Vulnerabilidades explotables hoy
418,259en la vista actual
Score único combinando CVSS, membresía KEV y EPSS. Cada CVE con su ficha propia — timeline desde publicación hasta explotación activa.
En catálogo KEV1,786
Nuevos KEV · 24H0
Exploit Today ≥ 701,715
Distribución · última ventana
- Crítico4,719
- Alto18,240
- Medio17,989
- Bajo1,975
Filtros
Ventana
Severidad
Filtros
CVECVSSEPSSKEVRExplotTítuloVis.
CVE-2026-99396——
———In the Linux kernel, the following vulnerability has been resolved:
xfs: bound da-node entry count against the correct geometry
xfs_da3_node_verify() bounds the node entry count against the larger of
the directory and attribute geometries because, as a buffer verifier, it
cannot tell whether the block belongs to the directory or the attribute
tree. When the directory block size exceeds the fs block size (e.g.
mkfs.xfs -n size=64k -b size=4k), an attribute node buffer is a single fs
block that holds only m_attr_geo->node_ents entries, yet a crafted attr
node may claim a count up to m_dir_geo->node_ents and still pass the
verifier.
xfs_da3_node_lookup_int() then indexes btree[] up to that count during
its binary search -- an out-of-bounds read via getxattr/listxattr on a
mounted crafted image.
The buffer verifier is the wrong place to tighten this: it has no fork
context, and the transaction-less read path used by getxattr does not run
xfs_da3_node_set_type() either. xfs_da3_node_lookup_int(), on the other
hand, always runs on that path and holds args->geo, the geometry of the
fork actually being searched. Bound the entry count against
args->geo->node_ents there, before walking the entries.11hCVE-2026-99393——
———In the Linux kernel, the following vulnerability has been resolved:
xfs: don't overrun incore inode when cleaning attr forks
LOLLM noticed that xrep_dinode_check_afork doesn't check for a
di_forkoff value that is so large that the attr fork would begin after
the end of the inode space. This causes afork_{ptr,size} to be
nonsense. What we really ought to do here is zap the attr fork.11hCVE-2026-99387——
———In the Linux kernel, the following vulnerability has been resolved:
smb: client: bound POSIX lock data area by response length
CIFSSMBPosixLock() receives a TRANS2 response whose server-provided
DataOffset and DataCount are not required by validate_t2() to describe an
interval inside the response. A server can therefore make the client read a
cifs_posix_lock beyond the response buffer and return those kernel bytes
through F_GETLK.
Use smbCalcSize() to obtain the full response length after any multipart
TRANS2 reassembly, then reject data areas that extend past it before
dereferencing them.11hCVE-2026-929074.3 MED—
———IBM watsonx.data 2.4.0 through 2.4.0 patch 8 could allow a remote authenticated attacker to conduct a server-side request forgery due to a server-side request forgery (SSRF) vulnerability.5hCVE-2026-99383——
———In the Linux kernel, the following vulnerability has been resolved:
smb: client: reclaim credits for decrypted reads with no matching mid
When a decrypted SMB2 READ response carries a MessageId that matches no
outstanding request, both the inline receive_encrypted_read() and the
offloaded smb2_decrypt_offload() paths drop the frame without accounting
the credits the server granted in it. The plaintext unknown-frame path in
cifs_demultiplex_thread() already reclaims them with
smb2_add_credits_from_hdr(), so encrypted reads leak credits that the
plaintext path would not.
This also happens for legitimate frames - e.g. a reply that arrives after
the client has timed out and dropped the mid - so over a long-lived
connection the client's credit count drifts down and can eventually starve
it of the ability to issue requests. The frame is AEAD-authenticated, so
the granted credits in the decrypted header come from the real server and
are safe to apply.
Reclaim the credits from the decrypted header before dropping the frame,
and export smb2_add_credits_from_hdr() so the SMB2 receive paths can use it.11hCVE-2026-99380——
———In the Linux kernel, the following vulnerability has been resolved:
smb: client: validate NT transaction response layout and offsets
validate_ntransact() assumes that the response uses the fixed 18-word NT
transaction layout. A different WordCount makes get_bcc() locate the byte
count at a different offset from pSMBr->ByteCount, allowing the subsequent
bounds checks to use inconsistent response boundaries.
The function also turns the 32-bit ParameterOffset and DataOffset fields
into pointers before checking their bounds. On a 32-bit client, a large
offset can wrap the pointer below end_of_smb and pass the one-sided pointer
comparison. The caller then dereferences the parameter pointer or copies
from the data pointer.
Require the expected WordCount before reading the byte count. Check each
offset and count against the received SMB length as integers before forming
either pointer. Use subtraction after validating the offset so that the
range checks cannot overflow.11hCVE-2026-99378——
———In the Linux kernel, the following vulnerability has been resolved:
pnfs/blocklayout: Complete a device upcall when the pipe is closed
Once blkmapd has read a whole upcall, rpc_pipe_read() unlinks the
message from every pipe list, so the purges in rpc_pipe_release()
and rpc_close_pipes() no longer reach it. bl_upcall_ops supplies no
.release_pipe callback, and bl_pipe_destroy_msg() returns without
completing the upcall because a downcall is expected to follow. A
daemon that exits between the read and the write therefore strands
its waiter: bl_resolve_deviceid() sleeps in wait_for_completion()
and never returns, and it holds nn->bl_mutex across that wait, so
every later device resolution in the net namespace blocks behind
it.
Add a .release_pipe that completes an upcall blkmapd has consumed
and left unanswered. Completing an upcall retires it, so a message
the framework has already purged is no longer in flight and is not
completed a second time here.11hCVE-2026-99376——
———In the Linux kernel, the following vulnerability has been resolved:
NFSv4/pnfs: Free the netid when draining a data-server address list
nfs4_pnfs_ds_addr_free() releases all three of an address entry's
allocations, but the four sites that drain a decoded list before it
reaches a data server open-code the loop and free only da_remotestr and
the entry, leaking da_netid. Both layout drivers drain that list when
nfs4_pnfs_ds_add() returned a data server already in the cache, and
again on their error exits.
Lift the drain into nfs4_pnfs_ds_addr_list_free() so an address list has
one owner. A striping mount reaches the cached case on nearly every
GETDEVICEINFO, since many deviceIDs name the same data servers.11hCVE-2026-99372——
———In the Linux kernel, the following vulnerability has been resolved:
NFSD: cap the number of listeners accepted in listener_set
nfsd_nl_listener_set_doit() matches each requested listener against the
existing set. The nested loop that does this is O(N * M), where N is the
requested count and M is the existing count. The loop runs under sv_lock
with bottom halves disabled. A userland request with a very large listener
list can therefore spin in atomic context for a long time.
Reject a request that carries more than NFSD_NL_LISTENER_MAX (1024)
entries. The check goes in nfsd_nl_validate_listeners(), before the code
takes any lock. The limit is far above any realistic configuration.
This patch does not cap M. Only the message size bounded N; real sockets
bound M. A listener_set result set is the requested set, so that path also
holds M at the cap, but __write_ports_addxprt() adds two listeners per call
and removes none, so repeated calls can push M past it. The worst case
under sv_lock is therefore 1024 * M, plus 1024 nla_parse_nested() calls.
Both interfaces require CAP_NET_ADMIN.11hCVE-2026-1238946.7 MED—
———VMware Tools for Windows contains a SAML token signature bypass vulnerability.
Affected versions: 13.x.x.x (fixed in 13.1.5.0); 12.3.x (fixed in 12.5.5).9hCVE-2026-99368——
———In the Linux kernel, the following vulnerability has been resolved:
NFSD: Do not send CB_RECALL_ANY to NFSv4.0 clients
deleg_reaper() sends CB_RECALL_ANY to every ACTIVE client holding
delegations, but CB_RECALL_ANY is an NFSv4.1 operation. An NFSv4.0
client's callback service accepts only CB_GETATTR and CB_RECALL, so it
replies OP_ILLEGAL. The decoder maps the unexpected opnum to -EIO, and
nfsd4_cb_done() marks the client's callback channel down.
Nothing brings the channel back. nfsd4_run_cb_work() sets NFSD4_CB_UP
only for a minor version above zero, and the only nfsd4_probe_callback()
call site an NFSv4.0 client reaches is nfsd4_setclientid_confirm(). One
visit from the reaper therefore leaves the channel marked down until the
client re-establishes its clientid. RENEW then returns
NFS4ERR_CB_PATH_DOWN for as long as the client holds delegations.
nfsd4_cb_channel_good() stops returning true, so the client is granted
no further delegations.
Skip clients at minor version zero.11hCVE-2026-99364——
———In the Linux kernel, the following vulnerability has been resolved:
NFSD: Fix out-of-bounds read in the rpc_status dump
nfsd_nl_rpc_status_get_dumpit() loads args->opcnt and
args->ops separately, then walks ops[] before rechecking
rq_status_counter. A COMPOUND that completes between the two loads
runs nfsd4_release_compoundargs(), which zeroes opcnt and points ops
back at the eight-entry inline array. A dump that already sampled an
opcnt of 200 clamps it to the sixteen slots in rq_opnum, then indexes
iops[0..15]. iops is the last member of struct nfsd4_compoundargs and
rq_argp is allocated at exactly that size, so the walk runs off the
end of the allocation. The trailing recheck discards the sampled data,
but the read has already happened. NFSD_CMD_RPC_STATUS_GET carries
no GENL_ADMIN_PERM, so an unprivileged local user can repeat the dump
against a busy server until it lands in the window.
Sample opcnt and ops into locals, then finish the counter recheck
before dereferencing ops. An unchanged counter means both came from the
same COMPOUND, where opcnt cannot exceed what ops holds.11hCVE-2026-99363——
———In the Linux kernel, the following vulnerability has been resolved:
NFSD: Map flex file layout IDs through the request's user namespace
nfsd4_ff_proc_layoutget() and nfsd4_ff_encode_layoutget() translate
the file's owner and group with init_user_ns, but every other identity
nfsd places on the wire goes through nfsd_user_namespace(). When the
transport carries a credential from a non-initial user namespace, the
flex file layout reports host-global IDs. The client copies those IDs
into the AUTH_SYS credential it presents to the data server, and
svcauth_unix_accept() resolves that credential in the transport's
namespace, so data server I/O runs under an identity unrelated to the
file's owner.
Switching to the request's namespace introduces a second hazard.
from_kuid() returns (uid_t)-1 when the target namespace has no
mapping for the owner, and the IOMODE_READ arm adds one to that
result to derive an identity for which the data server denies
writes. The addition would wrap to zero, handing the client uid 0
instead of an identity distinct from the owner.
Translate both IDs in nfsd4_ff_proc_layoutget(), which has the
svc_rqst, and carry the wire values in struct pnfs_ff_layout.
from_kuid_munged() substitutes overflowuid for an unmapped owner and
thus never returns (uid_t)-1, so the increment cannot wrap to zero.11hCVE-2026-99359——
———In the Linux kernel, the following vulnerability has been resolved:
NFSD: validate transport name in listener_set before serv creation
nfsd_nl_listener_set_doit() holds nfsd_mutex for the whole listener
teardown and rebuild. The code checks NFSD_A_SOCK_TRANSPORT_NAME for
presence only, and not for content. An arbitrary name therefore reaches
svc_xprt_create_from_sa(). There, a name that matches no registered class
calls request_module("svc%s", name). That call is a TASK_KILLABLE usermode
helper upcall, and it runs under nfsd_mutex.
Check the name against the classes that NFSD can create: tcp, udp and
rdma. The check goes in nfsd_nl_validate_listeners(), which runs before
the code takes nfsd_mutex. The rejection names the offending attribute
through extack, since -EPROTONOSUPPORT on its own does not say which
entry carried the bad name.
This narrows the upcall. It does not remove it. NFSD accepts "rdma"
without a condition, so on a kernel that does not build svcrdma the name
still reaches request_module("svcrdma") under nfsd_mutex. That is
necessary for the modular case, where the autoload is legitimate.11hCVE-2026-99357——
———In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: Copy the deferred RPC Call from the head buffer
svc_defer() snapshots the RPC Call for replay once a pending cache
upcall resolves. It copies the Call starting (rq_arg.len -
head[0].iov_len) bytes before head[0].iov_base, a back-up that once
covered a transport header. No transport has had one since commit
983084b2672c ("SUNRPC: Remove svc_rqst::rq_xprt_hlen"), so the two
lengths are meant to be equal.
An RPCSEC_GSS Call breaks that assumption. Unwrapping the integrity
service truncates rq_arg.len by the length of the trailing checksum,
and unwrapping the privacy service leaves rq_arg.len short by an
amount the client sets with trailing bytes after the wrap token.
Neither adjusts head[0].iov_len. Both lengths are size_t, so the
subtraction underflows and the copy starts past head[0].iov_base.
Every deferred integrity Call replays a shifted snapshot.
A deferred replay skips GSS verification, so a shifted snapshot runs
as an authenticated Call. With the privacy service the offset is
client-chosen. A forged Call placed in that window, naming another
user's GSS context handle, runs under that identity.
Copy the Call from head[0].iov_base. Refuse to defer a Call whose
length runs past the head buffer, so the copy cannot read out of
bounds.11hCVE-2026-99356——
———In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: Do not credit control-record octets to the RPC stream
svc_tcp_sock_recv_cmsg() receives up to two octets into a local
buffer, and returns that count for any record type other than
TLS_RECORD_TYPE_ALERT. Nothing reached the caller's buffer, but
svc_tcp_read_marker() adds the count to sk_tcplen and
svc_tcp_read_msg()'s caller adds it to sk_datalen. The RPC stream
advances over octets it never received. The fragment marker is
assembled from stale sk_marker octets. The message body comes from
pages nothing wrote.
A conforming client reaches this. RFC 8446 Section 4.6.3 lets either
peer send KeyUpdate once it has sent its Finished, and svcsock has no
rekey path. kTLS leaves the partially consumed record on ctx->rx_list,
so the body drains two octets per svc_tcp_recvfrom() call. Each pair
is credited the same way.
Return -EAGAIN for a record that is not an alert. That is what
svc_tcp_sock_process_cmsg()'s default arm returned before the receive
moved into a local buffer.11hCVE-2026-1099205.5 MED—
———Use of uninitialized memory when processing certain font files in X.Org libXfont before 2.0.10 could be used by authenticated attackers to crash the X server.5hCVE-2026-102770——
———Improper neutralization of special elements in data query logic (Cypher injection) in the fulltext and vector index query generator of the sharded property database in Neo4j Enterprise Edition 2026.07.0 before 2026.10.0 allows an authenticated user holding ACCESS, CREATE INDEX and NAME MANAGEMENT privileges to inject Cypher that is accepted for execution on a property shard, in the session of any user who later queries the index, via a crafted index name containing a single quote. The impact is bounded by the privileges of the querying user.9hCVE-2026-1238927.2 ALT—
———SDDC Manager contains an authenticated command-injection vulnerability due to improper sanitization of user-supplied input.
Affected versions: 9.1.x.x (fixed in 9.1.1.0200); 9.0.x.x (fixed in 9.0.2.0100); 5.x (fixed in 5.2.5).9hCVE-2026-99352——
———In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: trace an accepted transport before publishing it
svc_handle_xprt() publishes a newly accepted transport before tracing
it. svc_add_new_temp_xprt() places the transport on sv_tempsocks and
clears XPT_BUSY, so another nfsd thread can dequeue it at once. If the
peer has already closed the connection, that thread runs
svc_delete_xprt(), which drops the list reference, the only reference
the new transport holds. trace_svc_xprt_accept() then reads the
transport's addresses and network namespace from freed memory.
Before publication the accepting thread owns the transport
exclusively: XPT_BUSY is still set from svc_xprt_init() and the
transport is on no list. Emit the tracepoint there.
[ cel: trace before publication instead of taking an extra reference ]11hCVE-2026-99348——
———In the Linux kernel, the following vulnerability has been resolved:
afs: Fix afs to abort the rxrpc call on send error
Fix afs_send_empty_reply() and afs_send_simple_reply() to always try to
abort the rxrpc call rather than just aborting on -ENOMEM and otherwise
abandoning it. If the call is already complete due to network failure or a
received abort, this will do nothing.
Also make afs_make_call() always abort on send error; again, it does
nothing if the rxrpc call is already dead.11hCVE-2026-99347——
———In the Linux kernel, the following vulnerability has been resolved:
ALSA: x86: hdmi: fix chmap array missing terminator entry
had_build_channel_allocation_map() allocates a single struct
snd_pcm_chmap_elem via kzalloc() and stores it as
intelhaddata->chmap->chmap. struct snd_pcm_chmap.chmap is expected to
be a zero-terminated array (see snd_pcm_std_chmaps[]), but
had_register_chmap_ctls() never overrides the TLV callback installed
by snd_pcm_add_chmap_ctls(), so the generic pcm_chmap_ctl_tlv() from
ALSA core is left in place.
pcm_chmap_ctl_tlv() is reachable by any local user via
SNDRV_CTL_IOCTL_TLV_READ on the "Playback Channel Map" control and
walks the array with "for (map = info->chmap; map->channels; map++)".
Since the driver's single element is never terminated, this walks
past the allocation. The same pointer is also freed on hot-unplug and
rebuilt on hot-plug under intelhaddata->mutex, while the TLV callback
runs under card->controls_rwsem without that mutex, so the walk can
also race a concurrent free of the array.
Fix this by allocating a second, zeroed element so the array is
properly terminated, and by dropping the inherited TLV callback
entirely at registration time, since the driver never implements one
of its own.11hCVE-2026-99345——
———In the Linux kernel, the following vulnerability has been resolved:
KVM: nSVM: Reject KVM_SET_NESTED_STATE if L1 has EFER.LMA=1 && EFER.LME=0
Reject KVM_SET_NESTED_STATE if the incoming L1 host state has what is
effectively an impossible EFER combination of LMA=1 but LME=0, i.e. if the
state says long mode is active but not enabled. Unlike VMX, SVM doesn't
have an explicit consistent check for the illegal combination; presumably
hardware simply ignores EFER.LMA if EFER.LME=0.
Unfortunately, KVM doesn't ignore EFER.LMA in this case and consumes the
illegal state when constructing the shadow MMU for L2. E.g. if userspace
also clears CR4.PAE, then kvm_calc_cpu_role() will compute a role with 4 or
5 levels of paging, but shadow_mmu_init_context() will wire up the MMU to
use the paging32 template, which maxes out its levels at 2.
Note, the "real badness" is effectively the same as what happened with the
nVMX bug fixed by commit 112e66017bff ("KVM: nVMX: add missing consistency
checks for CR0 and CR4"). Unfortunately, the sanity check added by commit
72e2fb24a0b0 ("KVM: x86/mmu: Bug the VM if a vCPU ends up in long mode
without PAE enabled") doesn't work for this case, since L2 state is active
at the time of the page fault, but it's L1 that has the bad state.11hCVE-2026-99565——
———In the Linux kernel, the following vulnerability has been resolved:
ksmbd: wait for negotiation before receiving another PDU
The receive thread queues a request and can read the next PDU before
the negotiation worker finishes. While need_neg is set, the next PDU
can cause ksmbd_init_smb_server() to replace conn->ops. A pipelined
SMB2 request can therefore make the worker handle an earlier, shorter
SMB1 request with SMB2 operations and read beyond its buffer.
An SMB1 multi-protocol negotiate may be followed by an SMB2 NEGOTIATE
that changes conn->ops again. Wait for work queued while the connection
is new or needs negotiation to complete before reading another PDU.
This keeps the operations stable for both stages of negotiation without
changing when need_neg is cleared.11hCVE-2026-1238918.1 ALT—
———SDDC Manager contains an SQL-injection vulnerability due to improper sanitization of user-supplied input.
Affected versions: 9.1.x.x (fixed in 9.1.1.0200); 9.0.x.x (fixed in 9.0.2.0100); 5.x (fixed in 5.2.5).9hCVE-2026-99343——
———In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/mmu: Bug the VM if KVM attempts to walk more levels than the MMU has
Extend the "EFER.LMA && !CR4.PAE" check, which exists largely to guard
against KVM configuring a paging32 MMU with more than 2 levels of paging,
with a very explicit check for exactly that: that KVM isn't trying to walk
more levels of paging than the MMU template provides. I.e. harden KVM
against all bugs that would cause KVM to generates accesses beyond the
bounds of guest_walker's arrays, regardless of how KVM ended up with the
misconfigured MMU.
Note, don't use w->cpu_role.base.level directly as the paging64 template
only provides two levels of page tables for PAE paging on 32-bit hosts, and
handles the third level by manually emulating the PDPTR access.11hCVE-2026-99340——
———In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Take SRCU in kvm_zap_gfn_range()
kvm_zap_gfn_range() walks memslots and rmaps and may drop mmu_lock to
reschedule. Callers that do not already hold kvm->srcu (or slots_lock)
can race with memslot deletion: synchronize_srcu_expedited() does not
wait, kvm_free_memslot() frees the old slot and its rmap, and the zap
resumes on freed memory.
The VFIO noncoherent-DMA path hits this by zapping the entire GPA
space without SRCU. KASAN reported:
BUG: KASAN: vmalloc-out-of-bounds in slot_rmap_walk_next+0x82/0x1c0
Read of size 8 at addr ffffc900005c1008
Call Trace:
slot_rmap_walk_next+0x82/0x1c0
__kvm_rmap_zap_gfn_range+0x17a/0x280
kvm_zap_gfn_range+0x2a6/0x6a0
kvm_vfio_set_attr+0x576/0x770
kvm_device_ioctl+0x1ff/0x3b0
Take SRCU inside kvm_zap_gfn_range() so every caller is covered.
Nesting with an existing kvm->srcu critical section is fine; the
helper uses a local index. Drop the now-redundant SRCU pair from
__kvm_set_or_clear_apicv_inhibit().11hCVE-2026-99337——
———In the Linux kernel, the following vulnerability has been resolved:
KVM: TDX: Enable Bus Lock VM exit
Enable Bus Lock VM exit functionality for TDX guests.
Bus Lock VM exit is an existing feature supported by KVM. Userspace can
enable Bus Lock VM exit through KVM_BUS_LOCK_DETECTION_EXIT when it's
reported as supported. However, KVM reports the support of this CAP
just based on the hardware capability but doesn't differentiate between
VMX and TDX. This leads to the issue that userspace can enable this cap
for TDX guests without getting an error, but the feature is not actually
enabled because KVM doesn't call the TDX module API to program the
relevant TD VMCS fields.
Enable Bus Lock VM exit for TDX guests by programming the
BUS_LOCK_DETECTION control in the TD VMCS and by adding the exit handler.
Note, there is no enumeration bit for this feature by TDX module because
all TDX modules support it and allow to set the TD VMCS as long as the
hardware supports the feature.11hCVE-2026-99334——
———In the Linux kernel, the following vulnerability has been resolved:
KVM: PPC: Book3S HV: Add preempt_disable() around virtual-mode HPTE bit-lock users
kvmppc_hv_find_lock_hpte() requires virtual-mode callers to run with
preemption disabled, because it can return with HPTE_V_HVLOCK still held
until the caller later unlocks the HPTE. Existing virtual-mode callers
in book3s_64_mmu_hv.c already follow that rule.
Two virtual-mode call paths do not:
1. kvmppc_handle_exit_hv() calls kvmppc_hpte_hv_fault() for hash-mode
data-side and instruction-side faults after guest exit, with
preemption already enabled. kvmppc_hpte_hv_fault() calls
kvmppc_hv_find_lock_hpte() directly.
2. kvmppc_pseries_do_hcall() executes virtual-mode handlers for HPT
hcalls via kvmppc_pseries_do_hpt_hcall() with preemption enabled.
The handlers for H_ENTER, H_REMOVE, H_READ, H_CLEAR_MOD, H_CLEAR_REF,
H_PROTECT, and H_BULK_REMOVE spin on try_lock_hpte() or lock_rmap(),
and H_ENTER also reaches kvmppc_do_h_enter(), which uses
arch_spin_lock() on kvm->mmu_lock. That raw lock choice is
intentional because kvmppc_do_h_enter() is also used by real-mode
callers, so the correct fix is to establish the proper preemption
context at the virtual-mode caller boundary.
If a vCPU thread is preempted while holding HPTE_V_HVLOCK, any other
thread on the same CPU trying to acquire the same bit-lock can spin
indefinitely. The same applies to lock_rmap() users and to the H_ENTER
path while holding the raw mmu_lock.
Fix this by adding preempt_disable()/preempt_enable() pairs around the
two kvmppc_hpte_hv_fault() call sites in kvmppc_handle_exit_hv(), and
around the kvmppc_pseries_do_hpt_hcall() invocation in
kvmppc_pseries_do_hcall(). Targeting only the HPT hcall helper avoids
wrapping non-HPT hcalls (such as H_RTAS, H_CONFER, H_REGISTER_VPA) that
perform page faults, blocking memory allocations, or context switches.11hCVE-2026-99333——
———In the Linux kernel, the following vulnerability has been resolved:
HID: amd_sfh: Use report type from request node
Use report type from request node while sending feature and input reports
to HID core. The cli_data report type array is never assigned and
feature reports are sent as input reports.11hCVE-2026-99329——
———In the Linux kernel, the following vulnerability has been resolved:
HID: mcp2221: always initialize and cancel init_work
The writable gpio_mode_enforce parameter can change between probe and
remove.
If it changes from false to true after probe, remove skips cancellation
of init_work. Pending or running work can then access devm-managed
driver state after teardown. Changing it from true to false can make
remove cancel an uninitialized delayed work item.
Initialize init_work whenever IIO is reachable and cancel it
unconditionally on remove. Keep the parameter check only for scheduling
the initialization.
The false-to-true cancellation gap was previously reported by Sashiko.
We also encountered this issue during our static-analysis research.11hCVE-2026-99328——
———In the Linux kernel, the following vulnerability has been resolved:
HID: picoLCD: check for fb_deferred_io_init() error
fb_deferred_io_init() allocates deferred I/O state, populating
info->fbdefio_state, or leaving it NULL if an error occurs.
Currently picolcd_init_framebuffer() ignores its return value.
Therefore if an error arises in fb_deferred_io_init() (for instance, due
to an allocation failure) info->fbdefio_state is left NULL.
When the file is subsequently opened, fb_open() will dereference a NULL
pointer (calling fb_deferred_io_open()).
Fix this by checking for the error.
Also correct cleanup ordering - defio is initialised after the sysfs file,
so cleanup defio first.11hCVE-2026-99324——
———In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix out-of-bounds read when padding the final compound response
Compound response handling pads the last response of a compound to an
8-byte boundary by growing the final iov and the RFC1002 length.
smb2_allocate_rsp_buf() allocates exactly response_sz. A command can
fill the response buffer to within 7 bytes of its end, for example a
QUERY_INFO whose output is bounded only by the space left. The padding
can then run past the allocation, and ksmbd_tcp_writev() reads those
bytes when it sends the response.
BUG: KASAN: slab-out-of-bounds in _copy_from_iter+0x744/0x10e0
Call Trace:
_copy_from_iter+0x744/0x10e0
tcp_sendmsg_locked+0x2290/0x3f80
ksmbd_tcp_writev+0x10c7/0x1ab0 [ksmbd]
Allocate room for the padding when the request is a compound, as
smb2_read() and smb2_read_pipe() do for their payloads. response_sz is
unchanged, so commands still fill only up to it, and kvzalloc() zeroes
the padding.11hCVE-2026-99321——
———In the Linux kernel, the following vulnerability has been resolved:
rust_binder: wake epoll on self-work queued to poll thread
When a thread pushes work to its own todo list, InnerThread::push_work()
returns PushWorkRes::OkNotifyPoll if the thread uses epoll, but four
call sites in thread.rs discard this return value. As a result, a
non-blocking BC_* write that enqueues work onto the calling thread's
todo list without also reading will not wake epoll. Check the return
value and call self.process.notify_poll(false) when
PushWorkRes::OkNotifyPoll is returned.
This is similar to commit 97830f3c3088 ("binder: signal epoll threads of
self-work"), but in C Binder pending thread work also prevented
subsequent process work from waking epoll, causing a permanent hang,
which is not the case in Rust Binder. This means that in practice, it
merely delays notifications rather than completely failing to send them.11hCVE-2026-1331903.7 BAJ—
———MISP, a threat intelligence sharing platform, contains a vulnerability in its cryptographic key management for protected (PGP-signed) events. Two related defects allow a revoked PGP key to remain effective for signing and validating protected events.
First, the validateProtectedEvent() method in the CryptographicKey model iterates over the event's stored cryptographic keys to verify a PGP signature but does not check the revoked flag on each key. A key explicitly marked as revoked is still used to validate signatures, meaning an entity whose key has been revoked can continue to sign protected events and have them accepted by the MISP instance.
Second, the captureCryptographicKeyUpdate() method, responsible for synchronizing the key list when a sync user edits a protected event, contained a query bug (find('first') instead of find('all')) that caused only the first stored key to be considered. As a result, revocations of additional keys were never persisted, keys absent from the pushed list were not removed, and entries lacking an explicit fingerprint were mismatched and incorrectly deleted. Additionally, the revocation logic did not enforce the invariant that a revocation, once stored, is never lifted by subsequent pushes.
A third minor issue: a signed protected event submitted without any cryptographic keys triggered an unhandled 500 error rather than a proper rejection response.
Preconditions: the attacker must be an authenticated sync user with permission to add or edit protected events on the MISP instance. The impact is that revoked keys retain signing authority, key revocations propagated by sync partners are silently dropped, and the integrity of the protected-event trust chain is compromised. In a multi-instance MISP deployment, events signed by revoked keys can propagate to other instances, extending the integrity impact across the sync network.11hCVE-2026-133184——
———MISP contains an authorization and input-validation flaw in its event push mechanism. When a user with push permissions initiates a push of events to a remote MISP instance, the system fails to enforce two critical checks: (1) it does not verify that an event is published before including it in the push, allowing unpublished (i.e., not yet publicly shared) events to be transmitted to the remote server; and (2) it does not verify that the pushing user has read access to the event, causing events the user cannot fetch to be sent as empty event shells, thereby disclosing the existence and metadata of events the user is not authorized to view. Additionally, the remote server's reply selecting which offered events to accept is used without validating that the selected identifiers actually correspond to events in the offered set, potentially allowing the remote to reference events outside the intended scope. The vulnerability requires an authenticated user with push permissions on the source MISP instance and a configured push target. The security impact is unauthorized disclosure of confidential threat-intelligence data (unpublished events and events restricted by user permissions) to a remote MISP instance that should not receive them.6hCVE-2026-133183——
———MISP contains an authorization flaw in the handling of remote pull and feed operations. When a non-internal pull or a feed processes incoming data and encounters an existing sharing group, the application did not verify that the remote server's organization was actually a member of that sharing group before allowing the group's metadata to be updated. The captureRemote mechanism previously stored only a boolean flag indicating whether the link was internal, and the authorization check in captureSGExisting relied solely on that flag. For non-internal pulls and feeds, the check was insufficient: a remote server whose organization was not a member of the target sharing group could still cause the group record to be modified (for example, altering the local flag, the modified timestamp, or other group properties). A feed, which has no associated server organization at all, could likewise trigger an update to an existing sharing group's metadata. The security impact is an integrity violation: an authenticated remote entity with sync or feed privileges can alter sharing group attributes that govern how data is distributed among organizations, potentially changing the local flag or other access-relevant properties of groups it does not belong to. The vulnerability requires an authenticated user with the ability to initiate a pull or feed (a sync user or feed administrator) and a target sharing group that exists on the local instance. No unauthenticated access or user interaction is required.11hCVE-2026-133177——
———MISP contains an authorization flaw in the sharing group capture logic. When a sharing group is re-captured with a newer modified timestamp and an updated roster, the application unconditionally overwrote the type, nationality, sector, and contacts fields of every organisation listed in the roster, including the host organisation. This behaviour was reachable by any user holding the perm_sync role, and additionally by any external server pulled from or any feed fetched, because those operations execute with the privileges of the site administrator who initiated them. As a result, a low-privileged sync user or a malicious/compromised external feed or pull source could silently corrupt organisation records on the receiving MISP instance without any site-admin or internal-sync authorization. The vulnerability does not disclose data or affect availability; the impact is limited to integrity of organisation metadata (type, nationality, sector, contacts). The fix restricts organisation detail updates to internal sync operations (pulls over links flagged as internal, or senders holding perm_sync_internal) and site administrators; all other sync, pull, and feed operations may only match existing organisations by UUID or create new ones, without modifying their stored details.11hCVE-2026-1331736.5 MED—
———WatchAlert 2.0.0 through 3.9.20 contains an insecure direct object reference vulnerability in the /api/w8t/datasource/dataSourceGet endpoint that lets authenticated users read other tenants' datasources because lookups omit tenant_id filtering. Tenant members with datasource view permission can request another tenant's datasource ID to obtain basic auth passwords, AWS and Alibaba Cloud keys, and Kubernetes kubeconfigs.7hCVE-2026-1331728.8 ALT—
———Cozy Cloud cozy-stack 1.6.62 before 1.6.69 contains an authorization bypass vulnerability in the shared-drive move handler that allows authenticated users to access other instances' files. Attackers owning a shared drive can name another instance's domain and any directory ID as the move source to copy and delete the victim's file tree.11h