Vulnerabilidades explotables hoy
418,259en la vista actual
Score único combinando CVSS, membresía KEV y EPSS. Cada CVE con su ficha propia — timeline desde publicación hasta explotación activa.
En catálogo KEV1,786
Nuevos KEV · 24H0
Exploit Today ≥ 701,715
Distribución · última ventana
- Crítico4,719
- Alto18,240
- Medio17,989
- Bajo1,975
Filtros
Ventana
Severidad
Filtros
CVECVSSEPSSKEVRExplotTítuloVis.
CVE-2026-1331617.5 ALT—
———### Summary ui
With `strip_ansi=True`, Pydantic AI Harness's `ToolOutputLimits` capability removes ANSI escape sequences from tool output with a pattern that takes time quadratic in the length of a line. A tool result of a few hundred kilobytes, crafted with many unterminated escape sequences, can occupy the event loop for tens of seconds to minutes, delaying every other request and agent run in the process.
### Details
This affects applications that set `strip_ansi=True` on `ToolOutputLimits` (named `OverflowingToolOutput` before 0.13.0) and run tools whose output an attacker can influence, such as shell commands, file reads, fetched pages or MCP servers. Stripping runs on the event loop before the capability reduces the output, so its own size limits do not bound it.
The assumed attacker can place text in content a tool returns.
### Mitigation
Upgrade `pydantic-ai-harness` to 0.70.0 or later. Until then, leave `strip_ansi` at its default, `False`.
On Pydantic AI v1, the harness cannot be upgraded past 0.4.0. Upgrade to Pydantic AI v2 and `pydantic-ai-harness` 0.70.0, or leave `strip_ansi` off.11hCVE-2026-129916——
———In Eclipse Ditto versions 3.9.0 to 3.9.8, the resolved policy view (`GET /api/2/policies/{policyId}?policy-view=resolved`) does not restrict merged policy content to what the caller may read in the policy it originates from. Imported and namespace-root entries are returned in full as soon as the caller may read any part of them in the source policy, entries of transitive imports and of the imports of namespace-root policies are only checked against the intermediate policy, and content copied into an entry by `references`, also from another entry of the same policy, is not checked against the referenced entry. An authenticated caller with READ on a policy can therefore read subjects, resources and granted/revoked permissions of policy entries that are hidden from them, including by explicit revokes, when reading the originating policy directly.6hCVE-2026-99563——
———In the Linux kernel, the following vulnerability has been resolved:
smb: smbdirect: release failed pending sockets of a listener
A child of a listener only left the listen.pending or listen.ready
list via smbdirect_socket_accept() or when the listener was
destroyed. So every connection that failed before it was accepted
(negotiate timeout, peer disconnect, invalid negotiate request, ...)
stayed on the list and counted against the backlog until the listener
was destroyed. After about backlog (10 for ksmbd) such connections
smbdirect_listen_connect_request() rejected every new connection with
-EBUSY, so an unauthenticated peer was able to permanently stop
ksmbd from accepting SMB-Direct connections.
Now a failed child moves itself to a new listen.orphaned list at the
end of smbdirect_socket_cleanup_work(), after the disconnect was
started, and queues listen.purge_orphaned_work, which releases it
with smbdirect_socket_release(), without holding the listener's
rdma_lock_handler() lock, in the same way smbdirect_socket_destroy()
does for the remaining children. Orphaned sockets still count against
the backlog until they are released.
sc->accept.listener is now only changed under listener->listen.lock
and whoever clears it is responsible for releasing the socket:
smbdirect_socket_accept(), purge_orphaned_work or the destroy of the
listener.
In order to make that work:
- a struct smbdirect_socket that is a listener is now freed via
kfree_rcu(), so that a child can dereference sc->accept.listener
under rcu_read_lock(), even if the listener is released concurrently.
- smbdirect_listen_connect_request() adds nsc to the listen.pending
list and sets nsc->accept.listener before it calls
smbdirect_accept_connect_request(), and always returns 0 so the
rdma_cm core keeps the connection id and nsc owns it. On a non-zero
return it schedules nsc's teardown with
smbdirect_socket_schedule_cleanup(), which orphans it off the
listener so that purge_orphaned_work releases it; nsc destroys its
own connection id with rdma_destroy_id() in that teardown. The
teardown has to be deferred because the rdma_cm core holds nsc's
id_priv->handler_mutex across the handler, so nsc->rdma.cm_id must
not be destroyed synchronously from here. That same handler_mutex
(and the listener's) also guarantees nsc can't go away under us,
so setting the listener before the call is safe and lets a failure
orphan nsc.
- smbdirect_accept_negotiate_recv_work() no longer moves a socket to
the ready list if it already failed or no longer belongs to the
listener. Every accepting socket has a listener, so if
sc->accept.listener is already cleared, it no longer sends a
negotiate response, as the socket is about to be released.
- smbdirect_socket_destroy() of the listener disables
purge_orphaned_work and also releases the orphaned sockets.11hCVE-2026-129699——
———In Eclipse Ditto versions 2.0.0 to 3.8.14 and 3.9.0 to 3.9.8, the authorization check for JSON merge patch commands on Things (HTTP `PATCH` / Ditto Protocol `merge`) does not check permissions for fields
deleted or set to an empty object by the patch: fields with a `null` value or an empty object value (`{}`) are skipped by the check, and Ditto's regex-based key deletion with the documented `{{
~<regex>~ }}` syntax is not recognized as a deletion. An authenticated user with WRITE permission on any part of a Thing can therefore delete other attributes, features and the definition of that Thing,
or overwrite or create fields as empty objects, including parts the policy revokes or never grants WRITE on.
-->6hCVE-2026-129496——
———Timezone cache use-after-free can lead to remote code execution.
In non-thread-safe builds, a diagnostic written to a file-based error_log during module startup, for example for an invalid date.timezone value or a session configuration warning, causes the timezone cache to be allocated in startup memory that is freed while a reference to it is kept. A diagnostic raised early in the first request of a worker, such as the max_input_vars warning, then accesses the freed cache. On such a deployment an unauthenticated remote attacker can crash PHP-FPM, Apache mod_php or CGI workers with a crafted request. Arbitrary code execution may be possible and has been demonstrated with known memory addresses.
This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.4hCVE-2026-129481——
———Use-after-free after interrupted session shutdown.
The session extension records the filename of the executing script when a session starts. If a fatal error occurs in an application callback while the session variables are destroyed at shutdown, such as stream_close() of a user-defined stream wrapper, the pointer is retained after the request memory is freed, and a later request handled by the same worker can free the stale string. An attacker who can trigger such a failing cleanup may crash the worker or corrupt memory; code execution has not been demonstrated. This requires the filename to be allocated in request memory, for example when the script is not cached by OPcache.
This issue affects PHP versions 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.4hCVE-2026-129291——
———PHP-FPM epoll use-after-free can lead to local privilege escalation.
When catch_workers_output is enabled and the epoll event backend is used, the PHP-FPM master can close a worker's output pipe in fpm_child_close() without removing the associated event, and the delayed cleanup can free the worker record while its epoll registration is still active. A later event is then dispatched through a pointer into freed memory. A local attacker who can execute PHP code in an FPM worker can crash the master or execute code with its privileges, commonly root. catch_workers_output is disabled by default but enabled in the official PHP-FPM Docker images.
This issue affects PHP versions from 8.1.20 through 8.1.34, from 8.2.7 before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.4hCVE-2026-99562——
———In the Linux kernel, the following vulnerability has been resolved:
ksmbd: reject FSCTL_SET_ZERO_DATA on a directory handle
An authenticated client with a writable tree connection can open a
directory with FILE_WRITE_DATA and send FSCTL_SET_ZERO_DATA on that
handle. The handler only checks fp->daccess & FILE_WRITE_DATA_LE, but on
a directory FILE_WRITE_DATA is the legitimate add-file right, so the
check passes. ksmbd_vfs_zero_data() then calls kernel_write() on the
directory file, which has no FMODE_WRITE, and __kernel_write_iter()
hits WARN_ON_ONCE(!(file->f_mode & FMODE_WRITE)), panicking a
panic_on_warn kernel.
Before commit 25e414db7033 ("ksmbd: report holes in allocated range
queries") the dense-file path used vfs_fallocate(), which rejects
directories with -EISDIR. The kernel_write() loop that replaced it has
no such check. Reject a directory handle in ksmbd_vfs_zero_data() before
writing, as ksmbd_vfs_write() already does for SMB2_WRITE.
WARNING: fs/read_write.c:608 at __kernel_write_iter+0x74b/0x8c0
Workqueue: ksmbd-io handle_ksmbd_work
Call Trace:
kernel_write+0x1ef/0x4d0
ksmbd_vfs_zero_data+0x413/0x590
smb2_ioctl+0x21fa/0x66a0
handle_ksmbd_work+0x61b/0x1ff011hCVE-2026-129289——
———PHP-FPM request smuggling through an unread HTTP request body.
PHP does not discard the unread part of an HTTP request body at request shutdown when the application has opened php://input without reading it to the end. When the front end reuses backend connections, which is not the default in nginx or Apache (for example nginx with fastcgi_keep_conn on, or Apache mod_proxy_fcgi with enablereuse=on), PHP-FPM can parse the leftover bytes as a new FastCGI request. An unauthenticated remote attacker can use a single crafted multipart/form-data request to forge a backend request with chosen parameters such as SCRIPT_FILENAME, REMOTE_ADDR and PHP_ADMIN_VALUE, which can lead to execution of attacker-controlled PHP code. With LSAPI, subsequent requests on the connection can be disrupted.
This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.4hCVE-2026-129182——
———Use-after-free via repopulation of last_fatal_error_backtrace global after shutdown.
A fatal error raised while modified INI settings are restored during request shutdown can repopulate the stored fatal error backtrace after the executor has been cleaned up. The request memory is then freed, and a diagnostic emitted before executor initialization in a later request handled by the same PHP-FPM or mod_php worker can access the stale backtrace. The shutdown error requires per-path configuration of max_memory_limit, or of zlib.output_compression together with output_handler (which .user.ini can also set). The early diagnostic requires Apache per-directory configuration or, for PHP-FPM, a PHP_VALUE or PHP_ADMIN_VALUE parameter sent by the front end. This can cause memory corruption and worker crashes, and may allow remote code execution.
This issue affects PHP versions 8.5.* before 8.5.13.4hCVE-2026-99560——
———In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: fix reset panic caused by the WM2 rx irq mask
mt7925_irq_map sets wm2_complete_mask, but mt7925_dma_layout has no
tx done ring, so the MT_RXQ_MCU_WA queue and its NAPI are never set up.
On a chip reset, mt7925e_mac_reset() calls napi_disable() on that NAPI
and crashes:
BUG: kernel NULL pointer dereference, address: 0000000000000a40
Workqueue: mt76 mt7925_mac_reset_work [mt7925_common]
RIP: 0010:mutex_lock+0x1c/0x50
Call Trace:
napi_disable+0x1d/0x50
mt7925e_mac_reset+0x327/0x420 [mt7925e]
mt7925_mac_reset_work+0x9a/0x1a0 [mt7925_common]
Remove the WM2 mask from mt7925_irq_map and from
MT7925_INT_RX_DONE_ALL.11hCVE-2026-127960——
———Denial of service through folded HTTP response headers.
The HTTP stream wrapper joins each continuation line of a folded response header to the accumulated value by allocating a new string and copying the whole value, so a response with many short continuation lines takes disproportionate CPU time to parse. An attacker who controls an HTTP or HTTPS response fetched through file_get_contents(), fopen() or other stream functions, by making the application request a chosen URL or by influencing a server it already contacts, can keep PHP workers busy. Repeated or concurrent requests can cause a denial of service.
This issue affects PHP versions from 8.1.32 through 8.1.34, from 8.2.28 before 8.2.36, from 8.3.18 before 8.3.37, from 8.4.5 before 8.4.28 and 8.5.* before 8.5.13.4hCVE-2026-1238936.7 MED—
———SDDC Manager contains a local privilege-escalation vulnerability.
Affected versions: 9.1.x.x (fixed in 9.1.1.0200); 9.0.x.x (fixed in 9.0.2.0100); 5.x (fixed in 5.2.5).9hCVE-2026-99558——
———In the Linux kernel, the following vulnerability has been resolved:
blk-crypto: fix NULL deref and UAF in __blk_crypto_evict_key()
Sashiko reported a possible NULL pointer dereference, triggered by the
following flow:
dm-inlinecrypt ctor # first use of the fallback
├─ blk_crypto_init_key() # succeeds, ctx->key.size != 0
├─ blk_crypto_start_using_key()
│ ├─ hw-wrapped key: -EOPNOTSUPP
│ │ # profile never allocated (NULL)
│ └─ raw key: fallback_start_using_mode()
│ └─ blk_crypto_fallback_init() fails
│ └─ kfree(profile) # not NULLed
├─ goto bad
└─ inlinecrypt_dtr() # evicts whenever key.size is set
└─ blk_crypto_evict_key()
└─ blk_crypto_config_supported_natively() = false
└─ blk_crypto_fallback_evict_key()
└─ __blk_crypto_evict_key(blk_crypto_fallback_profile)
└─ profile->num_slots # BOOM!!!
This issue can be reproduced using the following commands:
dd if=/dev/zero of=/tmp/backing bs=1M count=64
LOOP=$(losetup -f --show /tmp/backing)
SZ=$(blockdev --getsz $LOOP)
KEY=$(head -c 64 /dev/urandom | od -An -tx1 | tr -d ' \n')
dmsetup create ic --table "0 $SZ inlinecrypt aes-xts-plain64 \
$KEY 0 $LOOP 0 1 keytype:hw-wrapped"
And the following oops is triggered:
==================================================================
blk-crypto: loop0: no support for wrapped keys
Oops: general protection fault, probably for non-canonical address
0xdffffc000000000b: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000058-0x000000000000005f]
CPU: 5 UID: 0 PID: 901 Comm: dmsetup 7.3.0-rc3 #1 PREEMPT(lazy)
RIP: 0010:__blk_crypto_evict_key+0x2e/0x3b0
Call Trace:
blk_crypto_evict_key+0x24c/0x320
inlinecrypt_dtr+0xf6/0x160
inlinecrypt_ctr+0x2d3/0xbd0
dm_table_add_target+0x661/0xf40
table_load+0x1c4/0x490
ctl_ioctl+0x32f/0x5f0
dm_ctl_ioctl+0xe/0x20
==================================================================
dm-inlinecrypt is the only caller that can evict a key that was never
started, as fscrypt frees such a key without evicting it.
Fix this by returning early from blk_crypto_fallback_evict_key() when
tfms_inited[] is not set for the key's mode. tfms_inited[] is only set
after blk_crypto_fallback_init() has successfully initialized the
profile, so the crash above is no longer reachable.
The bug has been latent since commit c984ff1423ae ("blk-crypto:
dynamically allocate fallback profile") was merged in v6.5, and only
became actually triggerable when commit e7f57d2c47e2 ("dm-inlinecrypt:
add target for inline block device encryption") was merged in v7.2.11hCVE-2026-1238909.8 CRÍ—
———VMware vCenter contains an authentication bypass vulnerability in the VMware Directory Service.
Affected versions: 9.1.x (fixed in 9.1.1.0200); 9.0.x (fixed in 9.0.2.0200); 8.0 (fixed in 8.0 U3m); 5.x (fixed in 5.2.5).
Telco Cloud Platform 3.0, 4.x, 5.0.x, 5.1.x, 5.2 and Telco Cloud Infrastructure 3.0 are also affected (see KB463116).9hCVE-2026-120753——
———In Eclipse Ditto versions 1.1.0 to 3.9.8, when pre-authentication is enabled, the gateway service accepts the pre-authenticated subject not only from the `x-ditto-pre-authenticated` HTTP header set by a trusted reverse proxy, but also from an undocumented `x-ditto-pre-authenticated` URL query parameter that a client can set. A reverse proxy that only overwrites the header therefore does not stop clients from supplying their own subject. With the default configuration of the Ditto Helm chart (`global.jwtOnly: false`, which implicitly enables pre-authentication), the bundled nginx skips HTTP Basic authentication for any request with an `Authorization: Bearer` header and forwards it without the pre-authentication header. An unauthenticated remote attacker can send an invalid Bearer token together with the query parameter to authenticate as any chosen policy subject. Pre-authentication succeeds before the JWT is validated, so the attacker can read and modify Things and Policies with that subject's permissions. As a mitigation, disable pre-authentication in the gateway (`ENABLE_PRE_AUTHENTICATION=false`) or, when using the Helm chart, configure `global.jwtOnly: true`.6hCVE-2026-115560——
———Session serializer mismatch can lead to remote code execution.
Session upload progress, when enabled, can store attacker-controlled data in a session key using the php_binary or php_serialize session serializer. If the same session is later read with the php serializer, because session.serialize_handler is changed at runtime or differs between applications sharing a session store, bytes inside the key can be passed to the unserializer. A remote attacker able to submit a multipart upload can inject objects, which may lead to code execution when the reading application contains a suitable gadget chain, or to session corruption or denial of service.
This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.4hCVE-2026-133163——
———MISP contains an authorization bypass affecting the event protection mechanism. In MISP, a protected event is designed to be modifiable only through the events/edit endpoint with a valid cryptographic signature. However, the protection check was enforced solely on that single route. All other write endpoints that operate on an event—attributes (add, edit, delete), objects (delete), events (populate, publish, unprotect, upload_sample, upload_analysis_file), tags (attach, detach), event reports (edit, delete), galaxy clusters (attach, detach), and cryptographic keys (add, delete)—lacked the equivalent check.
As a result, an authenticated user holding the sync permission (perm_sync) who is neither a site administrator nor an internal sync user (perm_sync_internal), and who belongs to the same organization as the event's creator (orgc_id), could modify, delete, or add data to a protected event without providing a valid signature. This included the ability to unprotect the event entirely, publish it to other instances, and add cryptographic signing keys that would subsequently permit signed edits, effectively nullifying the protection mechanism.
The vulnerability requires an authenticated sync user account within the event's creator organization. No user interaction or special network conditions are required; standard API calls to the affected endpoints are sufficient. The security impact is a loss of integrity over protected threat-intelligence events: an attacker can inject, alter, or remove attributes, objects, tags, reports, and galaxy cluster associations, and can remove the protection flag or add signing keys to enable persistent unauthorized modification.11hCVE-2026-1331154.3 MED—
———Redmine 6.1.0 before 6.1.6 and 7.0.0 before 7.0.3 contains an incorrect authorization vulnerability that lets OAuth clients exceed token scope during project creation. A client with only project-creation scope can set is_public, enabled_module_names and inherit_members, making projects public and granting parent-project members subproject access.9hCVE-2026-99557——
———In the Linux kernel, the following vulnerability has been resolved:
ceph: fail readdir when the MDS reply carries no dirfrag
A ceph mount oopses in ceph_readdir() when the MDS answers a READDIR
request with a reply whose extra blob is empty. parse_reply_info()
skips reply blobs whose length is zero, so parse_reply_info_readdir()
never runs, r_reply_info.dir_dir stays NULL, and the reply still
parses as successful. ceph_mdsc_do_request() returns 0 and
ceph_readdir() then reads rinfo->dir_dir->frag with no NULL check:
/* extra */
ceph_decode_32_safe(&p, end, len, bad);
if (len > 0) {
...
err = parse_reply_info_extra(&p, p + len, req, features, s);
...
}
The oops on v7.3.0-rc4-00537-ga3ff15db6820, one getdents64(2) on the
mount root after an ms_mode=legacy mount, trimmed:
BUG: KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI
CPU: 1 UID: 0 PID: 266 Comm: ls Tainted: G N 7.3.0-rc4-00537-ga3ff15db6820 #1 PREEMPT(lazy)
RIP: 0010:ceph_readdir+0xbff/0x3ea0
Call Trace:
<TASK>
? __pfx_ceph_readdir+0x10/0x10
wrap_directory_iterator+0xa2/0xe0
iterate_dir+0x1da/0x5d0
__x64_sys_getdents64+0x13b/0x2a0
do_syscall_64+0xdd/0x4a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
The unconditional frag read came in with 81c6aea5275ea ("ceph: handle
frag mismatch between readdir request and reply"), so the bug is old.
Treat a reply with no dirfrag as a protocol violation: warn once,
drop the request and return -EIO, the same way ceph_readdir() already
handles the two malformed-reply cases later in the function.
Tested on v7.3.0-rc4-00537-ga3ff15db6820 (KASAN). Unpatched, the
getdents64(2) above takes the machine down (oops=panic) on the first
READDIR reply. With the patch it warns once and getdents64(2)
returns -EIO, no oops, no hang. A conformant reply for an empty
directory — dirfrag present, zero entries, FRAG_END|FRAG_COMPLETE —
still lists "." and ".." and returns EOF on both kernels, so normal
readdir behavior is unchanged. The oops is still present in
v7.3-rc5 (72d3fcf802c45).11hCVE-2026-99556——
———In the Linux kernel, the following vulnerability has been resolved:
ksmbd: serialize directory emptiness checks with readdir
SMB2 QUERY_DIRECTORY holds fp->readdir_lock while it calls iterate_dir()
on fp->filp. An SMB2 SET_INFO request with FILE_DISPOSITION_INFORMATION
can resolve the same FileId and call ksmbd_vfs_empty_dir() on the same
filp without that lock.
iterate_dir()'s inode read lock permits concurrent readers and does not
serialize per-file iterator state. ext4 stores its dx readdir cursor and
fname RB tree in file->private_data. Concurrent reset or refill can
therefore free a fname node while the other worker still traverses it or
retains its RB-tree link, resulting in use-after-free accesses.
An authenticated SMB client with list and delete rights on a directory in
a writable KSMBD share backed by ext4 can trigger this when the directory
takes the dx readdir path. The client overlaps an SMB2 QUERY_DIRECTORY
request with an SMB2 SET_INFO request carrying FILE_DISPOSITION_INFORMATION
on one live FileId.
In one x86_64 SMP KASAN multi-shot guest using ksmbd-for-next at
171df27077fb, the unmodified kernel reported a cross-worker use-after-free
before a panic. The first report's access and free stacks show the two
request paths directly (trimmed):
BUG: KASAN: slab-use-after-free in ext4_htree_store_dirent+0x488/0x550
Read of size 8 by task kworker/2:0/29
Workqueue: ksmbd-io handle_ksmbd_work
Call Trace:
ext4_htree_store_dirent+0x488/0x550
htree_dirblock_to_tree+0x535/0x990
ext4_htree_fill_tree+0x319/0xba0
ext4_readdir+0x175a/0x2f40
iterate_dir+0x1b6/0x630
smb2_query_dir+0x1003/0x1cc0
Freed by task 279:
free_rb_tree_fname+0x67/0xc0
ext4_readdir+0x13a9/0x2f40
iterate_dir+0x1b6/0x630
ksmbd_vfs_empty_dir+0xa2/0x100
smb2_set_info+0x2ffa/0x45d0
Take fp->readdir_lock across the entire emptiness check. This places both
iterators over that handle's filp in the same lock domain while
preserving the disposition status handling. The exact code change
completed a warning-free x86_64 KASAN bzImage build. Tracing three request
pairs showed that the two iterate_dir() calls no longer overlapped and the
expected statuses were preserved. A further 1,600 reproducer iterations
completed with expected statuses and no KASAN report, Oops, or panic.
The reproducer and complete guest configuration are available privately
to maintainers on request.11hCVE-2026-99555——
———In the Linux kernel, the following vulnerability has been resolved:
media: usbtv: fix null-pointer dereference on disconnect
A null-pointer dereference can occur in usb_make_path() when called from
usbtv_querycap() (and other ioctl handlers) during device disconnection.
Oops: general protection fault, probably for non-canonical address
0xdffffc000000000a: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000050-0x0000000000000057]
RIP: 0010:usb_make_path include/linux/usb.h:985 [inline]
RIP: 0010:usbtv_querycap+0x9c/0x100
drivers/media/usb/usbtv/usbtv-video.c:612
...
Call Trace:
<TASK>
v4l_querycap+0x236/0x470 drivers/media/v4l2-core/v4l2-ioctl.c:1106
__video_do_ioctl+0x8af/0xc70 drivers/media/v4l2-core/v4l2-ioctl.c:3133
video_usercopy+0x860/0x1430 drivers/media/v4l2-core/v4l2-ioctl.c:3475
v4l2_ioctl+0x18d/0x1e0 drivers/media/v4l2-core/v4l2-dev.c:366
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x174/0x580 arch/x86/entry/syscall_64.c:94
This happens due to a race condition between the USB device disconnect
routine (usbtv_disconnect()) and V4L2 ioctls. When the device is
disconnected, usbtv_disconnect() sets usbtv->udev = NULL without holding
the usbtv->v4l2_lock mutex. Concurrently, an ioctl handler like
usbtv_querycap() can be executing under the v4l2_lock and attempt to use
usbtv->udev, leading to a crash.
To fix this, move the usbtv->udev = NULL assignment into usbtv_video_free()
and protect it with mutex_lock(&usbtv->v4l2_lock). This ensures that no
non-queue ioctl handler can run concurrently with the pointer being
nullified. If an ioctl is already running, the mutex will block the
disconnect path until the ioctl finishes. If an ioctl is blocked waiting
for the lock, it will acquire it after the disconnect routine releases it,
but will then check video_is_registered() (which was cleared by
vb2_video_unregister_device()) and safely return -ENODEV.
Acquiring v4l2_lock after vb2_video_unregister_device() avoids
reintroducing a historical deadlock issue, and usbtv_audio_free() remains
safe as it is called before usbtv_video_free().11hCVE-2026-99554——
———In the Linux kernel, the following vulnerability has been resolved:
net: usb: pegasus: do not advance rx_skb->data on dropped frames
For the 0x8513 chip, read_bulk_callback() skips the 2-byte receive
header by advancing pegasus->rx_skb->data in place. This is done before
the pkt_len > PEGASUS_MTU check, and when that check drops the frame
the good path resubmits the same skb with the advanced rx_skb->data as
the transfer buffer, still PEGASUS_MTU bytes long.
Every frame with an oversized length field therefore moves the receive
buffer two more bytes towards the end of the skb data area. A device
that keeps sending such frames makes the host controller write received
data over skb_shared_info and past the end of the allocation, and the
corrupted skb_shared_info is used when the skb is eventually freed.
With an emulated device sending frames filled with 0x5a on a KASAN
kernel:
BUG: KASAN: slab-out-of-bounds in dummy_timer+0xade/0x3f00 [dummy_hcd]
Write of size 1536 at addr ffff888105821202 by task swapper/1/0
...
Oops: general protection fault, probably for non-canonical address 0xeb4b474b4b4b4b4c: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: maybe wild-memory-access in range [0x5a5a5a5a5a5a5a60-0x5a5a5a5a5a5a5a67]
RIP: 0010:skb_release_data+0x36f/0x800
Only skip the header with skb_reserve() once the frame is going to be
passed up, so the receive buffer always starts at the beginning of the
skb data area. Unlike the old pointer adjustment, skb_reserve() also
moves skb->tail, so the two header bytes now count against the buffer
size: lower the length limit for the 0x8513 accordingly, otherwise a
pkt_len of PEGASUS_MTU - 1 or PEGASUS_MTU would trip skb_over_panic().
Found by code review with LLM assistance and reproduced with an
emulated USB device (raw-gadget + dummy_hcd).11hCVE-2026-1215846.5 MED—
———Mattermost versions 11.7.x <= 11.7.11, 11.10.x <= 11.10.2, 11.11.x <= 11.11.1 fail to bound the number of records a single GraphQL request may hydrate which allows an authenticated user to exhaust server memory and cause a denial of service via a small query that repeats the runs field under many aliases. Mattermost Advisory ID: MMSA-2026-007679hCVE-2026-99552——
———In the Linux kernel, the following vulnerability has been resolved:
ocfs2/dlm: drain join handlers before releasing module text
The code for a registered DLM handler must remain resident until its
last invocation finishes. dlm_unregister_net_handlers() only removes
dlm_join_handlers from the o2net registry. o2net_handler_get() takes a
kref on the wrapper, but that reference does not pin ocfs2_dlm text.
o2net_process_message() calls nh_func after dropping o2net_handler_lock.
With CONFIG_OCFS2_FS_O2CB=m, ocfs2_dlm can be loaded independently of
ocfs2_stack_o2cb while nodemanager continues handling messages from a
configured, heartbeating peer. If no dependent module or module reference
prevents normal unload, the following ordering is possible:
Receive worker Module unload
-------------- -------------
o2net_handler_get()
take wrapper kref
drop handler lock
<preempted>
dlm_exit()
unregister handlers
release DLM module text
call saved nh_func
in released module text
Use o2net_unregister_and_flush_handler_list() in the shared DLM
unregister helper. It first prevents new lookups, then waits for the
ordered o2net workqueue to drain, including a concurrent destruction of
that queue. The acquired invocation therefore finishes before dlm_exit()
returns and the loader releases the callback code. The same helper
covers partial registration and dlm_init() error unwind before module
memory is released.
Skip the drain when the private join-handler list is empty. Early
dlm_init() failures can reach this helper before any handler has been
published. Partial-registration failure also reaches it a second time
after the first call has already unregistered and drained the list.
Neither case needs to take o2net_wq_mutex or drain unrelated work.
The list is changed only by serialized module init/exit paths; a
nonempty list still uses the full unregister-and-flush helper.
Oops report as below:
Oops: int3: 0000 [#1] SMP KASAN NOPTI
CPU: 2 UID: 0 PID: 54 Comm: kworker/u16:3 Not tainted 7.3.0-rc4-next-20260921-pmb-ocfs2-functional-v1+ #1 PREEMPT(lazy)
Hardware identification omitted.
Workqueue: o2net o2net_rx_until_empty [ocfs2_nodemanager]
RIP: 0010:0xffffffffc0423871
[Instruction byte dump omitted.]
Register dump omitted.
Call Trace:
<TASK>
? o2net_rx_until_empty+0x19b1/0x3300 [ocfs2_nodemanager]
? __pfx_o2net_rx_until_empty+0x10/0x10 [ocfs2_nodemanager]
? lock_acquire+0x190/0x300
? process_one_work+0x935/0x1b40
? process_one_work+0x834/0x1b40
? srso_alias_return_thunk+0x5/0xfbef5
? lock_release+0xc8/0x290
? srso_alias_return_thunk+0x5/0xfbef5
? process_one_work+0x9a8/0x1b40
? __pfx_process_one_work+0x10/0x10
? lock_acquire+0x190/0x300
? lock_is_held_type+0x8f/0x100
? srso_alias_return_thunk+0x5/0xfbef5
? worker_thread+0x65c/0xe40
? srso_alias_return_thunk+0x5/0xfbef5
? __kthread_parkme+0x177/0x220
? srso_alias_return_thunk+0x5/0xfbef5
? __pfx_worker_thread+0x10/0x10
? kthread+0x351/0x460
? srso_alias_return_thunk+0x5/0xfbef5
? __pfx_kthread+0x10/0x10
? ret_from_fork+0x659/0x940
? __pfx_ret_from_fork+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? __switch_to+0x74f/0xf70
? __pfx_kthread+0x10/0x10
? ret_from_fork_asm+0x1a/0x30
</TASK>
Modules linked in: ocfs2_nodemanager [last unloaded: ocfs2_dlm]
---[ end trace 0000000000000000 ]---11hCVE-2026-99551——
———In the Linux kernel, the following vulnerability has been resolved:
ocfs2: drain quorum work before removing the cluster
The configured cluster must remain available until an in-flight quorum
decision has finished using its fencing method. o2quo_make_decision()
drops qs_lock before calling o2quo_fence_self(), which marks heartbeat
regions for unclean stop and then reads
o2nm_single_cluster->cl_fence_method. Cluster removal clears the
singleton without waiting for this independent system-workqueue item.
When a failed-quorum decision overlaps removal of the heartbeat regions,
nodes and cluster through configfs, the worker can be preempted after
marking the regions and resume after the singleton has been cleared:
Quorum worker Configfs removal
select fence; drop qs_lock
o2hb_stop_all_regions()
remove regions; join heartbeat threads
remove nodes; stop o2net
clear singleton; release cluster
read cl_fence_method
The resumed read dereferences NULL instead of applying the configured
fencing method. The heartbeat thread's dependency protects the local
node only until the thread exits, and draining o2net does not wait for
qs_work.
Add o2quo_flush_work() to drain pending or running quorum decisions
before clearing the singleton in o2nm_cluster_group_drop_item(). By
this point the heartbeat regions and nodes have been removed, so their
work publishers are stopped. The worker can finish while the cluster
and its configured fencing method remain available. It does not acquire
the configfs mutex held by the removal path.
Keep o2quo_exit() as the counterpart of o2quo_init() for module teardown
and initialization failure, and have it call the same drain helper.
Cluster removal uses only the explicitly named drain operation.
KASAN report as below:
Oops: general protection fault, probably for non-canonical address 0xdffffc000000011b: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x00000000000008d8-0x00000000000008df]
CPU: 0 UID: 0 PID: 72 Comm: kworker/0:2 Not tainted 7.3.0-rc4-next-20260921-pmb-ocfs2-functional-v1+ #1 PREEMPT(lazy)
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: events o2quo_make_decision
RIP: 0010:o2quo_fence_self+0x65/0x200
Register dump omitted.
Call Trace:
<TASK>
o2quo_make_decision+0x345/0x3a0
? __pfx_o2quo_make_decision+0x10/0x10
? process_one_work+0x834/0x1b40
? srso_alias_return_thunk+0x5/0xfbef5
? lock_release+0xc8/0x290
? srso_alias_return_thunk+0x5/0xfbef5
process_one_work+0x9a8/0x1b40
? __pfx_process_one_work+0x10/0x10
? lock_acquire+0x190/0x300
? lock_is_held_type+0x8f/0x100
? srso_alias_return_thunk+0x5/0xfbef5
worker_thread+0x65c/0xe40
? srso_alias_return_thunk+0x5/0xfbef5
? __kthread_parkme+0x177/0x220
? srso_alias_return_thunk+0x5/0xfbef5
? __pfx_worker_thread+0x10/0x10
kthread+0x351/0x460
? srso_alias_return_thunk+0x5/0xfbef5
? __pfx_kthread+0x10/0x10
ret_from_fork+0x659/0x940
? __pfx_ret_from_fork+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? __switch_to+0x74f/0xf70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---11hCVE-2026-99550——
———In the Linux kernel, the following vulnerability has been resolved:
ocfs2: pin owning modules for open debugfs files
The OCFS2 debugfs file operation tables do not set owner. The
full debugfs proxy obtains real_fops with fops_get() at open and
keeps it until final release. Without an owner, this does not acquire
a reference to the module containing the table and its callbacks.
Removing the debugfs entries does not drain retained open files.
An open connected_nodes file can therefore outlive ocfs2_nodemanager
and make full_proxy_release() read real_fops->release from freed
module memory. Heming also reproduced the issue with fs_state and
asked for the other OCFS2 debugfs operation tables to be checked.
Set owner to THIS_MODULE in all eleven explicit debugfs operation
tables: five in ocfs2_nodemanager, four in ocfs2_dlm, and two in
ocfs2. The existing debugfs get/put pair then holds the appropriate
module until final release. Leave the open, read and release callbacks
unchanged. The blockcheck table already sets owner through
DEFINE_DEBUGFS_ATTRIBUTE(), so it needs no change.
The original controlled test used an unloadable OCFS2 module and
case-local probe filters without changing the candidate open, unload
or release logic. Closing a retained connected_nodes file after
normal unload produced:
BUG: unable to handle page fault for address: fffffbfff804cfef
Oops: Oops: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:full_proxy_release+0xbf/0x190
Call Trace:
<TASK>
__fput+0x39a/0xa60
fput_close_sync+0xff/0x200
__x64_sys_close+0x8c/0xf0
do_syscall_64+0x114/0x620
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Modules linked in: [last unloaded: ocfs2_nodemanager]11hCVE-2026-133165——
———MISP contains an authorization and scope flaw in the ObjectReference model's captureReference method. When a user saves an event (via REST API, sync, or feeds), any object reference included in the payload is looked up by its UUID across the entire MISP instance rather than being scoped to the event being saved. An authenticated user with permission to add or edit events can therefore include the UUID of an object reference belonging to a different event—including events in other organizations that the user cannot view—and cause the system to overwrite that foreign reference's relationship_type, comment, deleted flag, and timestamp with attacker-supplied values. The affected reference is neither deleted nor recreated in the attacker's event; its fields are silently rewritten in place. This constitutes a cross-tenant integrity violation: data integrity of object references in events the attacker has no read or write access to is compromised. The vulnerability is reachable through any event save path (REST add/edit, inter-instance sync, feed ingestion) and requires only a valid authenticated session with event modification privileges and knowledge or discovery of a target reference UUID.11hCVE-2026-133157——
———flowintel contains a CSV injection vulnerability in its audit log CSV export functionality. Attacker-influenced text recorded in audit logs could be interpreted as spreadsheet formulas when an administrator opened the exported CSV file in a spreadsheet application.
The vulnerable behavior allowed an attacker who could influence audit log content (for example by generating network traffic that is captured and logged) to embed formula-like strings (such as =CMD() or =HYPERLINK()) into audit entries. When the resulting CSV export was opened in a spreadsheet application, these strings could be executed as formulas, potentially leading to data exfiltration, data manipulation, or execution of further malicious actions within the spreadsheet context.
Preconditions:
- An attacker must be able to influence content that is recorded in flowintel audit logs.
- An administrator or user must export the audit logs to CSV and open the file in a spreadsheet application that interprets formulas.
Security impact:
- Potential information disclosure from the spreadsheet or linked resources.
- Potential integrity impact on data within the spreadsheet application.
- No direct compromise of the flowintel application itself.
Affected version: <4.1.011hCVE-2026-99549——
———In the Linux kernel, the following vulnerability has been resolved:
smb: client: do not pass a NULL buf to is_oplock_break()
receive_encrypted_read() sets *num_mids = 1 and never writes the
caller's bufs[]. Offload returns -1 with *num_mids = 0, so the
demultiplex thread skips the frame. The inline decrypt path
returns 0 even when smb2_find_mid() fails.
cifs_demultiplex_thread() then treats mids[i] == NULL as an
oplock break and calls is_oplock_break(bufs[i], server) with
bufs[i] still NULL. smb2_is_valid_oplock_break() reads
hdr.Command at offset 12 and oopses.
A large encrypted READ whose MessageId does not match is enough
to panic cifsd.
Oops: general protection fault, probably for non-canonical address
0xdffffc0000000001: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range
[0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 100 Comm: cifsd
RIP: smb2_is_valid_oplock_break+0xc8/0x2270 [cifs]
cifs_demultiplex_thread
Kernel panic - not syncing: Fatal exception
Return -1 when inline decrypt finds no mid, and skip
is_oplock_break() plus the unknown-frame dump when bufs[i]
is NULL. receive_encrypted_standard() already assigns
bufs[*num_mids].11hCVE-2026-99547——
———In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Do not RPM complete unrelated subtrees on unplug
When a Thunderbolt device is unplugged, that switch and every switch
subsequent to it on the bus device list is `complete()`d, not just its
child devices. In the case of multiple domains, it may cause, eg, an
attempt to `complete()` the uninitialized domain 1 root switch RPM
completion on unplug of a switch from domain 0 (though ordering is not
guaranteed numerically sorted).
I initially noticed this issue on a Dell XPS9720 when the system would
seem to sporadically not wake after unplugging a Thunderbolt dock. I
tried multiple kernel versions including v7.2.7 and v7.3-rc4 to see if
that resolved the issue, but the issue persisted. Eventually I found
that I could consistently generate a kernel Oops reporting a page fault
at 0xffff_ffff_ffff_fff8 on unplug from one side of the laptop and went
bug hunting. I became suspicious of the `bus_for_each_dev()` walk that I
ultimately ended up changing. To confirm this issue, I did an eBPF trace
of `bus_for_each_dev()`, `complete_rpm()`, and `complete()` while
unplugging in a variety of situations and found that an unplug from
domain 0 tries to `complete_rpm()` domain 1's switch, whose RPM
completion is not initialized and thus is holding a null wait-list
pointer, triggering the page fault.
Here are the key sections of that eBPF trace. Note that HEAD denotes the
completion's own wait-list HEAD:
```
RESCAN_ENTER domain=0
COMPLETE rescan_domain=0 target=0-1 target_domain=0
route=0x1 parent=0-0 unplugged=1
COMPLETION done=0 head=HEAD next=HEAD prev=HEAD
BUS_WALK domain=0 start=0-1 callback=complete_rpm
CALLBACK_ENTER rescan_domain=0 dev=1-0 parent=domain1 is_switch=1
COMPLETE rescan_domain=0 target=1-0 target_domain=1
route=0x0 parent=domain1 unplugged=0
COMPLETION done=0 head=HEAD next=0 prev=0
complete+5
complete_rpm+43
bus_for_each_dev+133
icm_free_unplugged_children+250
icm_rescan_work+42
```
This patch gates the `complete()` on an additional condition - that the
Thunderbolt domain matches the domain of the device that was unplugged.
I only have a single system with multiple Thunderbolt domains - the Dell
XPS9720. I am consistently able to reproduce the Oops on that system.
Since running with this patch, I have not seen the Oops reoccur. I have
also tested it on a Thinkpad X1-Gen12, and that system boots and runs
well with it, but it only has a single Thunderbolt domain, so it does
not exercise the multi-domain failure case.11hCVE-2026-1331165.4 MED—
———Termix 1.7.0 before 26.11.2 contains a path traversal vulnerability that allows authenticated users to write files outside the export directory via crafted usernames. Attackers can self-register with a username containing ../ segments and request POST /database/export to plant attacker-controlled SQLite files in writable directories, enabling disk exhaustion.10hCVE-2026-99545——
———In the Linux kernel, the following vulnerability has been resolved:
driver core: take parent lock on deferred probe
USB interfaces should be probed with the parent USB device lock held,
but this is not honoured when probe is deferred.
Add a new bus_probe_device_deferred() helper to handle deferred probe
where the parent device lock is not held.11hCVE-2026-99543——
———In the Linux kernel, the following vulnerability has been resolved:
backlight: qcom-wled: Fix NULL pointer dereference in wled_remove()
wled_probe() doesn't set the driver data for the platform device.
As a result, platform_get_drvdata() in wled_remove() will return NULL,
and the first dereference of it crashes on unbind.
Set the platform device driver data in wled_probe().11hCVE-2026-99542——
———In the Linux kernel, the following vulnerability has been resolved:
ksmbd: deny access for an empty DACL instead of granting the request
smb_check_perm_dacl() returns the access mask it computes to the SMB2
CREATE handler, which uses it as the granted access for the open. For a
security descriptor whose DACL is present but contains no ACEs, the
function is supposed to deny access: an empty (non-NULL) DACL grants no
access to anyone except the object owner's implicit READ_CONTROL and
WRITE_DAC (MS-DTYP 2.4.5).
The empty-DACL branch only denies when both
- the DACL has no trailing bytes (pdacl_size == sizeof(struct smb_acl)),
and
- the request contains bits beyond READ_CONTROL / WRITE_DAC.
In every other case it takes the shared "goto err_out" with rc still 0,
which returns success without modifying *pdaccess, so the caller grants
the full requested access. Three problems follow:
- The READ_CONTROL / WRITE_DAC carve-out models the owner's implicit
rights, but the check runs before is_owner is computed, so those
rights are handed to *every* caller, not just the owner. For
READ_CONTROL the SMB2 CREATE path does not fall back to
inode_permission(), so any user can read the security descriptor of
an object whose empty DACL is meant to deny them.
- A request of exactly READ_CONTROL and/or WRITE_DAC is granted to any
caller. WRITE_DAC lets the handle rewrite the DACL.
- A DACL that declares zero ACEs but carries trailing bytes
(pdacl_size > sizeof(struct smb_acl)) skips the deny entirely and is
granted whatever was requested.
On shares where the NT ACL is the authoritative access control -- e.g.
"force user" shares, where every client maps to one POSIX identity so
POSIX cannot distinguish users -- this is an access-control bypass.
Compute is_owner before the empty-DACL branch and deny access from an
empty DACL unless the caller is the owner requesting no more than
READ_CONTROL / WRITE_DAC.11hCVE-2026-99540——
———In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix parent dentry lifetime in directory enumeration
ksmbd_populate_dot_dotdot_entries() builds the ".." entry from
the open directory's d_parent and passes that pointer to
ksmbd_vfs_fill_dentry_attrs() without taking a reference. That pointer
is only valid while the directory stays under this parent. If a
concurrent rename moves the directory elsewhere, the old parent loses
its last reference; a following rmdir then turns it into a negative
dentry with d_inode cleared, and after the RCU grace period the dentry
itself is freed. The worker still holds the raw pointer and
dereferences d_inode through vfs_getattr() and vfs_getxattr().
A remote SMB client, authenticated or guest, triggers this by listing
a directory while that directory is moved under a new parent and the
old parent is deleted. It can be done by the client itself with write
access or by other concurrent writers, triggering null-ptr-deref and
slab-use-after-free on a KASAN build.
KASAN: null-ptr-deref in range
[0x0000000000000000-0x0000000000000007]
Workqueue: ksmbd-io handle_ksmbd_work
RIP: 0010:xattr_permission+0x9d/0x160
Call Trace:
vfs_getxattr+0x9c/0x1b0
ksmbd_vfs_getxattr+0x82/0x100
ksmbd_vfs_get_dos_attrib_xattr+0x7f/0x130
ksmbd_vfs_fill_dentry_attrs+0x435/0x650
ksmbd_populate_dot_dotdot_entries+0x25e/0x630
smb2_query_dir+0xcf9/0x1a20
handle_ksmbd_work+0x5f1/0x1c80
process_one_work+0x90b/0x19d0
Fix by using the dentry reference counting APIs: take the parent with
dget_parent(), take a matching dget() on ".", and dput() the dentry
once ksmbd_vfs_fill_dentry_attrs() has returned or the pattern does
not match.11hCVE-2026-99539——
———In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix session reference leak on compounded SESSION_SETUP
A compound request can place SESSION_SETUP after another command. That
earlier command leaves a reference to its session in work->sess.
smb2_sess_setup() then overwrites work->sess with the session it looks up
or creates, and the dispatcher later puts work->sess only once. The
inherited reference is never dropped. That leaks the session, together
with its setup connection and socket, and every repeat of the compound
leaks another.
unreferenced object (size 512):
__kmalloc_cache_noprof+0x32c/0x3a0
ksmbd_smb2_session_create+0xf6/0x9c0 [ksmbd]
smb2_sess_setup+0xda4/0x6280 [ksmbd]
handle_ksmbd_work+0x88c/0x1cb0 [ksmbd]
Save the inherited session on entry. After the request has been
processed, release it once, but only when smb2_sess_setup() has replaced
work->sess with its own session or cleared it. Do this after
ksmbd_conn_unlock() so the put does not run under srv_mutex. An error path
may instead leave the inherited session in work->sess. Keep it there, so
the dispatcher still puts it and the error response is still signed or
encrypted with it as before.11hCVE-2026-99538——
———In the Linux kernel, the following vulnerability has been resolved:
ksmbd: ignore network devices of other namespaces
With no interface list configured, ksmbd binds every interface that
comes up. ksmbd_netdev_event() does not look at the device's namespace,
and create_socket() opens the listener in the namespace of the task
raising NETDEV_UP. A container with its own address on a bridge brings
up its interface and finds port 445 in its namespace already taken by
ksmbd, so an SMB server running inside the container fails with
"Address already in use".
Interfaces are also matched by name only, so a container's eth0 going
down would stop the listener on the host's eth0.
Only handle netdev events for devices in init_net.11hCVE-2026-99534——
———In the Linux kernel, the following vulnerability has been resolved:
ksmbd: prevent stale data from being written by SMB2 WRITE requests
Initialize the compatibility byte in request buffers without zeroing
the entire allocation. Keep the one-byte compatibility exception for
SMB2 messages so valid zero-length WRITE requests remain compatible,
and validate the data range in the WRITE handlers against the current
compound request before accessing it.
This prevents stale request-buffer data from being written to files or
sent to IPC pipes.11hCVE-2026-99533——
———In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate AppInstanceId takeover target
AppInstanceId lookup currently selects the first open with the matching
identifier. CREATE for an unrelated share or path can therefore
force-close another session's open before authorization of the new
target. Matching only the base path also conflates alternate data streams
with the unnamed stream.
MS-SMB2 requires the old open to match the share and path, belong to a
different ClientGuid, and be closed only when the requester has
GENERIC_READ access. Search all opens with the ID and match share,
resolved path, stream, and the current connection's client GUID. Retain a
share configuration reference in ksmbd_file and reuse its name instead of
allocating a name for every open. This keeps matching safe during tree
connection teardown and preserves name-based matching across configuration
updates.
Refresh the share reference on durable reconnect and restore the old
reference if reopening fails. Serialize connection and share comparisons
with durable disconnect/reconnect, and recheck the target before closing
it. Keep the original ClientGuid for durable replay and lease checks.
Check AppInstanceVersion before querying access, even when GENERIC_READ
is absent, and before disconnected delete-on-close cleanup. Rejected
CREATE must leave other durable opens untouched. Calculate maximal access
on the matched open's referenced path so a rename cannot substitute another
file's authorization. Require read access with the effective VFS
credentials as well as the NT DACL before takeover. Access denial only
skips takeover and leaves CREATE to its normal access checks. Restore
filesystem credentials before returning a takeover error.
Handle takeover before checking FILE_CREATE collisions, and re-resolve
the path after closing the old open. This lets delete-on-close remove the
old file before a new one is created. Include SYNCHRONIZE in the baseline
maximal-access mask so read-only files report GENERIC_READ correctly.11h