as BPF timer callbacks. The fd allocation can then sleep in softirq context and install the fd into the interrupted task. Mark the helper as sleepable. This preserves calls from the main body of a sleepable syscall program while rejecting calls from its non-sleepable regions.5h CVE-2026-97582—

—

———In the Linux kernel, the following vulnerability has been resolved: hwmon: (gpio-fan) Fix use-after-free in alarm work fan_alarm_irq_handler() queues fan_data->alarm_work, but nothing cancels it. fan_alarm_notify() dereferences fan_data and its hwmon device. On unbind, devres frees the interrupt, which only waits for the handler itself, and then releases the hwmon device and fan_data, so a pending fan_alarm_notify() can run after those frees. Replace INIT_WORK() with devm_work_autocancel(), registered before devm_request_irq(). The devres cleanup then frees the interrupt first, so no new work can be queued, and cancels the work while fan_data and the hwmon device are still alive. This issue was found by an in-house static analysis tool.5h CVE-2026-936547.2 HIG

—

———The Premium Packages – Sell Digital Products Securely plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'cart_items[][product_name]' Parameter in all versions up to, and including, 7.2.1 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The checkout REST route uses permission_callback set to __return_true and the invoice loader performs no order ownership check, meaning an unauthenticated attacker can both persist the payload and ensure it is renderable to any logged-in user who accesses the invoice.5h