Vulnerabilidades explotables hoy
414,707en la vista actual
Score único combinando CVSS, membresía KEV y EPSS. Cada CVE con su ficha propia — timeline desde publicación hasta explotación activa.
En catálogo KEV1,779
Nuevos KEV · 24H0
Exploit Today ≥ 701,707
Distribución · última ventana
- Crítico5,438
- Alto21,753
- Medio20,070
- Bajo2,096
Filtros
Ventana
Severidad
Filtros
CVECVSSEPSSKEVRExplotTítuloVis.
CVE-2026-1279152.0 BAJ—
——0The MCUboot TLV iterator bootutil_tlv_iter_next() in boot/bootutil/src/tlv.c walks image trailer TLVs with a single loop guard (it->tlv_off < it->tlv_end) and advances by sizeof(struct image_tlv) + tlv.it_len using the attacker-controlled it_len field, without validating that the entry's header or payload stays within it->tlv_end. As a result the 4-byte header read can extend up to 3 bytes past the declared TLV area, and the returned (off, len) can describe a payload that runs past it.
The path is pre-authentication: TLVs are parsed during bootutil_img_validate() before the signature is verified, and a crafted image can be presented through DFU / serial-recovery / OTA. However the impact is contained by surrounding guards: bootutil_img_validate() first rejects a TLV area larger than bootutil_max_image_size(), the default LOAD_IMAGE_DATA sink is flash_area_read() which bounds-checks against the flash partition and fails an out-of-partition read, and every payload consumer (EXPECTED_HASH_TLV, EXPECTED_KEY_TLV, EXPECTED_SIG_TLV, IMAGE_TLV_SEC_CNT) clamps len against a fixed buffer before copying.
The residual effect in a default flash build is therefore an out-of-region read confined to the attacker's own slot partition whose result is never observable, yielding at worst a clean validation failure rather than memory corruption or information disclosure. A genuine (though still bounded) out-of-bounds read remains under the non-default MCUBOOT_RAM_LOAD configuration, where LOAD_IMAGE_DATA is an unchecked memcpy. The fix is to validate each entry's header and payload against it->tlv_end inside the iterator.10hCVE-2026-1272847.3 ALT—
——0A security flaw has been discovered in SourceCodester Food Ordering System 1.0. This affects an unknown part of the file admin/add_category.php of the component Admin Write Handler. Performing a manipulation of the argument title/description/price/current_image/featured/active/id results in sql injection. It is possible to initiate the attack remotely. The exploit has been released to the public and may be used for attacks.3hCVE-2026-1272824.3 MED—
——0A vulnerability was determined in SourceCodester Smart Attendance System with QR Code Scanner 1.0. Affected by this vulnerability is an unknown functionality of the file reset_password.php. This manipulation of the argument Username causes cross site scripting. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized.1dCVE-2026-128067——
——0Pillow is a Python imaging library. From 2.3.0 through 12.3.0, Pillow applications that save compressed TIFF images through libtiff can pass attacker-controlled image geometry tags to the encoder while allocating its row buffer from the actual image dimensions. The affected TiffImagePlugin._save path allows ImageWidth, ImageLength, or SamplesPerPixel from exif=, tiffinfo=, or a source TIFF IFD to make libtiff consume a larger scanline than the buffer supplied by ImagingLibTiffEncode. This can read heap memory into the generated TIFF or crash the process. When TIFF Predictor 2 is enabled, libtiff can rewrite the oversized scanline in place and corrupt memory beyond the buffer. A carried-over PlanarConfiguration value of 2 instead makes libtiff use a shorter scanline and can produce an undecodable output file, but is not established to cause the out-of-bounds access. This issue is fixed in version 13.0.0.9hCVE-2026-128065——
——0@grpc/grpc-js implements the core functionality of gRPC purely in JavaScript, without a C++ addon. From 1.14.0 through 1.14.1, XdsServer in @grpc/grpc-js-xds can acknowledge Route and VirtualHost resources while failing to apply their RBACPerRoute override configurations. The override parser is not registered under the override message type, override maps are stored under a type URL instead of the configured HTTP filter name, and VirtualHost override maps are not read. When experimental RBAC is enabled and a trusted xDS control plane supplies a broad top-level ALLOW policy with a stricter matching override, affected servers evaluate RPCs under the broad policy and can accept requests that should be denied. This issue is fixed in version 1.14.2.1dCVE-2026-1267924.7 MED—
——0A memory-safety flaw in the key-management request-building component of the library can lead to an out-of-bounds write on the heap. A fixed-size output buffer is used under an assumption about cryptographic key size that is never validated, so when the library is embedded by a caller that supplies its own cryptographic callback implementation, data larger than the buffer can be written past its end. Exploitation requires the ability to control the embedding application's in-process key-management provider configuration, a high-privilege position. The demonstrated impact is memory corruption resulting in abnormal termination of the client process.10hCVE-2026-126362——
——0Astro is a web framework for content-driven websites. From 5.7.3 until 9.1.2, the @astrojs/svelte renderer inserted a named slot into the quoted name attribute of an astro-slot wrapper without HTML escaping. Request-controlled slot names containing a quote could terminate the attribute and inject active HTML. Exploitation required a hydrated Svelte component using a client:* directive and dynamic rendering of the attacker-chosen slot; components that did not render that slot emitted only Astro's escaped fallback content. Both server rendering and client-side hydration used the unsafe slot name. This issue is fixed in version 9.1.2.9hCVE-2026-1263605.3 MED—
——0OpenTelemetry Python provides the Python API and SDK for OpenTelemetry. Prior to 1.45.2, TraceContextTextMapPropagator.extract() in opentelemetry-api can perform quadratic-time regular-expression backtracking on a malformed traceparent value containing a trace-context prefix, a long whitespace sequence, and an embedded newline. Exploitation requires an attacker-controlled carrier that preserves embedded newlines and permits a sufficiently large value, because conforming HTTP header values cannot contain embedded newlines. JSON-based carriers, including applicable MCP request metadata integrations, can preserve the required newline depending on the SDK, instrumentation, and message-size limits. Parsing on an asynchronous server's event-loop thread can consume excessive CPU and delay unrelated requests, while the advisory does not establish disclosure, modification, or code execution. This issue is fixed in version 1.45.2.1dCVE-2026-1263585.3 MED—
——0Hono is a Web application framework that provides support for any JavaScript runtime. From 4.1.4 until 4.13.16, RegExpRouter can omit wildcard middleware in three version-specific cases: since 4.13.0, middleware using the explicit default parameter pattern in /api/:tenant{[^/]+}/admin/* is not applied to a route written as /api/:tenant/admin/:id; since 4.1.4, middleware on /admin/* is not applied to a route registered as /admin* for paths under /admin/; and since 4.4.0, a request path containing an encoded line terminator can reach the not-found handler without wildcard middleware. The default SmartRouter selects RegExpRouter for most applications, and the router's registration-time coverage calculation treated the first two matching pattern pairs as different while its compiled wildcard did not match line terminators in the third case. An unauthenticated client can reach a route handler or the not-found handler without authentication or authorization middleware registered on the wildcard path. TrieRouter, LinearRouter, and PatternRouter apply the middleware in the three described cases. This issue is fixed in version 4.13.16.3hCVE-2026-1263565.3 MED—
——0Hono is a Web application framework that provides support for any JavaScript runtime. From 4.5.1 until 4.13.16, validator('form') uses a strict whole-header pattern that fails to recognize multipart/form-data when its Content-Type includes another legal parameter or extra whitespace after a semicolon. The validation callback receives an empty object even though c.req.parseBody() or c.req.formData() can still parse and expose all submitted fields to the handler. An unauthenticated client can therefore bypass allow-list or required-field checks when the application relies on the form validator and its callback accepts an empty object. application/x-www-form-urlencoded requests are not affected. This issue is fixed in version 4.13.16.1dCVE-2026-1263555.3 MED—
——0Hono is a Web application framework that provides support for any JavaScript runtime. Prior to 4.13.16, csrf() limits origin validation to the content types normally sent by HTML forms and therefore does not validate text/ping requests generated by Chromium hyperlink auditing. Chrome and Edge can send a cross-origin credentialed POST without a CORS preflight through an <a ping> action, and the middleware then skips both Origin and Sec-Fetch-Site checks. The fixed request body limits exploitation to state-changing endpoints whose effect is selected by the path or query string and does not depend on submitted body data. The user's cookie must accompany the request, which generally requires a same-site origin or a cookie configured with SameSite=None, and Firefox does not send hyperlink-auditing pings by default. This issue is fixed in version 4.13.16.6hCVE-2026-1263544.8 MED—
——0Addressable is an alternative implementation to the URI implementation that is part of Ruby's standard library. From 2.2.5 until 2.9.1, Addressable::URI.normalize_path can resolve a path containing leading parent segments and later parent segments to a different path than an RFC 3986 resolver. URI#normalize, URI#join, URI#==, and URI#=== inherit the result. An application that authorizes the Addressable-normalized path but sends the original URI to another resolver can allow access outside the intended path allowlist. Applications that use the same normalized value for authorization and the request, or reject parent segments, are unaffected. This issue is fixed in version 2.9.1.9hCVE-2026-1263535.9 MED—
——0Addressable is an alternative implementation to the URI implementation that is part of Ruby's standard library. From 2.3.0 until 2.9.1, URI template expressions containing several exploded variables generate ambiguous regular expressions that can divide a run of members among the variables in polynomially many ways. Template#match or Template#extract processing of an attacker-controlled URI can therefore consume a thread and cause denial of service. The flaw affects MRI Ruby before 3.2 and JRuby, TruffleRuby 40.0, and plus or number-sign expressions on MRI Ruby 3.2. MRI Ruby 3.3 and later, URI parsing, and Template#expand are unaffected. This issue is fixed in version 2.9.1.10hCVE-2026-1263484.3 MED—
——0Addressable is an alternative implementation to the URI implementation that is part of Ruby's standard library. From 2.0.0 until 2.9.1, the pure-Ruby Addressable::IDNA.to_unicode implementation decodes invalid Punycode A-labels instead of returning them unchanged. Labels that decode to ASCII text or fail to convert back to the same A-label can therefore make Addressable::URI#display_uri show a trusted-looking host while host, normalized_host, and the connection target retain the attacker-controlled encoded host. A trusted-name comparison using Addressable::IDNA.to_unicode output can also treat two different hosts as the same without displaying the URI. The native libidn implementation, to_ascii, and normalized_host are unaffected. This issue is fixed in version 2.9.1.10hCVE-2026-1263473.1 BAJ—
——0Tornado is a Python web framework and asynchronous networking library. In versions through 6.6.0, applications using tornado.web.RedirectHandler with URL templates that allow attacker-controlled substitutions to influence the destination can be vulnerable to an open redirect using three or more leading slashes. Differences between Python’s URL parsing and browser URL interpretation allow a crafted destination to redirect a user to an attacker-controlled host. The remediation for CVE-2026-116578 in version 6.6.0 did not fully address this case. This issue is fixed in version 6.6.1.6hCVE-2026-1263465.9 MED—
——0basic-ftp is an FTP client for Node.js. Prior to 6.2.3, FTPContext.send() throws when a command contains carriage return, line feed, or NUL characters, but calls made from response handlers execute synchronously inside the control socket's data event without an exception boundary. In Client.login(), an attacker-influenced password reaches the PASS command after a server sends a 331 response, and in a resumed download an attacker-influenced remote path reaches the RETR command after a 350 response to REST. The resulting exception does not reject client.access() or downloadTo(), escapes ordinary promise error handling, and terminates the Node.js process, while the validation guard still prevents command injection. This issue is fixed in version 6.2.3.9hCVE-2005-0394——
——0Rejected reason: DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was withdrawn by its CNA. Notes: none27dCVE-2026-1263435.3 MED—
——0@hono/node-server allows running the Hono application on Node.js. From 2.0.0 until 2.1.6, the WebSocket upgrade handler waits for the Hono application to finish asynchronous middleware or handler work without first attaching an error listener to the socket. If an unauthenticated client resets the TCP connection during that window, the socket emits an unhandled ECONNRESET error and terminates the Node.js process. If a global uncaughtException handler suppresses termination, the pending upgrade waiter is not released and repeated requests can grow the heap. This affects applications that enable WebSocket support and perform asynchronous work on the upgrade path. This issue is fixed in version 2.1.6.6hCVE-2026-1262105.3 MED—
——0@hono/node-server allows running the Hono application on Node.js. Prior to 1.19.18 and from 2.0.0 until 2.1.6, the server passes a raw request-target containing a backslash in its path to the WHATWG URL parser, which treats the backslash as a path separator and resolves dot segments. A reverse proxy, load balancer, or web application firewall that preserves the backslash and applies path-based rules to the original request can therefore permit a request that the application normalizes to a blocked route. This lets an unauthenticated client reach route content that the upstream component was intended to deny, while Hono application access controls are unaffected because they operate on the normalized path. This issue is fixed in versions 1.19.18 and 2.1.6.3hCVE-2026-198093.3 BAJ—
——0The user-mode system call verifier z_vrfy_charger_get_prop() in drivers/charger/charger_handlers.c declares an uninitialized union charger_propval k_val on the kernel (privileged) stack, passes it to the charger driver back end via z_impl_charger_get_prop(), and then copies the full sizeof(union charger_propval) back into the calling user thread's buffer with k_usermode_to_copy(). That discloses kernel stack contents on two paths:
On error. The copy-out ignores the driver's return code. In-tree back ends return an error without writing through the value pointer for properties they do not implement: charger_gpio_get_prop() returns -ENOTSUP unconditionally, and bq24190_get_prop() has a default: return -ENOTSUP; arm that never touches val. The whole union is then stack residue.
On success. A back end writes only the one union member the requested property selects (for example sbs_charger.c writes the one-byte val->present for CHARGER_PROP_PRESENT and returns 0), yet the handler still copies the whole union, so every byte beyond that member is uninitialized.
The handler is compiled only when CONFIG_USERSPACE=y and is reachable by any user-mode thread that has been granted access to a charger device object. K_SYSCALL_DRIVER_CHARGER() validates only the device object and its API pointer, not the property identifier, so an unprivileged thread can choose prop freely: an unimplemented property forces the error path, a narrow one the success path, and the call can be repeated at will.
Each call discloses up to the size of the union (12 bytes on a 32-bit target, 16 bytes on 64-bit targets where the function-pointer members widen it) of supervisor-stack memory. The bytes are residue of earlier kernel-side frames on the thread's privileged stack and can contain kernel object addresses and saved return addresses, which an unprivileged thread cannot otherwise observe and which help defeat address-layout assumptions when exploiting a separate memory-safety defect. There is no integrity or availability impact.
Two commits fix it, and both are needed. 5054384e983c skips the copy-out when the back end reports an error. c31cac727d02 zeroes the union before the driver call, so the bytes copied out on success are driver-written data or zeros. A tree carrying only the first still leaks on every successful call.1dCVE-2026-1271416.5 MED—
——0SOGo before 5.12.13 contains a denial of service vulnerability that allows authenticated attackers to exhaust all worker processes by configuring an auxiliary IMAP mail account pointing to a controlled host that accepts a TCP connection but never sends an IMAP greeting response. Attackers can issue concurrent GET requests to the mail view of this account to hold workers indefinitely without an effective timeout, occupying every SOGo worker and denying service to all users for approximately five minutes until the watchdog kills and respawns the stuck workers.1dCVE-2026-863244.3 MED—
——0A flaw was found in Foreman’s Api::V2::SshKeysController, where the target user is resolved through Foreman::Controller::UserAware#find_user using User.find(params[:user_id]) without enforcing the required parent-user authorization check. An attacker with the create_ssh_keys permission can exploit this authorization bypass by submitting POST /api/v2/users/:user_id/ssh_keys with another user’s ID and injecting their own public SSH key into the targeted account. The injected key is subsequently propagated to hosts provisioned by that user, potentially allowing the attacker to authenticate to and gain SSH access to the victim’s managed hosts.9hCVE-2026-863228.8 ALT—
——0A flaw was found in Foreman’s Api::V2::PersonalAccessTokensController, where Foreman::Controller::UserAware#find_user resolves the target account using User.find(params[:user_id]) without applying the required parent-user authorization check. An attacker with the create_personal_access_tokens permission can therefore invoke POST /api/v2/users/:user_id/personal_access_tokens with another user’s ID and create a Personal Access Token on their behalf. The resulting plaintext token is returned in the API response, while PersonalAccessToken#check_permissions_after_save only validates create_personal_access_tokens on the token and does not enforce edit_users authorization on the target user. The attacker can then use the forged token to authenticate as the victim, potentially resulting in complete account takeover, including administrator accounts.6hCVE-2026-1272088.8 ALT—
——0datamodel-code-generator before 0.84.0 contains a code injection vulnerability that allows attackers to achieve arbitrary code execution by supplying a malicious JSON Schema with a crafted x-python-type annotation containing a string ast.Constant node in a subscript slice position, which bypasses validation in parse_python_type_annotation and _python_type_expr_from_ast. Attackers can embed malicious Python expressions such as __import__ calls within quoted string literals in the generated source code, which Pydantic v2 evaluates as a ForwardRef via eval() during model_rebuild(), resulting in arbitrary code execution on developer workstations, CI/CD pipelines, or applications that generate and import the produced models at runtime.9hCVE-2026-1271317.4 ALT—
——0SOGo before 5.12.13 contains a missing rate limiting vulnerability in its web login TOTP verification that allows attackers who already possess a victim's password to brute-force the second-factor code without triggering any lockout. Attackers can send repeated POST requests to /SOGo/connect with wrong verification codes at high speed since failed TOTP attempts never increment the failed-login counter and SOGoMaximumFailedLoginCount does not apply, enabling indefinite guessing across 30-second code windows to bypass two-factor authentication.1dCVE-2026-1272075.4 MED—
——0Sendcloud for WooCommerce through 1.0.41 contains a missing authorization vulnerability that allows authenticated low-privileged users, including Subscribers, to access the sc_support_get and sc_support_save AJAX actions due to the absence of capability and nonce checks in SCCSP_Support_Controller. Attackers can call these wp_ajax_ handlers directly or via cross-site request forgery to disclose integration configuration data such as INTEGRATION_ID, SERVICE_POINT, CARRIERS, and MIN_LOG_LEVEL, and to modify the plugin's logging verbosity. This is an incomplete fix of CVE-2026-57760.6hCVE-2026-1269977.3 ALT—
——0A vulnerability was identified in JeecgBoot up to 3.9.6. This affects the function RestTemplate.exchange of the file org/jeecg/modules/airag/flow/c/a.class of the component flow-run Endpoint. The manipulation leads to server-side request forgery. Remote exploitation of the attack is possible. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.7hCVE-2026-126330——
——0Docker Sandboxes can silently republish a sandbox service after an operator removes its automatically assigned host-port mapping. The daemon removes the active binding but retains the original publication request, allowing a later port change or sandbox restart to publish the service again on a new host port. An attacker able to reach the restored endpoint may regain access to the service. Both TCP and UDP mappings are affected. Exposure is limited to the original bind address, which defaults to loopback. The issue is fixed in version 0.53.0.1dCVE-2026-1262084.7 MED—
——0Loofah is a general library for manipulating and transforming HTML/XML documents and fragments, built on top of Nokogiri. Prior to 2.25.3, Loofah's SVG_ALLOW_LOCAL_HREF safelist lists textPath with lowercase spelling that does not match the HTML5 parser's element name and omits mpath, so external href and xlink:href values on those elements survive sanitization. Firefox fetches the attacker-chosen URL when a viewer renders the content, which can disclose the viewer's IP address, user agent, referrer, and access to hosts routable only from the viewer's network. Chrome and WebKit do not fetch these references, and the impact is a network request rather than script execution. The rails-html-sanitizer PermitScrubber reuses the affected safelist when SVG elements are permitted. This issue is fixed in version 2.25.3.1dCVE-2016-9352——
——0Rejected reason: DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: The CNA or individual who requested this candidate did not associate it with any vulnerability during 2016. Notes: none27dCVE-2026-1271015.5 MED—
——0A flaw was found in SSSD's PAM responder. A local attacker can send an authentication request without first negotiating the client protocol version. The responder dereferences a NULL protocol-version pointer and crashes, disrupting SSSD-backed authentication. Repeated crafted requests can sustain the denial of service.1dCVE-2026-162403.7 BAJ—
——0Use of externally-controlled format string in PostgreSQL pg_basebackup allows an attacker having already compromised a server to achieve disclosure from pg_basebackup memory, via backup manifest bytes. The vulnerability does not return the improperly-read bytes back to the attacker's server, so a successful attack would need separate implementation-specific secrets for that. Integrity impact is unlikely; in particular, the applicable formatter does not support %n. Versions before PostgreSQL 18.7, 17.12, 16.16, 15.20, and 14.25 are affected.1dCVE-2026-146618.1 ALT—
——0External control of file name in PostgreSQL dblink and CREATE/ALTER SUBSCRIPTION allows a user to achieve persistent denial of service, via appending invalid data to a chosen file. Specifically, the "sslkeylogfile" connection parameter appends data, in NSS keylog format, to a file of the user's choosing. This "sslkeylogfile" mechanism cannot add arbitrary bytes. Within major version 18, minor versions before PostgreSQL 18.7 are affected. Versions before PostgreSQL 18 are also affected if libpq version 18 or later is installed and in use by the server.1dCVE-2026-1269966.3 MED—
——0A vulnerability was determined in SakanaAI text-to-LoRA 0.0.1. Affected by this issue is the function get_tokenizer of the file src/hyper_llm_modulator/utils/model_loading.py of the component Checkpoint Loading. Executing a manipulation of the argument base_model_name_or_path can lead to path traversal. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized. The project was informed of the problem early through an issue report but has not responded yet.1dCVE-2026-126206——
——0Loofah is a general library for manipulating and transforming HTML/XML documents and fragments, built on top of Nokogiri. In 2.25.2, Loofah::HTML5::Scrub.allowed_uri? treats a data URI mediatype containing the HTML5 named solidus reference / as malformed and falls back to the allowed text/plain, while a browser decodes the reference and interprets the same value as text/html. An application that validates a user-controlled URL with this helper and renders the approved value in href or another browser-interpreted URI attribute can allow cross-site scripting. Rails::HTML::Sanitizer.allowed_uri? re-exports the affected helper. Loofah's default sanitize() path is not affected because Nokogiri decodes the entity before URI validation. This issue is fixed in version 2.25.3.3hCVE-2026-453417.5 ALT—
——0BACnet Stack is a BACnet open source protocol stack C library for embedded systems. From versions 1.4.0 to before 1.4.4, and 1.5.0 to before 1.5.1, a NULL pointer dereference can be triggered in bacnet_device_object_reference_decode() when a WriteProperty request updates OBJECT_STRUCTURED_VIEW / PROP_SUBORDINATE_LIST. This issue has been patched in versions 1.4.4 and 1.5.1.7hCVE-2026-452658.2 ALT—
——0BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.4 and 1.5.1, there is a stack-based out-of-bounds write / stack-buffer-overflow in bacnet-stack when the server processes a malicious Atomic-Read-File request in record access mode. The bug is triggered on the real server side. A crafted request can set an excessively large RecordCount, which is later used as the loop bound for writing record data into a stack-allocated BACNET_ATOMIC_READ_FILE_DATA data structure. However, the stack object only has space for one fileData element. When the loop reaches i = 1, the code computes &data->fileData[1], which is already out of bounds, and the resulting invalid pointer is passed down to memmove(), causing a stack-buffer-overflow. This issue has been patched in versions 1.4.4 and 1.5.1.3hCVE-2026-1240155.9 MED—
——0XWEB EVO 5.6.2 through 5.8.8 contains an authentication bypass vulnerability that allows unauthenticated attackers to set the password of any account flagged must-reset-at-next-login by exploiting missing session validation in the users.lua update_password action. Attackers can reset the password of newly onboarded operator accounts, clearing the password_expiration flag and gaining an immediately usable authenticated foothold on the system. This product line reached it's end of service date in March 2026.11hCVE-2026-1240149.1 CRÍ—
——0XWEB EVO 4.3.0 through 5.8.8 contains an unauthenticated arbitrary file write vulnerability that allows remote attackers to modify the system configuration file /etc/xwebconfig.json by sending a crafted POST request to config.lua with action=set, which performs no session validation and writes the raw, unvalidated request body. Attackers can tamper with configuration values such as model and plugin fields or trigger a SYSTEM_NOT_CONFIGURED state via the unauthenticated action=get and action=set operations, resulting in configuration tampering and denial of service. This product line reached it's end of service date in March 2026.3hCVE-2026-1240128.1 ALT—
——0XWEB EVO 5.6.2 through 5.8.8 contains a hardcoded credential vulnerability where the Administrator web account is configured to use password_mode daily_password with no stored password, as the Users.authenticate function in lualib_users.lua synthesizes the Administrator configuration without validating any stored secret. Attackers who can derive the MAC-based daily password can authenticate as Administrator to obtain a full admin session on the device. This product line reached it's end of service date in March 2026.11h