CVE-2024-58099
In the Linux kernel, the following vulnerability has been resolved: vmxnet3: Fix packet corruption in vmxnet3_xdp_xmit_frame Andrew and Ni
CVSS
8.6
Alto
EPSS
0.2%
p7
KEV
—
Exploit Today
2
0-100
Publicado: 29 abr 2025 · Última mod.: 4 ago 2026 · CWE-787
0.2%EPSS · 30 días0.2%
2026-07-072026-08-04
In the Linux kernel, the following vulnerability has been resolved: vmxnet3: Fix packet corruption in vmxnet3_xdp_xmit_frame Andrew and Nikolay reported connectivity issues with Cilium's service load-balancing in case of vmxnet3. If a BPF program for native XDP adds an encapsulation header such as IPIP and transmits the packet out the same interface, then in case of vmxnet3 a corrupted packet is being sent and subsequently dropped on the path. vmxnet3_xdp_xmit_frame() which is called e.g. via vmxnet3_run_xdp() through vmxnet3_xdp_xmit_back() calculates an incorrect DMA address: page = virt_to_page(xdpf->data); tbi->dma_addr = page_pool_get_dma_addr(page) + VMXNET3_XDP_HEADROOM; dma_sync_single_for_device(&adapter->pdev->dev, tbi->dma_addr, buf_size, DMA_TO_DEVICE); The above assumes a fixed offset (VMXNET3_XDP_HEADROOM), but the XDP BPF program could have moved xdp->data. While the passed buf_size is correct (xdpf->len), the dma_addr needs to have a dynamic offset which can be calculated as xdpf->data - (void *)xdpf, that is, xdp->data - xdp->data_hard_start.
CVECVSSEPSSKEVRExplotTítuloVis.
CVE-2026-712639.1 CRÍ—
———The LINUXTCP port of FreeModbus contains an off-by-one bounds check in xMBPortTCPPool() (demo/LINUXTCP/port/porttcp.c). The check `if (usTCPFrameBytesLeft > MB_TCP_BUF_SIZE)` uses a strict greater-than comparison instead of greater-than-or-equal against the 263-byte MB_TCP_BUF_SIZE limit. An MBAP frame with a Length field of 264 makes usTCPFrameBytesLeft equal to 263, which passes the flawed check, and the subsequent recv() call writes up to 263 bytes starting at buffer offset 7 into the 263-byte static buffer aucTCPBuf, overflowing it by 7 bytes into the adjacent static variable usTCPBufPos. A single crafted, unauthenticated Modbus TCP packet triggers the overflow, since Modbus has no built-in authentication.5hCVE-2026-712558.6 ALT—
———nanoMODBUS through v1.23.0 contains an out-of-bounds write in the Modbus client-side recv_read_device_identification_res() function (FC 0x2B/MEI 0x0E, Read Device Identification) in nanomodbus.c. The server-supplied object_length field (0-246) is validated only against the remaining PDU size (res_size_left) and is never validated against the caller-supplied buffers_length parameter. After copying data with strncpy(buffers_out[buf_index], str, buffers_length), the code unconditionally writes a NUL terminator at buffers_out[buf_index][object_length]. When a malicious or compromised Modbus server sends a response with object_length greater than or equal to the client's buffers_length, this NUL write lands past the end of the caller-provided buffer, corrupting adjacent stack or heap memory on the client.8hCVE-2026-712549.8 CRÍ—
———nanoMODBUS through v1.23.0 contains an out-of-bounds write in the Modbus server-side handle_read_file_record() function (FC 0x14, Read File Record) in nanomodbus.c. The function validates that the total request size does not exceed 245 bytes and that each sub-request's record_length is at most 124, but it never validates the CUMULATIVE response size across all sub-requests before processing them. The accumulator response_data_size is declared as uint8_t and is incremented by 2 + record_length*2 for each of up to 35 sub-requests; with 35 sub-requests of record_length=124, the cumulative demand is 8750 bytes, which overflows the uint8_t accumulator. A subsequent loop then calls get_n(), an internal function with no bounds checking, once per sub-request to obtain a pointer into the 260-byte msg.buf receive buffer and advances the internal buf_idx by up to 248 bytes per call; swap_regs() then writes to that pointer unconditionally. A single crafted FC 0x14 request from an unauthenticated network client can cause up to ~8490 bytes to be written out of bounds past the 260-byte buffer, corrupting adjacent memory in the server process and leading to denial of service or potential remote code execution, particularly on embedded/bare-metal targets without memory protection.8hCVE-2026-242538.2 ALT—
——0NVIDIA Dynamo for Linux contains a vulnerability where an attacker could cause an out-of-bounds write. A successful exploit of this vulnerability might lead to denial of service and data tampering.1dCVE-2026-187392.5 BAJ0.7%
——0A flaw was found in popt, a command-line option parsing library. An off-by-one error in the poptStuffArgs function, when repeatedly called by a host application or through deep alias nesting, can lead to corruption of internal program data. This corruption could potentially enable a local attacker to execute arbitrary code if the host application then unsafely processes the altered data.16hCVE-2026-108498.2 ALT18.3%
——5The hawkBit device management client in subsys/mgmt/hawkbit accumulates the body of an HTTP response from the update server into a heap buffer in response_json_cb() (subsys/mgmt/hawkbit/hawkbit.c). The buffer is sized to hold the received body bytes but reserves no space for a terminating NUL. When the full response has arrived, the code writes response_data[downloaded_size] = '\0' — and whenever the accumulated body length equals the allocation, that terminator lands one byte past the end of the heap object (a heap-based out-of-bounds write, CWE-122 / CWE-787).
The body length and fragmentation are taken directly from the parsed HTTP response (rsp->body_frag_start / rsp->body_frag_len) and are fully controlled by the remote hawkBit server, which chooses its own response length. The precise trigger depends on how the buffer grows, and both forms are remotely reachable. Since v4.0.0 the reallocation is sized to exactly downloaded_size + body_len, so any response body larger than the 1100-byte initial buffer makes the out-of-bounds write deterministic; such response sizes are normal for hawkBit deployment metadata. Before v4.0.0 the buffer grew by doubling and the growth check ((downloaded_size + body_len) > response_buffer_size) is false at equality, so a response body whose length is exactly the current allocation — 1100 bytes with the default initial buffer — skips the reallocation entirely and writes the terminator at response_data[1100] of an 1100-byte object. The HTTP length-mismatch check does not catch this, because the declared and received lengths genuinely agree. Either form is reachable by a malicious, compromised, or man-in-the-middle update server (TLS is optional and, when enabled, does not protect against a hostile server), with no authentication of response content and no client-side length cap protecting the write.
The out-of-bounds write is a fixed single NUL byte immediately following the allocation, corrupting adjacent allocator metadata or the next allocation. The practical impact is heap corruption leading to denial of service (fault on a subsequent allocation or free), with the bounded, allocator-dependent possibility of further corruption. The fix sizes the buffer to the body length plus one and copies with memcpy, ensuring the terminator always lands within the allocation.1d