Vulnerabilidades exploráveis hoje
418,896na visualização atual
Score único que combina CVSS, presença no KEV e EPSS. Cada CVE com sua própria ficha — timeline da publicação até a exploração ativa.
No catálogo KEV1,786
Novos KEV · 24H0
Exploit Today ≥ 701,715
Distribuição · última janela
- Crítica4,730
- Alta18,254
- Média18,062
- Baixa1,977
Filtros
Janela
Severidade
Filtros
CVECVSSEPSSKEVRExploitTítuloMod.
CVE-2026-99640——
——0In the Linux kernel, the following vulnerability has been resolved:
ovl: do not let chattr change the casefold flag
chattr +F or -F on an overlay directory can make the directory, or the
whole mount, unusable. Lookups of the directory, and lookups in it, then
fail. From code inspection, the caller only needs to own the directory.
The upper filesystem must support casefolding: ext4 or f2fs with the
casefold feature, or tmpfs with the casefold option.
chattr +F and -F set and clear FS_CASEFOLD_FL, the casefold flag of a
directory. The flag enables casefolding (case-insensitive name lookup)
for the directory. All directories of an overlay must match the casefold
state that was recorded at mount time, and ovl_lookup_single() enforces
this:
- A lookup in a directory that does not match fails with -ESTALE.
- A lookup of the directory itself fails with -EREMOTE.
ovl_fileattr_set() copies the directory up, which creates it in the
upper layer if it only existed in a lower layer. It then passes
FS_CASEFOLD_FL on to the upper filesystem. The upper filesystem accepts
the change if the upper directory is empty, regardless of what the
merged directory contains. The merged directory is the one that the user
sees, with the names from the upper and the lower directories.
After the change the upper directory no longer matches the mount. If the
directory is the root of the overlay, the whole mount is affected.
The flag can also change without chattr +F or -F. chattr reads all flags
of a directory, changes one and writes all of them back. For a directory
that only exists in a lower layer, overlayfs reads the flags from the
lower filesystem. xfs with the ascii-ci feature reports FS_CASEFOLD_FL
on every inode, but never sets S_CASEFOLD, the inode flag that overlayfs
compares with the mount. So its directories count as not casefolded.
With a lower layer on such an xfs and an upper layer on ext4 with the
casefold feature, chattr +A on a lower-only directory therefore sets
FS_CASEFOLD_FL on the new, empty upper directory.
Reproduced as root on tmpfs and on ext4 with chattr +F or -F on an
overlay directory whose upper directory was empty. Afterwards lookups
below it failed with ESTALE, and lookups of the directory itself failed
with EREMOTE. The chattr +A case was seen once, on a kernel with an
earlier form of this patch that still passed the caller's flag on:
lookups of the directory failed with EREMOTE.
Fix this by returning -EOPNOTSUPP if FS_IOC_SETFLAGS, the only call that
can change the flag, asks for a casefold flag on a directory that does
not agree with the casefold state of the mount. This also refuses the
chattr +A case above.
[amir: check the flag against the casefold state of the mount instead of
reading back the flags]14hCVE-2026-99642——
——0In the Linux kernel, the following vulnerability has been resolved:
mm/gup: check folio->mapping under folio lock in memfd_pin_folios()
memfd_pin_folios() pins folios from the page cache without taking the
folio lock. khugepaged or MADV_COLLAPSE can therefore replace a folio
after checking its refcount while memfd_pin_folios() still pins the old
folio. The caller then receives a folio which is no longer part of the
memfd.
For udmabuf and iommufd, this can cause data corruption: DMA accesses
the detached folio rather than the live memfd contents. DMA reads can
return stale data, while DMA writes update the detached copy and are
lost from the live memfd. The detached folio remains pinned, so these
accesses do not constitute a use-after-free or target another
application's memory. For memfd live update, the stale contents can
reappear in the memfd after handover.
Lock the folio and recheck folio->mapping before pinning it, like other
page cache users do. If the folio was removed, retry the folio lookup
from the index that was removed.14hCVE-2026-99643——
——0In the Linux kernel, the following vulnerability has been resolved:
khugepaged: fix readahead lock inversion in collapse_file()
collapse_file() can call page_cache_sync_readahead() while still holding
source folios locked. If truncate holds mapping->invalidate_lock
exclusively and waits for one of those folios, readahead waits for
invalidate_lock and neither side can make progress.
We need to release those folio locks before starting readahead. On a page
cache miss, roll back first, populate the collapse range, and retry once.
Doing readahead after rollback avoids an extra pass when all folios are
already present. If another miss occurs on retry, give up rather than keep
retrying while truncate or reclaim removes folios.
Keep page_cache_sync_readahead() and wait for read I/O with
filemap_lock_folio(), releasing each folio before moving to the next. The
existing uptodate check during collapse still handles read errors.
Shmem uses shmem_get_folio() for swapin and fallocated folios without
taking mapping->invalidate_lock, so it is unaffected.14hCVE-2026-99648——
——0In the Linux kernel, the following vulnerability has been resolved:
mm/vma: call ->may_split() before a partial merge
A driver can use the ->may_split() hook to forbid a VMA boundary at
certain addresses.
A device-dax device is a character device that gives raw access to a
range of memory through mmap(). device-dax refuses any address that is not
a multiple of the device's alignment through vm_ops->may_split.
vma_merge_existing_range() can move boundaries, but does not call
vm_ops->may_split.
If a range at the edge of a VMA gets the attributes of the adjacent VMA,
the function moves only that range over to the neighbour: one VMA shrinks
and the other grows. This is a partial merge, and vma_modify() tries it
before any split.
Take a device-dax VMA that lies next to another VMA of the same file.
The user calls mprotect() on the one page of the first VMA that touches
the second VMA, and asks for the protection that the second VMA already
has. The result is a partial merge. It puts the boundary inside a 1 GiB
mapping, which is a single leaf entry at the PUD level.
As part of the merge, the kernel looks for a huge PMD to split at the
new boundary. That code does not expect a PUD leaf:
vma_merge_existing_range()
commit_merge()
vma_adjust_trans_huge()
split_huge_pmd_address()
mm_find_pmd()
treats the PUD leaf as a pointer to a PMD table,
so the "table" is the device memory that the leaf maps
__split_huge_pmd()
reads a PMD that the user wrote to the device memory
folio_put() on the folio that this PMD names
Bad. While the code must at some point be taught to split PUD entries as
well, the issue here is that we move VMA boundaries such that they are
incompatible with the driver.
Fix this by calling ->may_split() on the address that a partial merge
would move the boundary to, and by abandoning the merge if the driver
refuses. vma_modify() then tries the split, which fails with -EINVAL.
Factor out existing split handling into check_split() and reuse it.
Fix generated by an LLM and sent by Chris Mason in private.
[ david: improve description; cleanup the code ]14hCVE-2026-99649——
——0In the Linux kernel, the following vulnerability has been resolved:
mm/ksm: check large swap-cache folios before mapping them
KSM folios are always small, but their shared swap slots can be read
back as part of a large folio in the swap cache. ksm_might_need_to_copy()
skips large folios, so another process can map a page with an incompatible
anon_vma or page index. Reverse mapping then cannot find the new
mapping, preventing migration or reclaim.
Apply the same compatibility checks to large folios as to small ones.
Pass the page corresponding to the swap entry and copy only that page
when necessary. In do_swap_page()'s copy path, decrement only that slot's
swap count, because the source swap-cache folio can now be large.
Fix generated by an LLM and sent by Chris Mason in private.14hCVE-2026-1330147.2 ALT—
——0In JetBrains TeamCity before 2026.2.1, 2026.1.5 remote code execution was possible via public reflection in the Kotlin DSL sandbox15hCVE-2026-132129——
——0Passing a different column type while using deprecated range predicates, allow OOB read of any memory address. Users should update to 1.17.2 or 1.18.22hCVE-2026-99651——
——0In the Linux kernel, the following vulnerability has been resolved:
mm/ksm: reset the unstable trees of all nodes
Each full scan resets ksm_nr_node_ids unstable tree roots. Enabling
merge_across_nodes resets this count to 1, even if per-node roots were
previously allocated.
So when toggling "merge_across_nodes" 0 -> 1 -> 0, a scan that starts
while the setting is 1 and continues after switching back to 0 can
encounter stale unstable tree roots, resulting in UAF.
Only root is allowed to change "merge_across_nodes", and the documented
sequence is: "merge_across_nodes setting can be changed only when there
are no ksm shared pages in the system: set run 2 to unmerge pages first,
then to 1 after changing merge_across_nodes, to remerge according to the
new setting."
Let's fix it by tracking in ksm_nr_node_ids the actual number of
allocated tree roots.
remove_all_stable_nodes() and ksm_check_stable_tree() will now scan
more tree roots (skipping the empty ones), which is harmless.14hCVE-2026-99652——
——0In the Linux kernel, the following vulnerability has been resolved:
mm: fix deadlock of mremap() against UFFDIO_MOVE
With per-VMA locks, UFFDIO_MOVE can run concurrently with mremap()
on different VMAs in the same mm. Those VMAs can share page tables, so
both operations can acquire the same pair of page-table locks.
UFFDIO_MOVE orders the locks by address, while mremap() takes the source
lock first. These conflicting orders can deadlock; mremap() holding
mmap_lock for writing no longer helps.
Move double_pt_lock() and double_pt_unlock() to mm/internal.h and use
them for all page-table moves in mremap(). Preserve the source entry
checks after acquiring both locks. Remove the comments claiming that
exclusive mmap_lock makes lock ordering irrelevant.
In move_ptes(), make sure to just recheck source and destination PMD
after taking the locks and drop the overly-long comment.
Fix generated by an LLM and sent by Chris Mason in private.
[ david: use new helpers consistently; simplify description and comments;
move_ptes() fixup ]14hCVE-2026-99653——
——0In the Linux kernel, the following vulnerability has been resolved:
mm: fix unkillable fault loop on MAP_DROPPABLE memory
handle_mm_fault() suppresses VM_FAULT_OOM for VM_DROPPABLE mappings.
For user-mode faults, pending signals are processed before retrying the
access. Kernel-mode faults on user buffers instead return directly to
the faulting instruction.
With persistent allocation failures (esp. memcg limits), a syscall,
such as write(), can therefore loop while not dropping locks.
Only suppress VM_FAULT_OOM when FAULT_FLAG_USER is set, allowing
kernel-mode faults and GUP to fail and signal allocation errors.
Fix generated by an LLM and sent by Chris Mason in private.
[ david: simplify description ]14hCVE-2026-1317977.1 ALT—
——0Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Imran Tauqeer CubeWP Forms cubewp-forms allows DOM-Based XSS.This issue affects CubeWP Forms: from n/a through 1.1.12.5hCVE-2026-99655——
——0In the Linux kernel, the following vulnerability has been resolved:
mm/memory: reject remote COW faults on PFN mappings
When handling a COW fault without a normal source page (PFN mappings),
__wp_page_copy_user() copies from the faulting user address. For remote
faults, this accesses the wrong address space, resulting in wrong data
getting copied.
For example, user_events updates an enable bit in the registering
process's memory. If that memory needs to be faulted in,
user_event_enabler_fault_fixup() calls fixup_user_fault() from a work
item. Placing the enable bit in a private PFN mapping can trigger this
remote COW path.
Reject these faults with VM_FAULT_SIGBUS when the target mm differs from
current->mm: remote faults. Ordinary (non-PFN) mappings are not affected.
The user-address copy dates back to commit 6aab341e0a28 ("mm: re-architect
the VM_UNPAGED logic"); likely, actual ways to get remote faults in
there on COW PFN mappings appeared afterwards. But the fix is simple and
straight forward.
Fix generated by an LLM and sent by Chris Mason in private.
[ david: simplify comment and description ]14hCVE-2026-1134584.5 MÉD—
——0Mattermost versions 11.10.x <= 11.10.2, 11.11.x <= 11.11.1, 11.7.x <= 11.7.12 fail to validate the format of configured database connection strings before redacting them, which allows a party with access to a generated Support Packet or server log files to recover plaintext database credentials when the connection string is configured in a non-URL format.. Mattermost Advisory ID: MMSA-2026-007831dCVE-2026-82949——
——0The static codes used for information transmission
throughout the 433.92 MHz system of the Guardian 2 system allow an attacker in
proximity to monitor the movements of users inside the premises where the
sensors are set up. This is further aided by the fact that codes transmitted
reveal sensor type, although sensor location cannot be inferred from this
traffic alone.1dCVE-2026-99657——
——0In the Linux kernel, the following vulnerability has been resolved:
mm/mmu_notifier: set ->mm only after mmgrab()
Radeon uses a non-NULL notifier->mm to decide whether to call
mmu_interval_notifier_remove() when freeing a buffer object.
__mmu_interval_notifier_insert() sets ->mm before validating the range,
so a wrapping userptr range can leave ->mm set after insertion fails.
Cleanup then tries to remove an unregistered notifier for which no mm
reference was acquired.
Set ->mm only after mmgrab(), once insertion can no longer fail. While
we could fix radeon's code instead, setting ->mm on success only makes
the code more robust.
Fix generated by an LLM and sent by Chris Mason in private.
[ david: simplify description ]14hCVE-2026-99658——
——0In the Linux kernel, the following vulnerability has been resolved:
mm/mmu_notifier: finish non-blocking interval invalidation on error
When an ordinary MMU notifier rejects a non-blocking invalidation, the
interval invalidation started beforehand is left unfinished: the caller
skips mmu_notifier_invalidate_range_end(). Subsequent interval notifier
operations can then wait forever.
The only in-tree trigger is nouveau SVM, which uses both notifier types
and rejects non-blocking invalidations. Reaping via the OOM reaper or
process_mrelease() can therefore leave the GPU fault worker stuck,
holding a reference that prevents the dying process's address space
and memory from being freed.
End the interval invalidation when an ordinary notifier fails a
non-blocking invalidation, like mn_itree_invalidate() already does when
an interval notifier fails. Make that handling clearer in the
documentation of mmu_notifier_invalidate_range_start_nonblock().
Fix generated by an LLM and sent by Josef Bacik in private.
[ david: simplify description, update function doc ]14hCVE-2026-1317966.5 MÉD—
——0Missing Authorization vulnerability in WP Desk ShopMagic for Google Sheets shopmagic-for-google-sheets allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects ShopMagic for Google Sheets: from n/a through 2.1.10.6hCVE-2026-99663——
——0In the Linux kernel, the following vulnerability has been resolved:
mm/gup: fix clearing folios in memfd_pin_folios()
memfd_pin_folios() pins folios obtained directly from the page cache
without checking whether they are uptodate. However, shmem fallocate()
can leave newly allocated folios uncleared and not uptodate. Callers
such as udmabuf can then expose uninitialized memory to userspace.
Clear non-uptodate folios and mark them uptodate under the folio lock
before returning them to the caller.
Fix generated by an LLM and sent by Chris Mason in private.
[ david: simplify description and comment ]14hCVE-2026-99666——
——0In the Linux kernel, the following vulnerability has been resolved:
mm/khugepaged: fix PMD table lock leak in try_collapse_pte_mapped_thp()
For a private mapping with userfaultfd, try_collapse_pte_mapped_thp()
takes the PMD table lock before it maps the page table for the second time.
If that (pte_offset_map_rw_nolock) fails, because the page table vanished
in the meantime due to concurrent page table reclaim, it leaves through
the abort label, where the PMD table lock is unlocked if it differs from
PTE table lock.
In case the PMD table lock and the PTE table lock match, which is the
case without CONFIG_SPLIT_PTE_PTLOCKS after pte_offset_map_rw_nolock()
failed, we miss to unlock the PMD table.
To fix it, forget the PTE table lock when we unmap+unlock the PTE table.
Fix generated by an LLM and sent by Josef Bacik in private.
[ david: move the ptl = NULL handling; rewrite description, drop wrong comments ]14hCVE-2026-1317958.1 ALT—
——0Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion') vulnerability in thembay Aora aora allows PHP Local File Inclusion.This issue affects Aora: from n/a through 1.3.5.2hCVE-2026-1317635.4 MÉD—
——0Missing Authorization vulnerability in NSquared Simply Schedule Appointments simply-schedule-appointments allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Simply Schedule Appointments: from n/a through 1.6.13.6.12hCVE-2026-1329962.7 BAI—
——0In JetBrains TeamCity before 2026.2 mute and unmute operations via XML-RPC could be attributed to other users22hCVE-2026-1329953.5 BAI—
——0In JetBrains TeamCity before 2026.2 stored XSS on the build step settings page was possible22hCVE-2026-1329942.7 BAI—
——0In JetBrains TeamCity before 2026.2 the REST API exposed details of users not visible in the UI22hCVE-2026-1329796.8 MÉD—
——0In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 stored XSS in the checkout rules editor was possible22hCVE-2026-1329786.8 MÉD—
——0In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 stored XSS in agent requirements was possible22hCVE-2026-1329776.8 MÉD—
——0In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 stored XSS in the Agent Statistics tooltip was possible22hCVE-2026-99670——
——0In the Linux kernel, the following vulnerability has been resolved:
can: dev: can_fill_info(): don't wake up controller if interface is down
If the interface is down, the CAN controller might be powered down and
its clocks gated. Don't call do_get_berr_counter() to read the bus error
counters if the interface is down, and adjust can_get_size() to match.
This removes one trigger for a synchronous external abort seen on
i.MX8QXP when "ip link show" is run on a flexcan interface that was
never brought up. The underlying cause is platform-specific: on i.MX8QXP
the CAN clocks are gated through the SCU LPCG and the subsystem shares
the IMX_SC_R_CAN_0 power domain, and there is a window after
pm_runtime_resume_and_get() returns where the clock has not reached the
module yet. This patch avoids the netlink query path while the interface
is down, but does not root-cause the LPCG window itself.
As a result, IFLA_CAN_BERR_COUNTER is no longer reported for down
interfaces. Userspace must treat the attribute as optional.
The issue was triggered on an i.MX8QXP board by running "ip link show"
without ever bringing the interface up:
Internal error: synchronous external abort: 0000000096000210
pc : flexcan_read_le+0x0/0x18
lr : flexcan_get_berr_counter+0x4c/0x8c
Call trace:
flexcan_read_le+0x0/0x18
flexcan_get_berr_counter+0x4c/0x8c
can_fill_info+0x1f8/0x434
rtnl_fill_ifinfo+0x8fc/0xbb4
rtnl_dump_ifinfo+0x364/0x448
This is the same class of problem fixed for m_can in
commit 91a55c72a821 ("can: m_can: m_can_get_berr_counter(): don't
wake up controller if interface is down").14hCVE-2026-99674——
——0In the Linux kernel, the following vulnerability has been resolved:
can: dev: can_dropped_invalid_skb: drop CAN XL frames on non-CAN XL devices
Sending a PF_PACKET bypasses the CAN framework logic and can directly
reach a CAN driver's xmit() function. The PF_PACKET framework only
checks that skb->len does not exceed the net_device MTU.
For a CAN device that is not CAN XL capable, anything above CANFD_MTU
(72 bytes) is therefore dropped before it reaches the driver. However,
CAN XL frames are variable length. can_is_canxl_skb() accepts lengths in
the range CANXL_HDR_SIZE + CANXL_MIN_DLEN up to CANXL_MTU, i.e. 13 to
2060 bytes.
As a result, an ETH_P_CANXL skb with a length between 13 and 72 bytes
can pass both the MTU and the can_dropped_invalid_skb() checks.
A driver that does not support CAN XL will interpret canxl_frame->flags
as a length because of the overlap with can_frame->len. And because
CANXL_XLF is set, the resulting length is between 128 and 255. For
drivers that do not check can_frame->len before copying can_frame->data,
as most drivers do, this results in a buffer overflow of up to 247
bytes.
Drop ETH_P_CANXL skbs if the device does not have the CAN_CAP_XL
capability. Keep can_is_canxl_skb() for the validation of CAN XL skbs.14hCVE-2026-1330436.5 MÉD—
——0In JetBrains TeamCity before 2026.2.1 missing authorization allowed reading VCS file contents and patches of other projects3hCVE-2026-99675——
——0In the Linux kernel, the following vulnerability has been resolved:
nvmet: reject keep-alive timeouts that would overflow
nvmet_set_feat_kato() and nvmet_alloc_ctrl() convert the 32-bit
millisecond KATO from the host to seconds with DIV_ROUND_UP(kato, 1000).
The addition in DIV_ROUND_UP() is done in 32 bits, so any KATO above
4294966296 ms wraps around and rounds to 0 seconds. A Set Features
command with KATO 0xffffffff then succeeds but disables the keep-alive
timer: Get Features returns 0 and Keep Alive fails with Keep Alive
Timeout Invalid. A Connect command with such a KATO creates a controller
without a keep-alive timer.
The converted value has more consumers that can overflow. Get Features
multiplies it by 1000, and the timer paths multiply it by HZ in 32 bits
and arm a delay that must not exceed MAX_JIFFY_OFFSET.
Reject a KATO whose rounded value does not fit all of these. Return Keep
Alive Timeout Invalid from both Set Features and Connect. Validate Set
Features before stopping the current timer so a failed update leaves its
timeout unchanged. Round in 64 bits. A KATO of 0 keeps its current
meaning.14hCVE-2026-99676——
——0In the Linux kernel, the following vulnerability has been resolved:
net: restore refcount ordering for lockless socket access
Before commit fb041bb7c0a9 ("locking/refcount: Consolidate implementations
of refcount_t"), default builds implemented refcount_inc_not_zero() using
atomic_add_unless(), which provided full memory ordering on success. The
commit removed that ordering on weakly ordered architectures, allowing
accesses after a successful reference acquisition to be reordered before
it.
Use refcount_inc_not_zero_acquire() in the IPv4 and IPv6 established
lookups and in inet_twsk_purge(), where the socket is validated again
after taking a reference.
bpf_sk_assign() can receive a socket pointer obtained through BTF
without a reference. Use acquire ordering when it takes its own reference
for a refcounted socket.
Use refcount_set_release() when setting refcounts in the SYN cookie,
TCP Fast Open, request migration, and TIME_WAIT paths. Keep the existing
TIME_WAIT smp_wmb(), which separately orders the refcount store before
ehash publication.14hCVE-2026-99680——
——0In the Linux kernel, the following vulnerability has been resolved:
xfs: mark the inode preallocated for pNFS write layouts past EOF
xfs_fs_map_blocks() marks the inode XFS_DIFLAG_PREALLOC only when it
allocates blocks for a write layout. A write layout past EOF can also
hand out allocated blocks, such as speculative preallocation. blockgc
then frees them under the layout, and another file may get them.
Mark the inode whenever a write mapping ends past EOF.14hCVE-2026-1329766.8 MÉD—
——0In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 stored XSS in the Inspections (IntelliJ IDEA) build step editor was possible22hCVE-2026-1329756.8 MÉD—
——0In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 stored XSS in issue tracker links was possible22hCVE-2026-1317406.5 MÉD—
——0Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in WProyal Royal Elementor Addons royal-elementor-addons allows Stored XSS.This issue affects Royal Elementor Addons: from n/a through 1.7.1069.5hCVE-2026-1317195.3 MÉD—
——0Missing Authorization vulnerability in Liquid Web / StellarWP Event Tickets event-tickets allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Event Tickets: from n/a through 5.31.1.12hCVE-2026-1317045.3 MÉD—
——0Improper Neutralization of Script-Related HTML Tags in a Web Page (Basic XSS) vulnerability in WPMU DEV Hustle wordpress-popup allows Code Injection.This issue affects Hustle: from n/a through 7.8.14.5.6hCVE-2026-1317035.3 MÉD—
——0Missing Authorization vulnerability in Podlove org Podlove Podcast Publisher podlove-podcasting-plugin-for-wordpress allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Podlove Podcast Publisher: from n/a through 4.5.8.3hCVE-2026-1316995.3 MÉD—
——0Missing Authorization vulnerability in Bootstrapped Ventures WP Recipe Maker wp-recipe-maker allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects WP Recipe Maker: from n/a through 10.9.2.2h