CVE Watch402,574 in full archive

Vulnerabilities exploitable today

402,574in current view

Single score combining CVSS, KEV membership and EPSS. Every CVE with its own record — timeline from publication to active exploitation.

In KEV catalog1,756

New KEV · 24H0

Exploit Today ≥ 701,689

Distribution · last window

Critical
4,727
High
18,790
Medium
17,140
Low
1,727

Filters

Window

Severity

Flags

Vulnerabilities386,681–386,720 · 402,574

CVECVSSEPSSKEVRExploitTitleMod.

——1——CVE-2026-683947.8 HIG

2.2%

——1In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: revalidate LOAD_CONN_PARAM queued update MGMT_OP_LOAD_CONN_PARAM queues conn_update_sync() when a single parameter update changes an existing LE central connection. The queued work currently stores a borrowed hci_conn_params entry from hdev->le_conn_params. A later LOAD_CONN_PARAM request can clear disabled parameters and free that entry before hci_cmd_sync_work() runs the queued callback. Do not keep the borrowed hci_conn_params pointer in queued work. Queue the hci_conn instead and hold a reference until the queued callback completes. When the work runs, revalidate that the connection is still present, look up the current hci_conn_params entry, and cancel the update if userspace removed that entry while the work was pending. Copy the interval values from the current params entry under hdev->lock, then drop the lock and keep using hci_le_conn_update_sync() to issue the update. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in conn_update_sync+0x2a/0xf0 [bluetooth] Read of size 1 at addr ffff88810c697126 by task kworker/u17:0/377 Workqueue: hci0 hci_cmd_sync_work [bluetooth] Call Trace: <TASK> dump_stack_lvl+0x66/0xa0 print_report+0xce/0x5f0 kasan_report+0xe0/0x110 conn_update_sync+0x2a/0xf0 [bluetooth] hci_cmd_sync_work+0x187/0x210 [bluetooth] process_one_work+0x4fd/0xbc0 worker_thread+0x2d8/0x570 kthread+0x1ad/0x1f0 ret_from_fork+0x3c9/0x540 ret_from_fork_asm+0x1a/0x30 Allocated by task 466: hci_conn_params_add+0xa6/0x240 [bluetooth] load_conn_param+0x4e1/0x850 [bluetooth] hci_sock_sendmsg+0x96b/0xf80 [bluetooth] Freed by task 474: kfree+0x313/0x590 hci_conn_params_clear_disabled+0x9b/0xc0 [bluetooth] load_conn_param+0x4bf/0x850 [bluetooth] hci_sock_sendmsg+0x96b/0xf80 [bluetooth]6d CVE-2026-925107.8 HIG

2.2%

——1In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix potential use after free in ib_destroy_srq_user() When accessing a SRQ via the netlink path the only synchronization mechanism for the said SRQ is rdma_restrack_get(). Currently, rdma_restrack_del() is invoked at the end of ib_destroy_srq_user(), which is too late, since by that point vendor-specific resources associated with the SRQ might already be freed. This can leave a short window where the SRQ remains accessible through restrack, leading to a potential use-after-free. Fix this by moving the rdma_restrack_begin_del() call to the start of ib_destroy_srq_user(), ensuring that the SRQ is removed from restrack before its internal resources are released. This guarantees that no new users hold references to a SRQ that is in the process of destruction. In addition, this change preserves the intended inverted order between create and destroy routines: resources are added to restrack at the end of successful creation, and hence shall be removed from the restrack first thing during the destruction flow, which keeps the lifecycle management consistent and predictable.7d CVE-2026-532308.7 HIG

2.2%

——1In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list mlx5_query_nic_vport_mac_list() sizes its firmware command buffer using the PF's log_max_current_uc/mc_list capabilities. When querying a VF vport with a larger configured max (via devlink), the firmware response can overflow this buffer: BUG: KASAN: slab-out-of-bounds in mlx5_query_nic_vport_mac_list+0x453/0x4c0 [mlx5_core] Read of size 4 at addr ff1100013ffc8a12 by task kworker/u96:2/385 CPU: 12 UID: 0 PID: 385 Comm: kworker/u96:2 Not tainted 7.0.0-rc6+ #1 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009) Workqueue: mlx5_esw_wq esw_vport_change_handler [mlx5_core] Call Trace: <TASK> dump_stack_lvl+0x69/0xa0 print_report+0x176/0x4e4 kasan_report+0xc8/0x100 mlx5_query_nic_vport_mac_list+0x453/0x4c0 [mlx5_core] esw_update_vport_addr_list+0x2e3/0xda0 [mlx5_core] esw_vport_change_handle_locked+0xa1f/0x1060 [mlx5_core] esw_vport_change_handler+0x6a/0x90 [mlx5_core] process_one_work+0x87f/0x15e0 worker_thread+0x62b/0x1020 kthread+0x375/0x490 ret_from_fork+0x4dc/0x810 ret_from_fork_asm+0x11/0x20 </TASK> Fix by querying the vport's own HCA caps to size the buffer correctly. Refactor the function to allocate and return the MAC list internally, removing the caller's dependency on knowing the correct max.6d CVE-2025-210445.7 MED

2.2%

——1Out-of-bounds write in fingerprint trustlet prior to SMR Oct-2025 Release 1 allows local privileged attackers to write out-of-bounds memory.18d CVE-2023-20917—

2.2%

——1——CVE-2026-640177.8 HIG

2.2%

——1In the Linux kernel, the following vulnerability has been resolved: blk-mq: pop cached request if it is usable When submitting a bio to blk-mq, if the task should sleep after peeking a cached request, but before it pops it, the plug flushes and calls blk_mq_free_plug_rqs, freeing the cached_rqs. This creates a use-after-free bug. Fix this by popping the cached request before any possible blocking calls if it is suitable for use. Popping this request first holds a queue reference, so avoid any serialization races with queue freezes and can safely proceed with dispatching that request to the driver. This potentially increases a timing window from when a driver wants to freeze its queue to when requests stop being dispatched. That scenario is off the fast path though, and drivers need to appropriately handle requests during a freeze request anyway. The downside is the popped element needs to be individually freed when we performed a bio plug merge. The cached request would have had to be freed later anyway, but this patch does it inline with building the plug list instead of after flushing it.6d CVE-2026-743597.8 HIG

2.2%

——1In the Linux kernel, the following vulnerability has been resolved: configfs_lookup(): don't leave ->s_dentry dangling on failure Normally ->s_dentry is cleared when dentry it's pointing to becomes negative (on eviction, realistically). However, that only happens if dentry gets to be positive in the first place; in case of inode allocation failure dentry never becomes positive, so ->d_iput() is not called at all. We do part of what normally would've been done by configfs_d_iput() (dropping the reference to configfs_dirent) manually, but we do not clear ->s_dentry there. Sloppy as it is, it does not matter in case of configfs_create_{dir,link}() - there configfs_dirent does not survive dropping the sole reference to it. However, for configfs_lookup() it *does* survive, with a dangling pointer to soon to be freed dentry sitting it its ->s_dentry. Subsequent getdents(2) in that directory will end up dereferencing that pointer in order to pick the inode number. Use after free... This is the minimal fix; the right approach is to set the linkage between dentry and configfs_dirent only after we know that we have an inode, but that takes more surgery and the bug had been there since 2006, so...9d CVE-2026-746137.8 HIG

2.2%

——1In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: avoid refilling the RX queue after teardown Commit b917507e5ad9 ("vsock/virtio: stop workers during the .remove()") made the RX worker jump to its common exit when rx_run is clear. That exit still refills the RX queue when the buffer count is low, so work queued across virtio_vsock_vqs_del() can add buffers after the virtqueues have been deleted. BUG: KASAN: slab-use-after-free in virtqueue_add_sgs Read of size 4 by task kworker/0:1 Workqueue: virtio_vsock virtio_transport_rx_work Call Trace: virtqueue_add_sgs (drivers/virtio/virtio_ring.c:2796) virtio_vsock_rx_fill (net/vmw_vsock/virtio_transport.c:332) virtio_transport_rx_work (net/vmw_vsock/virtio_transport.c:701) process_one_work (kernel/workqueue.c:3314) worker_thread (kernel/workqueue.c:3478) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) ... Freed by task 141: kfree (mm/slub.c:6566) vp_del_vq (drivers/virtio/virtio_pci_common.c:259) vp_del_vqs (drivers/virtio/virtio_pci_common.c:285) virtio_vsock_freeze (net/vmw_vsock/virtio_transport.c:912) virtio_device_freeze (drivers/virtio/virtio.c:658) virtio_pci_freeze (drivers/virtio/virtio_pci_common.c:601) pci_pm_freeze (drivers/pci/pci-driver.c:1098) device_suspend (drivers/base/power/main.c:1968) Kernel panic - not syncing: KASAN: panic_on_warn set ... Jump to a no-refill exit when rx_run is clear, leaving the normal exit to replenish a running queue.9d CVE-2026-79403—

2.2%

——1An issue in Kilo Code before v7.4.1 allows a local attacker to execute arbitrary code via the permission/allow-everything endpoint26d CVE-2026-745127.8 HIG

2.2%

——1In the Linux kernel, the following vulnerability has been resolved: audit: fix potential use-after-free in audit_del_rule() `audit_del_rule()` destroys `e->rule.exe` via `audit_remove_mark_rule()` before unlinking the rule from RCU-visible filter lists and waiting for a grace period. Concurrent readers in `audit_filter()` and `audit_filter_rules()` still dereference `e->rule.exe`, while the fsnotify mark can be freed on an independent lifetime path. This creates a use-after-free window during rule deletion. Fix this by unlinking the rule from the RCU-visible lists and invoking `synchronize_rcu()` before calling `audit_remove_mark_rule()` (and other rule removal helpers). This ensures that all existing RCU readers have exited the critical section before any underlying resources are destroyed.9d CVE-2026-643447.8 HIG

2.2%

——1In the Linux kernel, the following vulnerability has been resolved: USB: idmouse: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked")53d CVE-2026-315007.8 HIG

2.2%

——1In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: serialize btintel_hw_error() with hci_req_sync_lock btintel_hw_error() issues two __hci_cmd_sync() calls (HCI_OP_RESET and Intel exception-info retrieval) without holding hci_req_sync_lock(). This lets it race against hci_dev_do_close() -> btintel_shutdown_combined(), which also runs __hci_cmd_sync() under the same lock. When both paths manipulate hdev->req_status/req_rsp concurrently, the close path may free the response skb first, and the still-running hw_error path hits a slab-use-after-free in kfree_skb(). Wrap the whole recovery sequence in hci_req_sync_lock/unlock so it is serialized with every other synchronous HCI command issuer. Below is the data race report and the kasan report: BUG: data-race in __hci_cmd_sync_sk / btintel_shutdown_combined read of hdev->req_rsp at net/bluetooth/hci_sync.c:199 by task kworker/u17:1/83: __hci_cmd_sync_sk+0x12f2/0x1c30 net/bluetooth/hci_sync.c:200 __hci_cmd_sync+0x55/0x80 net/bluetooth/hci_sync.c:223 btintel_hw_error+0x114/0x670 drivers/bluetooth/btintel.c:254 hci_error_reset+0x348/0xa30 net/bluetooth/hci_core.c:1030 write/free by task ioctl/22580: btintel_shutdown_combined+0xd0/0x360 drivers/bluetooth/btintel.c:3648 hci_dev_close_sync+0x9ae/0x2c10 net/bluetooth/hci_sync.c:5246 hci_dev_do_close+0x232/0x460 net/bluetooth/hci_core.c:526 BUG: KASAN: slab-use-after-free in sk_skb_reason_drop+0x43/0x380 net/core/skbuff.c:1202 Read of size 4 at addr ffff888144a738dc by task kworker/u17:1/83: __hci_cmd_sync_sk+0x12f2/0x1c30 net/bluetooth/hci_sync.c:200 __hci_cmd_sync+0x55/0x80 net/bluetooth/hci_sync.c:223 btintel_hw_error+0x186/0x670 drivers/bluetooth/btintel.c:26011d CVE-2026-912085.1 MED

2.2%

——1Vulnerability in the Oracle Solaris product of Oracle Systems (component: Services). The supported version that is affected is 11.4. Difficult to exploit vulnerability allows unauthenticated attacker with logon to the infrastructure where Oracle Solaris executes to compromise Oracle Solaris. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Solaris. CVSS 3.1 Base Score 5.1 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H).4d CVE-2026-643407.8 HIG

2.2%

——1In the Linux kernel, the following vulnerability has been resolved: USB: legousbtower: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked")53d CVE-2026-744827.8 HIG

2.2%

——1In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: unlock i_mmap_rwsem before releasing after-split folios __folio_split() keeps dereferencing the mapping after the split: shmem_uncharge(mapping->host) and remap_page() while the folios are still frozen/locked, and i_mmap_unlock_read(mapping) at the very end, after the after-split folios have been unlocked and freed. Nothing holds an inode reference across that. The split relies on @folio -- which the beyond-EOF drop loop never removes, as it starts at folio_next(folio) -- staying locked and in the page cache to hold off eviction. But the unlock loop unlocks @folio before i_mmap_unlock_read() runs. If the caller's @lock_at is a tail beyond EOF, as memory_failure() passes when splitting a poisoned tail of a shmem THP that reaches past i_size during truncation, it too is gone from the page cache; so once @folio is unlocked no locked, in-cache folio pins the inode, and a concurrent final iput() can evict and RCU-free it before i_mmap_unlock_read() touches i_mmap_rwsem: BUG: KASAN: slab-use-after-free in __up_read+0x634/0x790 i_mmap_unlock_read include/linux/fs.h:537 [inline] __folio_split+0x732/0x1640 mm/huge_memory.c:4100 try_to_split_thp_page+0xab/0x390 mm/memory-failure.c:1675 memory_failure+0x1394/0x26e0 mm/memory-failure.c:2470 Freed by task 4601: shmem_free_in_core_inode+0x54/0xb0 mm/shmem.c:5177 evict+0x57f/0xac0 fs/inode.c:870 Do every mapping dereference while @folio still pins the inode: drop i_mmap_rwsem right after remap_page(), before the loop that unlocks and frees the after-split folios, and clear @mapping so the exit path does not unlock it again. shmem_uncharge() and remap_page() already run before that point, so after this nothing past the unlock loop touches the inode or the mapping. This is now a rule the split depends on, alongside keeping @folio frozen until the page cache is updated: no inode or mapping dereference once the after-split folios start being unlocked.9d CVE-2026-746607.8 HIG

2.2%

——1In the Linux kernel, the following vulnerability has been resolved: netfilter: ebt_nflog: pin the NFLOG backend nf_log_unregister() runs after the per-net teardown so its final RCU grace period also drains readers that obtained the logger from a per-net binding. However, ebt_nflog passes an explicit ULOG log type to nf_log_packet() without holding a reference on the selected logger module, unlike the xt_NFLOG and nft_log frontends. An ebtables nflog rule can therefore remain callable while nfnetlink_log is unloaded. The resulting interleaving is: CPU 0 CPU 1 nfnetlink_log_fini() unregister_pernet_subsys() kfree(nfnl_log_pernet(net)) ebt_nflog_tg() nf_log_packet() nfulnl_log_packet() instance_lookup_get_rcu() The global ULOG logger is still registered at this point, so CPU 1 dereferences the per-net state after CPU 0 has freed it. KASAN reported: BUG: KASAN: slab-use-after-free in instance_lookup_get_rcu Read of size 8 at addr ff110001052e6210 by task poc/92 Call Trace: instance_lookup_get_rcu+0x1ce/0x1f0 [nfnetlink_log] nfulnl_log_packet+0x248/0x2fb0 [nfnetlink_log] nf_log_packet+0x204/0x300 ebt_nflog_tg+0x351/0x550 ebt_do_table+0xedf/0x22b0 Allocated by task 90: __kmalloc_noprof+0x186/0x470 ops_init+0x6d/0x420 register_pernet_operations+0x2f6/0x670 register_pernet_subsys+0x23/0x40 Freed by task 93: kfree+0x131/0x3c0 ops_undo_list+0x3e3/0x700 unregister_pernet_operations+0x232/0x490 unregister_pernet_subsys+0x1c/0x30 nfnetlink_log_fini+0x34/0x450 [nfnetlink_log] Acquire the ULOG logger module reference when an ebt_nflog rule is validated and release it when the rule is destroyed. Request the NFLOG backend for legacy callers when needed, matching xt_NFLOG. This prevents module teardown until all ebt_nflog rules have stopped using the logger.9d CVE-2026-743138.8 HIG

2.2%

——1In the Linux kernel, the following vulnerability has been resolved: vduse: hold vduse_lock across IDR lookup in open path vduse_dev_open() looks up struct vduse_dev through the IDR and then acquires dev->lock only after vduse_lock has been dropped. This leaves a window where a concurrent VDUSE_DESTROY_DEV can remove the same object from the IDR and free it before the open path locks the device, leading to a use-after-free. Close this race by keeping vduse_lock held until dev->lock has been acquired in the open path, matching the lock ordering already used by the destroy path.9d CVE-2026-643627.8 HIG

2.2%

——1In the Linux kernel, the following vulnerability has been resolved: HID: lg-g15: cancel pending work on remove to fix a use-after-free lg_g15_data is allocated with devm and holds a work item. The report handlers schedule that work straight from device input. lg_g15_event() and lg_g15_v2_event() do it on the backlight cycle key, and lg_g510_leds_event() does it too. The worker dereferences the lg_g15_data back through container_of. The driver had no remove callback and never cancelled the work. So if a report scheduled the work and the keyboard was then unplugged, devres freed lg_g15_data while the work was still pending or running, and the worker touched freed memory. This is a use-after-free. It is reachable as a race on device unplug. Add a remove callback that cancels the work before devres frees the state. g15->work is only initialized for the models that schedule it (G15, G15 v2, G510). The G13 and Z-10 leave it zeroed, so guard the cancel on g15->work.func to avoid cancelling a work that was never set up. The g15 NULL test mirrors the one already in lg_g15_raw_event().52d CVE-2026-746567.8 HIG

2.2%

——1In the Linux kernel, the following vulnerability has been resolved: ipv4: fix use-after-free in fib_nhc_update_mtu() fib_nhc_update_mtu() walks the nexthop exception table under RTNL, but RTNL does not serialize this walk with PMTU exception updates. The walk uses rcu_dereference_protected() with a constant true condition without holding fnhe_lock. The following interleaving can therefore occur: CPU 0 CPU 1 fib_nhc_update_mtu() update_or_create_fnhe() load fnhe spin_lock_bh(&fnhe_lock) fnhe_remove_oldest() unlink fnhe kfree_rcu(fnhe, rcu) <quiescent state> access fnhe after grace period KASAN reported: BUG: KASAN: slab-use-after-free in fib_nhc_update_mtu+0x3df/0x410 Read of size 8 at addr ffff888107d49000 by task poc/90 Call Trace: fib_nhc_update_mtu+0x3df/0x410 fib_sync_mtu+0x7a/0xd0 fib_netdev_event+0x229/0x3f0 netif_set_mtu_ext+0x33a/0x570 dev_set_mtu+0x88/0x120 The same walk updates fnhe_pmtu and fnhe_mtu_locked. These fields form a pair and other writers serialize them with fnhe_lock. RCU alone prevents reclamation, but would still allow concurrent writers to leave a mixed pair. Walk the table under RCU and acquire fnhe_lock only while updating each exception. RCU keeps the current entry alive while the short critical section serializes its paired PMTU fields. This avoids holding the global lock while scanning all 2048 buckets for every nexthop.9d CVE-2026-643437.8 HIG

2.2%

——1In the Linux kernel, the following vulnerability has been resolved: USB: ldusb: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked")53d CVE-2026-645507.3 HIG

2.2%

——1In the Linux kernel, the following vulnerability has been resolved: net: qualcomm: rmnet: validate MAP frame length before ingress parsing When ingress deaggregation is disabled, rmnet_map_ingress_handler() passes the skb straight to __rmnet_map_ingress_handler(), skipping the length validation that rmnet_map_deaggregate() performs on the aggregated path. The parser then dereferences the MAP header and csum header/trailer based on the on-wire pkt_len without checking skb->len, so a short frame is read out of bounds: BUG: KASAN: slab-out-of-bounds in rmnet_map_checksum_downlink_packet Read of size 1 at addr ffff88801118ed00 by task exploit/147 Call Trace: ... rmnet_map_checksum_downlink_packet (drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c:413) __rmnet_map_ingress_handler (drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c:96) rmnet_rx_handler (drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c:129) __netif_receive_skb_core.constprop.0 (net/core/dev.c:6089) netif_receive_skb (net/core/dev.c:6460) tun_get_user (drivers/net/tun.c:1955) tun_chr_write_iter (drivers/net/tun.c:2001) vfs_write (fs/read_write.c:688) ksys_write (fs/read_write.c:740) do_syscall_64 (arch/x86/entry/syscall_64.c:94) ... Factor that validation out of rmnet_map_deaggregate() into rmnet_map_validate_packet_len() and run it on the no-aggregation path too. The MAP header is bounds-checked first, since this path can receive a frame shorter than the header.70d CVE-2021-25338—

2.2%

——1——CVE-2026-31587—

2.2%

——1——CVE-2026-744797.8 HIG

2.2%

——1In the Linux kernel, the following vulnerability has been resolved: net: pktgen: fix proc entry use-after-free pktgen_change_name() replaces pkt_dev->entry while holding t->if_lock. pktgen_remove_device() removes the same entry before _rem_dev_from_if_list() takes that lock. This allows the following interleaving: CPU 0 (NETDEV_CHANGENAME) CPU 1 (kpktgend) if_lock(t) proc_remove(pkt_dev->entry) proc_remove(pkt_dev->entry) pkt_dev->entry = proc_create_data(...) if_unlock(t) The kthread can pass the stale proc_dir_entry to proc_remove() after the rename path has freed it. A reproducer with a widened race window reports: BUG: KASAN: slab-use-after-free in proc_remove+0x78/0x80 Read of size 8 at addr ffff8881478fea70 by task kpktgend_0/67 Call Trace: proc_remove+0x78/0x80 pktgen_remove_device.isra.0+0x11c/0x4c0 pktgen_thread_worker+0x1214/0x6bc0 kthread+0x2c6/0x3b0 Allocated by task 95: __proc_create+0x204/0x790 proc_create_data+0x72/0xe0 pktgen_thread_write+0xd61/0x1510 Freed by task 28: kmem_cache_free+0xcb/0x3d0 proc_free_inode+0x5b/0x80 rcu_core+0x50a/0x1850 The buggy address belongs to the object at ffff8881478fea00 which belongs to the cache proc_dir_entry of size 192 Move proc_remove() into the if_lock-protected list removal helper. Keep it before list_del_rcu() to preserve the ordering required by add_device(). The rename path must then finish replacing the entry before removal, or it observes that the device is no longer on the list.9d CVE-2026-895487.8 HIG

2.2%

——1In the Linux kernel, the following vulnerability has been resolved: SUNRPC: always drain cache_cleaner before destroying a cache_detail sunrpc_destroy_cache_detail() only cancels the global cache_cleaner delayed_work when cache_list is empty. During per-netns teardown cache_list is never empty because init_net's caches remain registered, so the cancel never fires. After unlink, the caller proceeds to cache_destroy_net() which kfrees the cache_detail while cache_clean() may still hold a dangling pointer to it. The result is a use-after-free: cache_dequeue() takes cd->queue_lock on freed memory, and cache_put() dereferences cd->cache_put as a function pointer from freed slab. Drop the list_empty guard so that cancel_delayed_work_sync() always runs, ensuring any in-flight cache_clean() completes before the cache_detail is freed. Re-arm the cleaner afterwards if other caches are still registered.7d CVE-2026-746377.8 HIG

2.2%

——1In the Linux kernel, the following vulnerability has been resolved: perf/core: Fix group leader use-after-free after sibling detach perf_group_detach() handles leader and sibling detach differently. When the group leader is detached, all siblings are promoted to singleton events and their group_leader pointer is reset to themselves. When a sibling is detached, it is removed from the leader's sibling_list, but its group_leader pointer is left pointing at the old leader. That is harmless when the sibling is being closed and freed immediately, as in the DETACH_DEAD path. It is not safe when the sibling is detached but kept alive, such as during CPU hotplug with DETACH_GROUP. In that case the sibling is removed from the context, while its file descriptor can still keep it alive. A typical failing sequence is: - A group contains leader L and sibling S. - CPU hot-unplug detaches S with DETACH_GROUP, removing it from L->sibling_list but leaving S->group_leader == L. - L is later closed and freed. - A PERF_IOC_FLAG_GROUP ioctl on S follows S->group_leader and dereferences the freed leader. This was reproduced by running the perf event fuzzer, CPU hotplug, and a stress workload concurrently: Unable to handle kernel paging request at virtual address 006b6b6b6b6b6cdb CPU: 2 PID: 12489 Comm: perf_fuzzer 6.18.7 PREEMPT pc : perf_ioctl+0x34c/0xc68 x20: ffffff89a3fa2c70 x8 : 6b6b6b6b6b6b6b6b Code: 943c4a0e 340047a0 f9404a94 f9411e88 (f940b908) Call trace: perf_ioctl+0x34c/0xc68 (P) __arm64_sys_ioctl+0xa0/0xf4 invoke_syscall+0x58/0xe4 el0_svc_common+0xa8/0xdc do_el0_svc+0x1c/0x28 el0_svc+0x40/0xc0 el0t_64_sync_handler+0x68/0xdc el0t_64_sync+0x1c4/0x1c8 The fault happened in perf_ioctl(), where perf_event_for_each() follows the stale group_leader pointer and perf_event_for_each_child() then dereferences the freed leader's context. Fix the use-after-free by promoting the detached sibling to a singleton. Also fix __event_disable() cgroup accounting and event state change.9d CVE-2026-643297.8 HIG

2.2%

——1In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: ccg: Fix use-after-free of ucsi on remove The threaded IRQ handler ccg_irq_handler() calls ucsi_notify_common(), which on a connector-change event calls ucsi_connector_change() and schedules connector work. In ucsi_ccg_remove(), ucsi_destroy() frees uc->ucsi (kfree) before free_irq() is called, so a handler invocation already in flight may access the freed object after ucsi_destroy(). CPU 0 (remove) | CPU 1 (threaded IRQ) ucsi_destroy(uc->ucsi) | ccg_irq_handler() kfree(ucsi) // FREE | ucsi_notify_common(uc->ucsi) // USE Move free_irq() before ucsi_destroy() in the remove path. It is kept after ucsi_unregister(): ucsi_unregister() cancels connector work whose handler issues GET_CONNECTOR_STATUS through ucsi_send_command_common(), which waits for a completion that is signalled from the IRQ handler, so the IRQ must stay active until that work has been cancelled. The probe error path already orders free_irq() before ucsi_destroy(). This bug was found by static analysis.52d CVE-2026-747267.3 HIG

2.2%

——1In the Linux kernel, the following vulnerability has been resolved: bonding: alb: re-check primary_is_promisc under RTNL in bond_alb_monitor bond_alb_monitor() reads primary_is_promisc under RCU, then drops RCU and takes RTNL via rtnl_trylock() before undoing the promiscuity it set on the active slave. In that window the active slave can change under RTNL (RTM_DELLINK -> __bond_release_one() -> bond_alb_handle_active_change()), which already drops the promiscuity and clears primary_is_promisc. The monitor still acts on the stale decision: if the slave was removed with no failover, curr_active_slave is now NULL and the deref faults; if it failed over, the stale dev_set_promiscuity(-1) underflows the new slave's promiscuity counter and pins it in IFF_PROMISC. Oops: general protection fault, probably for non-canonical address ... KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] Workqueue: b42 bond_alb_monitor RIP: 0010:bond_alb_monitor (drivers/net/bonding/bond_alb.c:1600) process_one_work (kernel/workqueue.c:3322) worker_thread (kernel/workqueue.c:3486) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) Kernel panic - not syncing: Fatal exception Re-check primary_is_promisc (and curr_active_slave) after taking RTNL so the monitor only undoes an increment it still owns. The other bonding monitors already re-read state under RTNL in their commit phase (bond_miimon_commit/bond_ab_arp_commit); bond_alb_monitor() was the only one acting on the pre-trylock decision.9d CVE-2026-45958—

2.2%

——1——CVE-2026-31404—

2.2%

——1Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.10d CVE-2026-925117.8 HIG

2.2%

——1In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix potential use after free in ib_destroy_cq_user() When accessing a CQ via the netlink path the only synchronization mechanism for the said CQ is rdma_restrack_get(). Currently, rdma_restrack_del() is invoked at the end of ib_destroy_cq_user(), which is too late, since by that point vendor-specific resources associated with the CQ might already be freed. This can leave a short window where the CQ remains accessible through restrack, leading to a potential use-after-free. Fix this by moving the rdma_restrack_begin_del() call to the start of ib_destroy_cq_user(), ensuring that the CQ is removed from restrack before its internal resources are released. This guarantees that no new users hold references to a CQ that is in the process of destruction. In addition, this change preserves the intended inverted order between create and destroy routines: resources are added to restrack at the end of successful creation, and hence shall be removed from the restrack first thing during the destruction flow, which keeps the lifecycle management consistent and predictable.7d CVE-2026-531617.8 HIG

2.2%

——1In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: fix use-after-free of fastrpc_user in workqueue context There is a race between fastrpc_device_release() and the workqueue that processes DSP responses. When the user closes the file descriptor, fastrpc_device_release() frees the fastrpc_user structure. Concurrently, an in-flight DSP invocation can complete and fastrpc_rpmsg_callback() schedules context cleanup via schedule_work(&ctx->put_work). If the workqueue runs fastrpc_context_free() in parallel with or after fastrpc_device_release() has freed the user structure, it dereferences the freed fastrpc_user. Depending on the state of the context at the time of the race, any one of the following accesses can be hit: 1. fastrpc_buf_free() calls fastrpc_ipa_to_dma_addr(buf->fl->cctx, ...) to strip the SID bits from the stored IOVA before passing the physical address to dma_free_coherent(). 2. fastrpc_free_map() reads map->fl->cctx->vmperms[0].vmid to reconstruct the source permission bitmask needed for the qcom_scm_assign_mem() call that returns memory from the DSP VM back to HLOS. 3. fastrpc_free_map() acquires map->fl->lock to safely remove the map node from the fl->maps list. The resulting use-after-free manifests as: pc : fastrpc_buf_free+0x38/0x80 [fastrpc] lr : fastrpc_context_free+0xa8/0x1b0 [fastrpc] fastrpc_context_free+0xa8/0x1b0 [fastrpc] fastrpc_context_put_wq+0x78/0xa0 [fastrpc] process_one_work+0x180/0x450 worker_thread+0x26c/0x388 Add kref-based reference counting to fastrpc_user. Have each invoke context take a reference on the user at allocation time and release it when the context is freed. Release the initial reference in fastrpc_device_release() at file close. Move the teardown of the user structure — freeing pending contexts, maps, mmaps, and the channel context reference — into the kref release callback fastrpc_user_free(), so that it runs only when the last reference is dropped, regardless of whether that happens at device close or after the final in-flight context completes.111d CVE-2026-532057.1 HIG

2.2%

——1In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Add bounds checks for firmware log indices Add validation that read and write indices in the firmware log buffer are within valid bounds (< data_size) before using them. If out-of-bounds indices are encountered (from firmware), clamp them to safe values instead of proceeding with invalid offsets. This prevents potential out-of-bounds buffer access when firmware supplies invalid log indices.6d CVE-2026-45938—

2.2%

——1——CVE-2026-643427.8 HIG

2.2%

——1In the Linux kernel, the following vulnerability has been resolved: USB: iowarrior: fix use-after-free on disconnect Submitted write URBs are not stopped on close() and therefore need to be stopped unconditionally on disconnect() to avoid use-after-free in the completion handler.53d