Vulnerabilities exploitable today
402,410in current view
Single score combining CVSS, KEV membership and EPSS. Every CVE with its own record — timeline from publication to active exploitation.
In KEV catalog1,754
New KEV · 24H0
Exploit Today ≥ 701,668
Distribution · last window
- Critical3,545
- High15,903
- Medium14,814
- Low1,453
Filters
Window
Severity
Flags
CVECVSSEPSSKEVRExploitTitleMod.
CVE-2026-568387.8 HIG—
———PraisonAI is a multi-agent teams system. From version 4.5.87 to before version 4.6.59, PraisonAI recipe execution blocks default-denied dangerous tools unless the caller explicitly passes allow_dangerous_tools=True. The normal recipe.run() path enforces this with _check_tool_policy(). The streaming path, recipe.run_stream(), loads the same recipe, checks dependencies, and then calls _execute_recipe() without running the dangerous-tool policy check. As a result, a recipe that honestly declares execute_command in TEMPLATE.yaml requires.tools is denied by recipe.run(), but reaches the execution engine through recipe.run_stream() with allow_dangerous_tools=False. This issue has been patched in version 4.6.59.11hCVE-2026-568378.6 HIG—
———PraisonAI is a multi-agent teams system. From version 4.6.56 to before version 4.6.59, PraisonAI's LinearBot starts a public webhook listener on 0.0.0.0 and treats LINEAR_WEBHOOK_SECRET as optional. When the secret is absent, startup only logs a warning and _handle_webhook() skips Linear-Signature verification entirely. An unauthenticated network caller who can reach the webhook endpoint can submit a forged Linear-Event: AgentSession request. The forged request is parsed, scheduled for background processing, dispatched to _handle_agent_session(), and passed into BotSessionManager.chat(). The bot then attempts to post the agent response back to Linear under the configured bot token. The PoV is offline and deterministic. It does not contact Linear. It calls the webhook handler directly, monkey-patches the outbound Linear comment path, and proves both sides of the boundary. This issue has been patched in version 4.6.59.11hCVE-2026-568368.2 HIG—
———PraisonAI is a multi-agent teams system. From version 4.5.112 to before version 4.6.59, PraisonAI's installed console entrypoint is Typer-first. In current releases, the recipe command is registered in the Typer app and praisonai recipe serve dispatches to the deprecated Typer command in src/praisonai/praisonai/cli/commands/recipe.py. That Typer command can start the Recipe HTTP server on a non-localhost interface with no authentication. It prints a deprecation warning, and then launches the server. Because config.auth is absent, create_app() does not attach the API-key or JWT middleware. Unauthenticated requests can then reach the recipe API and, when enabled, /admin/reload. This issue has been patched in version 4.6.59.11hCVE-2026-568358.3 HIG—
———PraisonAI is a multi-agent teams system. From version 3.11.0 to before version 4.6.59, PraisonAI's Slack bot applies its configured allowed_users, allowed_channels, and unknown-user pairing policy in the normal Slack message event handler, but not in the adjacent Slack app_mention event handler. A Slack workspace user who can mention the bot in a channel where the Slack app is present can trigger the configured PraisonAI agent even when: the sender is not in BotConfig.allowed_users; the channel is not in BotConfig.allowed_channels; unknown_user_policy="deny" is configured; and the same event content is correctly dropped by the normal message handler. This issue has been patched in version 4.6.59.11hCVE-2026-568347.5 HIG—
———PraisonAI is a multi-agent teams system. From version 3.8.1 to before version 4.6.59, PraisonAI's Dynamic Context Discovery feature exposes artifact helper tools through ctx.get_tools(). The implemented artifact tools do not enforce that the supplied artifact_path is an artifact created by the configured store or that it lives under the configured artifact base directory. Instead, artifact_head, artifact_tail, artifact_grep, and artifact_chunk wrap the caller-supplied path directly into an ArtifactRef and then read it from the host filesystem. As a result, any prompt/user/tool-caller that can influence those tool arguments can read files readable by the PraisonAI process, such as project .env files, cloud credentials, SSH keys, source files, or other local data. This issue has been patched in version 4.6.59.11hCVE-2026-98962——
———In the Linux kernel, the following vulnerability has been resolved:
btrfs: free iov when btrfs_uring_read_extent() fails
After btrfs_uring_read_extent(), the caller always jumped to out_acct.
That skips kfree(data->iov), which is only correct for -EIOCBQUEUED
where the deferred path owns the iov. On failure, fall through to
out_free instead.10hCVE-2026-568337.5 HIG—
———PraisonAI is a multi-agent teams system. From version 3.8.1 to before version 4.6.59, PraisonAI's Dynamic Context module provides filesystem-backed history and terminal-log storage. The module also exports agent-callable tool factories. Those tools accept run_id and agent_id arguments from the tool caller. The underlying stores join those values into filesystem paths without rejecting absolute paths or .. traversal. Because run_id can be an absolute path and agent_id can contain traversal, a lower-trust prompt/user that can call these tools can read .jsonl and .log files outside the configured Dynamic Context base directory. This issue has been patched in version 4.6.59.11hCVE-2026-98963——
———In the Linux kernel, the following vulnerability has been resolved:
btrfs: always return -EIOCBQUEUED after btrfs_uring_read_extent_endio
If all bios finish before btrfs_encoded_read_regular_fill_pages()
returns, it calls btrfs_uring_read_extent_endio() and previously
returned the I/O status. A negative errno then made
btrfs_uring_read_extent() unlock and free while
btrfs_uring_read_finished() did the same again.
Return -EIOCBQUEUED so only the deferred path cleans up.10hCVE-2026-568328.8 HIG—
———PraisonAI is a multi-agent teams system. From version 4.5.2 to before version 4.6.59, praisonai.bots.DiscordApproval approves a pending dangerous tool call when it sees any later non-bot message in the configured Discord channel whose text is classified as approval, such as yes. As a result, any user who can post in the configured approval channel can approve a pending high-risk tool call by sending yes after the approval message appears. the same PoV also shows that the Slack and Telegram messaging approval backends have no explicit approver allowlist parameter, but the primary report-grade issue is the Discord backend's unthreaded channel cross-talk: the approving message does not need to be a reply or otherwise request-bound. This issue has been patched in version 4.6.59.11hCVE-2026-1157278.1 HIG—
———AgenticSeek before commit 409840c contains a remote code execution vulnerability because llm_server/app.py hardcodes Flask debug mode while binding to all interfaces. Attackers who reach the server port and obtain the derivable Werkzeug debugger PIN can execute Python code and operating system commands with llm_server privileges.8hCVE-2026-1157267.8 HIG—
———Aider through 0.86.2 contains a command execution vulnerability that allows attackers to run shell commands by committing a malicious .aider.conf.yml that is auto-loaded without a trust prompt. Attackers can set notifications-command or editor values that are executed via subprocess with shell=True after model replies or /editor use, running commands with the victim's privileges.11hCVE-2026-1157254.2 MED—
———Chatwoot before 4.17.0 contains an authorization bypass vulnerability that allows authenticated agent bots to access other accounts by supplying a foreign contact inbox source_id. Attackers can call the conversations create endpoint with another account's source_id to create or retrieve conversations and post messages to that account's contacts.11hCVE-2026-1157242.9 LOW—
———VLC for Android before 3.7.2 contains a confused-deputy file overwrite vulnerability in FileUtils.getUri() that trusts content URIs based only on the com.fsck.k9.attachmentprovider or gmail-ls authority. A co-installed app without permissions can declare these authorities and send a crafted VIEW intent to the exported StartActivity, making VLC write attacker-chosen content under an attacker-chosen name in the shared Download directory, overwriting other apps' files when VLC holds All files access.11hCVE-2026-1157237.4 HIG—
———Snap7 through 1.4.3 contains an out-of-bounds write vulnerability in the passive partner that allows a malicious active partner to overflow application buffers by declaring an unvalidated BSend total length. Attackers connecting from the configured peer address can declare up to 65535 bytes and send a short fragment, causing BRecv to memcpy past the buffer and crash or corrupt SCADA, HMI or gateway processes.8hCVE-2026-1157226.1 MED—
———RPly through 1.1.4 contains an improper array index validation vulnerability in ply_read_header_property() that accepts list as a list property's length or value type. Attackers can supply a crafted PLY file that makes ply_read_list_property() call an out-of-bounds handler, crashing ASCII parsing or corrupting memory in binary parsing.11hCVE-2026-1129048.7 HIG—
———Vvveb is a powerful and easy to use CMS with page builder to build websites, blogs or ecommerce stores. In versions 1.0.8.6 and prior, the nextRestore() and nextBackup() functions in the backup controller accept a file GET parameter and concatenate it directly to DIR_BACKUP without calling sanitizeFileName(). This allows an authenticated administrator to read arbitrary files on the server (via nextRestore) and write SQL dump content to arbitrary locations (via nextBackup). This is inconsistent with the sibling functions restore(), delete(), and download() which all correctly call sanitizeFileName() first. This issue has been patched via commit aa29cb0.11hCVE-2026-98964——
———In the Linux kernel, the following vulnerability has been resolved:
nvmet: use the local P2P device on metadata allocation failure
nvmet_req_alloc_p2pmem_sgls() assigns req->p2p_dev only after the data
and metadata SGL allocations succeed. If the data allocation succeeds
but the metadata allocation fails, out_free_sg passes req->p2p_dev to
pci_p2pmem_free_sgl() before that assignment has taken place.
Pass the local p2p_dev argument instead, so cleanup uses the same PCI
device as the successful data allocation.10hCVE-2026-1119654.3 MED—
———The Profile Builder WordPress plugin from 4.0.0 to 4.0.4 does not enforce its reCAPTCHA verification on all comment submission paths, allowing authenticated users to bypass the anti-spam protection an administrator configured for the WordPress comment form.9hCVE-2026-107685——
———Improper Certificate Validation vulnerability in the WebSocket streaming client in agentjido req_llm allows an on-path attacker to read and modify OpenAI WebSocket sessions, including the authorization bearer token, via a TLS certificate the client does not trust. ReqLLM.Streaming.WebSocketSession.Client.start/3 in lib/req_llm/streaming/web_socket_session/client.ex starts WebSockex without TLS options, and WebSockex defaults to insecure: true, which connects with verify: :verify_none. The option allowlist also drops any caller-supplied cacerts or ssl_options, so an application cannot turn verification on.
The OpenAI Responses, Realtime, and Codex WebSocket paths reach this client and send the API key or OAuth access token in the authorization header. HTTP streaming through Finch and the HTTP/2 duplex session through Mint verify certificates and are not affected.
This issue affects req_llm: from 1.9.0 before 1.29.0.11hCVE-2026-98965——
———In the Linux kernel, the following vulnerability has been resolved:
ice: Restore Ordered MMIO Writes for Tx Doorbells
The DQL accounting state which tracks the number of bytes queued for the
NIC to transmit, namely dql->num_queued, is updated by the ICE driver
when it invokes __netdev_tx_sent_queue(). Subsequently the driver
updates the hardware queue tail allowing the NIC to begin processing the
work queue. The queue accounting update should be ordered before the NIC
begins transmitting descriptors.
The transmit path currently updates the hardware doorbell using
writel_relaxed(), which (on arm64) does not provide the same ordering
guarantees between writes to normal memory and writes to MMIO registers
that writel() does. This introduces a potential race where the NIC
begins transmitting descriptors before the dql->num_queued update is
globally visible. If the NIC finishes before the update is observed by
dql_completed(), it detects an invalid state where more bytes have been
completed than have been queued. When this happens the following BUG_ON
is triggered.
BUG_ON(count > num_queued - dql->num_completed);
This has been observed and manifests as the following crash (note that
the trace has been trimmed) in an environment with sustained network
load that uses an Intel Corporation Ethernet Controller E810-XXV for SFP
(rev 02) on an arm64 machine. Replacing writel_relaxed() with writel()
in a test kernel eliminated the crash in the user's workload, which
previously reproduced the issue reliably.
kernel BUG at lib/dynamic_queue_limits.c:99
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
pc : dql_completed+0x268/0x2a0
lr : ice_clean_tx_irq+0x1d4/0x620 [ice]
Call trace:
dql_completed+0x268/0x2a0 (P)
ice_napi_poll+0x94/0x520 [ice]
__napi_poll+0x48/0x3f0
net_rx_action+0x194/0x420
This restores the behaviour prior to commit ccde82e90946 ("ice: add E830
Earliest TxTime First Offload support"), which changed the notification
mechanism from writel() to writel_relaxed().10hCVE-2026-98966——
———In the Linux kernel, the following vulnerability has been resolved:
bonding: fix the program leak when XDP is replaced
We need to release the reference on the old BPF prog, whether
we are going to no-prog, or replacing the prog with another.
Spotted by AI while running tests for the propagation series
(leaked programs were accumulating). Selftest will come in
the net-next series to avoid conflicts.10hCVE-2026-98967——
———In the Linux kernel, the following vulnerability has been resolved:
cxgb4/ch_ktls: disable softirqs around tid_list erases
chcr_ktls_cpl_act_open_rpl() inserts into tid_list from the receive path
using xa_insert_bh(). The array is shared by the adapter's connections
and initialized with XA_FLAGS_LOCK_BH. However, chcr_ktls_dev_del() and
the chcr_ktls_dev_add() error path use xa_erase(), which takes the XArray
lock without disabling softirqs.
When cleanup runs with softirqs enabled, a receive softirq for another
connection on the same CPU can interrupt the erase and spin on the lock
held by the interrupted task. Use xa_erase_bh() at both sites to match
the insertion path.10hCVE-2026-98968——
———In the Linux kernel, the following vulnerability has been resolved:
amt: send the relay's General Query directly from the receive path
An skb queued in a qdisc can outlive the tunnel it references
through a raw pointer in skb->cb. For example, with igmp_qrv set
to 1 on the relay a tunnel lives for 135s, so a netem delay of
180s on the amt device outlives it; when the tunnel expires and is
freed, the subsequent dequeue triggers a use-after-free in
amt_dev_xmit().
BUG: KASAN: slab-use-after-free in amt_dev_xmit+0x2763/0x2e20
Call Trace:
amt_dev_xmit+0x2763/0x2e20 [drivers/net/amt.c:1262]
dev_hard_start_xmit+0x22f/0x620
sch_direct_xmit+0x12e/0xac0
netem_dequeue+0x333/0xc50
net_tx_action+0x35c/0xa60
amt_send_igmp_gq() and amt_send_mld_gq() are only called from
amt_request_handler(), inside the rcu_read_lock_bh() section of
amt_rcv(). amt_request_handler() already has the tunnel the query is
for: it found or created it inside that section. Queuing the query with
dev_queue_xmit() only leads back into amt_dev_xmit(), which strips the
Ethernet header and calls amt_send_membership_query() for that tunnel.
Make that call directly from the two senders instead, the same way
amt_send_advertisement() transmits from the receive path. The query
never waits in a qdisc, the tunnel is only dereferenced inside the
RCU section that found or created it, and nothing is stored in
skb->cb, so no lookup or refcount is needed. Remove the query branch
of amt_dev_xmit(), amt_skb_cb() and struct amt_skb_cb, which have no
users left.
Behaviour changes:
- The relay's own General Queries no longer pass through the amt
device's egress path: its qdisc, tc egress (clsact/tcx), the
netfilter egress hook and packet taps. They are still visible as
UDP on the underlay.
- A query that is sent successfully is no longer counted as
tx_dropped. The old query branch left through the unlock label,
which counted every sent query as dropped.
- A query that reaches amt_dev_xmit() on a relay from elsewhere,
such as a userspace querier, is now dropped at the IGMP/MLD type
switch. Before, it trusted whatever skb->cb held, and a NULL
tunnel hit the WARN_ON(1).10hCVE-2026-98969——
———In the Linux kernel, the following vulnerability has been resolved:
net/sched: em_text: reject unterminated algo before autoload
This is a follow-up to commit 9c572a83037a ("net/sched: fix potential
stack infoleak in em_text_dump()"), which zero-initialised the dump-side
struct. Sashiko pointed at a pre-existing bug that exposed the change-side
input-validation gap open.
em_text_change() casts the raw netlink attribute payload to struct
tcf_em_text and passes conf->algo, a 16-byte array with no enforced NUL
terminator, to textsearch_prepare(). On the TS_AUTOLOAD retry
textsearch_prepare() calls request_module("ts_%s", algo); vsnprintf()
walks %s until it finds a NUL, so an algo[] with no NUL reads past the
array into the adjacent struct fields and payload and feeds those bytes
to the usermode helper command line. This is an out-of-bounds read and
a kernel memory disclosure.
Reject the attribute when no NUL exists within TC_EM_TEXT_ALGOSIZ bytes,
matching the check xt_string has had since 3ab720881b6e.
Conditions to recreate the bug:
- CAP_NET_ADMIN on the target netns (namespace-local via unshare -Urn
is enough)
- install clsact on an interface, then add a basic filter with one text
ematch whose algo[] is 16 bytes with no NUL (e.g. "A"*16) and
pattern_len at least 1
- the add fails with -ENOENT and the kernel invokes modprobe with a
module name made of "ts_" plus the 16 bytes and the adjacent payload10hCVE-2026-98970——
———In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Free the BO cache size list on teardown
vc4_bo_cache_destroy() purges the cached BOs but never frees the size
list, leaking it on every unbind.10hCVE-2026-98971——
———In the Linux kernel, the following vulnerability has been resolved:
gpio: exar: initialize the ID before registering its cleanup
devm_add_action_or_reset() invokes the cleanup action immediately when
registering the action fails. gpio_exar_probe() currently stores the
allocated ID in exar_gpio only after registering the action, so that
failure makes exar_devm_ida_free() release ID 0. If the allocated ID is
nonzero, this leaks that ID and can free ID 0 belonging to another device.
Store the ID before registering the cleanup action so both the immediate
failure path and normal device teardown release the correct allocation.10hCVE-2026-99065——
———In the Linux kernel, the following vulnerability has been resolved:
cgroup/cpuset: Handle cpu hotplug race in guarantee_active_cpus()
With commit 2125c0034c5d ("cgroup/cpuset: Make cpuset hotplug processing
synchronous"), the cpuset hotplug operation becomes synchronous. That
commit also removes the code that handles race between cpuset_hotplug_work
and cpu hotplug notifier with the assumption that race is now gone.
Later commit 7a0aabd9ce69 ("cgroup/cpuset: Always use cpu_active_mask")
updates the cpuset code to always use cpu_active_mask instead of
cpu_online_mask in some places including guarantee_online_cpus() which
is renamed to guarantee_active_cpus() in that commit.
In the case of CPU offline operation, cpu_active_mask is updated
first in sched_cpu_deactivate() to remove the offline CPU before
cpuset_handle_hotplug() is called to update the effective_cpus of the
affected cpusets. The cpu_online_mask is updated after that near the end
of the offline operation to remove the offline CPU. As a result, the race
comes back and the top cpuset may not have any active CPU leading to NULL
pointer dereference during the race window when guarantee_active_cpus()
is called after cpu_active_mask is updated to remove the CPU to be torn
down but before cpuset_handle_hotplug() is able to properly update the
effective_cpus of the top cpuset.
Fix this by adding back the NULL cs check to avoid this problem.10hCVE-2026-99036——
———In the Linux kernel, the following vulnerability has been resolved:
dm: fix reading free memory in do_resume
When do_resume calls dm_table_get_mode(new_map), the call is done without
holding any locks (it only holds a reference to the md). It may be
possible that another concurrent ioctl on the same device will swap table
after dm_swap_table and before dm_table_get_mode. In this case,
dm_table_get_mode(new_map) reads freed memory.
This race condition was triggered by syzbot.
This commit fixes the race by reading mode of the new table before
dm_swap_table. Note that new_map is also passed to dm_ima_need_measure,
but this function doesn't attempt to dereference it, so this call should
be safe.
Note that this is not a security bug because only root can trigger it and
the commonly used tools such as lvm or cryptsetup do not call the ioctls
concurrently, so that they can't trigger it acceidentally.10hCVE-2026-1146218.8 HIG—
———baserCMS is a website development framework. In versions 5.0.0 before 5.3.2 and 5.4.0 before 5.4.2, list and detail actions in the Admin and Api/Admin prefixes pass request query parameters, including contain, conditions, fields, finder, and order, directly to the ORM as options. A user able to log into the admin panel can embed SQL fragments in those options to execute arbitrary SQL against the application's database, including reading password hashes from the users table. Public-page and public-API fixes released in 5.3.1 and 5.4.1 did not protect these administrative paths. Setting USE_CORE_ADMIN_API to false does not prevent access through an authenticated browser session. This issue has been patched in versions 5.3.2 and 5.4.2.7hCVE-2026-98972——
———In the Linux kernel, the following vulnerability has been resolved:
cgroup/cpuset: Don't access cpuset_cgrp_subsys.root in is_in_v2_mode()
After seeing the patch [1] to guard is_in_v2_mode() with RCU, it makes
me realize that is_in_v2_mode() may be called in a context where a new
cgroup filesystem is being rebound with stale cpuset_cgrp_subsys.root
pointer. Avoid this potential UaF situation by adding a new cpuset_v2_mode
flag which is set when the cpuset_v2_mode mount option is used. This
flag is written into only when cpuset_bind() is being called with a
stable cpuset_cgrp_subsys.root value. The is_in_v2_mode() helper is
modified to read the new cpuset_v2_mode flag instead of accessing
cpuset_cgrp_subsys.root directly.
[1] https://lore.kernel.org/lkml/20260929084124.626693-2-arighi@nvidia.com10hCVE-2026-98973——
———In the Linux kernel, the following vulnerability has been resolved:
drm/bridge: Fix unlocked list_del in drm_bridge_add()
When re-adding a bridge that was previously removed, drm_bridge_add()
drops it from bridge_lingering_list without holding bridge_lock.
Both bridge_list and bridge_lingering_list are protected by bridge_lock,
as they are concurrently modified by drm_bridge_remove() and
__drm_bridge_free(), and walked by the debugfs 'bridges' file. Running
the list_empty() test and the list_del_init() outside of the lock may
therefore corrupt either list.
Perform both under bridge_lock.10hCVE-2026-98974——
———In the Linux kernel, the following vulnerability has been resolved:
xfs: fix exchange-range-to-eof file size exchange
Norbert Szetei posted a patch containing an incomplete description of a
bug in XFS_IOC_EXCHANGE_RANGE's TO_EOF flag. The bug tricks
exchange-range into modifying a file so that it has shared blocks
starting beyond EOF, which is never allowed because files never have
written data beyond EOF, and you can only share written data blocks.
This is key to all the incorrect behavior that follows.
Eventually I got from Norbert a description of what's going wrong:
> Fair. Here it is with physical block numbers, 4k blocks. peer is the file
> that gets rewritten and file1 is the one that ends up with the flag
> cleared.
>
> Start, nothing shared:
>
> peer size 4096 -> [100]
> file1 size 12288 -> [200] [201] [202]
> donor1 size 4096 -> [300]
> donor2 size 4096 -> [400]
>
> 1. FICLONERANGE peer's block into file1's middle slot:
>
> peer size 4096 -> [100]
> file1 size 12288 -> [200] [100] [202] reflink flag set
> ^^^^^ both files own block 100
>
> 2. XFS_IOC_EXCHANGE_RANGE file1 against donor1, file1_offset 0,
> file2_offset 8192, length 0, TO_EOF. One block is exchanged, and the sizes
> are exchanged with it:
>
> file1 size 4096 -> [200] [100] [300] reflink flag set
> ^^^^^^^^^^^ still owned, now past the size
> donor1 size 12288 -> [202]
>
> file1 says it is one block long while it still owns three. Nothing was
> unmapped. file2_offset is block 2, so this exchange cannot clear a flag.
>
> 3. XFS_IOC_EXCHANGE_RANGE file1 against donor2, both offsets 0, length 4096.
> By i_disk_size this is two one-block files exchanging everything, so
> xmi_can_exchange_reflink_flags() agrees and the flag is cleared:
>
> file1 size 4096 -> [400] [100] [300] reflink flag CLEARED
> donor2 size 4096 -> [200]
>
> Block 100 is still shared with peer.
>
> 4. pwrite(file1, 4096, 4096), which is file1's second slot, block 100.
> xfs_is_cow_inode(file1) is false, so no CoW:
>
> peer size 4096 -> [100] same block, new contents
>
> Block 100 is the only one that matters here. PoC below, it reads a file
> called peer in the current directory. The filesystem needs reflink and
> exchange-range, which mkfs.xfs 7.x turns on by default.
So yes, TO_EOF is screwing up the file size even if it's actually
exchanging the data block correctly. The following is the intended
behavior of XFS_EXCHANGE_RANGE_TO_EOF, as described by its manpage:
"Ignore the length parameter. All bytes in file1_fd from file1_offset
to EOF are moved to file2_fd, and file2's size is set to
(file2_offset+(file1_length-file1_offset)). Meanwhile, all bytes in
file2 from file2_offset to EOF are moved to file1 and file1's size is
set to (file1_offset+(file2_length-file2_offset))."
In other words, if we only exchange a portion of the file data, then we
should only exchange the portion of the file size that relates to the
exchanged data. Unfortunately, the code swaps the ondisk file size and
the incore file sizes, which is incorrect if the caller passes in a
nonzero offset.
Having confused the file sizes, the PoC uses a second exchange-range
call on what looks like a non-reflinked single-block file. Because the
file size is set incorrectly, exchange-range thinks it's exchanging the
full contents of two files and clears the reflink flag on the broken
file. That enables an extending write of the broken file to rewrite the
shared block that's just past EOF. This has become known colloquially
as refluxfs.
Once the file sizes are set correctly, the second exchange-range no
longer thinks that it's doing a full-contents swap, so it won't clear
the reflink flag on either of its file arguments.
Norbert followed up to an earlier version of this patch with a second
complaint about us not handling the i_disk_size state correctly:
> The offsets are bounded against the incore i_size but subtracted from
>
---truncated---10hCVE-2026-98975——
———In the Linux kernel, the following vulnerability has been resolved:
xfs: stop exchanging reflink flags when exchanging mappings
When an exchange covers both files from offset 0 to i_disk_size,
xmi_can_exchange_reflink_flags() assumes every mapping moved and hands
the reflink flag over to the other file.
That assumption is wrong. A file can still own shared blocks past
i_disk_size, e.g. after EXCHANGE_RANGE_TO_EOF sets a smaller size
without unmapping anything. The flag is cleared anyway, and the next
write to such a block happens in place instead of CoW, corrupting the
other file that shares it.
Commit a23eca88448e ("xfs: fix exchange-range reflink flag clearing
issue with INO1_WRITTEN") fixed one instance of this. Rather than add
another special case, stop moving the flags.
xfs_exchmaps_ensure_reflink() already sets the flag on both inodes
before the exchange, so both just keep it.
Nothing sets CLEAR_INO{1,2}_REFLINK anymore. Intents logged by older
kernels may still carry them; recovery already masks them off, so they
stay in the log format mask and are ignored.
XFS_IOC_SWAPEXT has the same problem: it moves the reflink flag from
one inode to the other along with the extents. Just removing that is
not enough here: the exchange path flags both inodes up front in
xfs_exchmaps_ensure_reflink(), but swapext has no such step, so the
inode receiving the shared extents would be left without the flag.
Set it on both inodes instead, and make sure both have a CoW fork,
since an inode with the reflink flag is expected to have one.
The flag now stays until FALLOC_FL_UNSHARE_RANGE, xfs_scrub, or a
truncate to zero removes it.10hCVE-2026-98976——
———In the Linux kernel, the following vulnerability has been resolved:
namespace: keep the lock on a mount that a propagated copy is moved beneath
attach_recursive_mnt() transfers MNT_LOCKED from the top mount to the
mount that is moved beneath it with MOVE_MOUNT_BENEATH. This allows the
owner of a user namespace to replace its locked /proc or its root. The
mount beneath takes on the job of covering the underlying mountpoint
allowing the top mount to be unmounted.
Consider two mount namespaces:
(H) The host H has a shared mount P with a secret in P/d
(Z) Z is a user namespace made from M. Its copy of P receives
propagation from the host's P and its copy of M's cover on P/d is
locked Z's owner must not get to see P/d.
Now (H) mounts X on P/d. This propagates into (Z). The copy of X lands
beneath (Z)'s locked cover. The locked property is transfered from (Z)'s
cover to the copy of X propagated beneath it. The cover is now unlocked.
Now (H) unmounts X again. The copy of X in (Z) gets unmounted and the
covering mount is left unlocked on top of P/d. (Z) can now unmount it:
Z: umount2(P/d) = EINVAL /* the cover is locked */
H: mount X on P/d, umount X /* both propagate into Z /*
Z: umount2(P/d) = 0 /* the cover is now unlocked */
Z: read P/d/secret = "covered-by-root" /* secret revealed */
So only transfer the locked property to the mount beneath for mounts the
caller has placed. A propagated copy that lands beneath a locked mount
is locked as well so that the mount at the bottom of the stack carries a
lock the way every check expects. The mount on top of it remains locked
to ensure that it keeps covering even if the propagated mount is
unmounted again.10hCVE-2026-115516——
———Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.15hCVE-2026-98977——
———In the Linux kernel, the following vulnerability has been resolved:
namespace: handle mount locking for automounts correctly
If mounts are propagated across user namespaces, attach_recursive_mnt()
locks every copy of the source mount to protect overmounts from
vanishing and revealing the underlying files or directories.
The user namespace is taken from the caller's mount namespaces since
this is where the mounts end up. Except, that's not always true.
Automounts may legitimately get popped in by tasks located in a
different mount and user namespace during path lookup.
Then check doesn't make sense at that point. The copy in the namespace
of the parent - which may be the host's - is now locked and the host
cannot change the flags of its own mounts anymore.
Here's the reproducer:
- host has debugfs mounted nosuid,nodev,noexec and shared
- tracefs automount below it is not yet active
- hand a child process a directory descriptor on that mount
- child process enters auser and mount namespace
- child process' namespace now holds a locked copy of the host's debugfs
mount that receives propagation from it
- child process stats "tracing/." through the descriptor
- lookup runs on the host's mount so the automount lands below the host's mount
- propagation puts a copy below the child's copy
- both try to clear the flags on the mount they got, with a bind remount:
host, on its own automount: MS_REMOUNT|MS_BIND = EPERM
child, on the copy in its namespace: MS_REMOUNT|MS_BIND = 0
So the lock landed on the host's mount instead of the child's copy.
Congrats. So we need to compare with the owner of the namespace the
mount actually gets mounted on. For all regular cases that is the
caller's mount namespace and so nothing changes.
Detached trees in anonymous mount namespaces by be handed over via
SCM_RIGHTS or inherited in other ways on purpose so the attaching task's
mount namespace is authoritative, not the creator of the detached tree.10hCVE-2026-99066——
———In the Linux kernel, the following vulnerability has been resolved:
can: dev: init_can_skb(): restore skb header initialization
Commit 9f10374bb024 ("can: remove private CAN skb headroom infrastructure")
removed the skb_reset_mac_header()/skb_reset_network_header()/
skb_reset_transport_header() calls from init_can_skb(). As a result, RX
skbs from alloc_can_skb() and friends again carry mac_header = 0xFFFF.
When such an skb reaches packet_rcv_spkt() (SOCK_PACKET), the push length
calculation overflows and triggers skb_under_panic -> kernel BUG -> full
machine panic.
The same issue was originally reported in 2014 on linux-can and fixed by
commit 969439016d2c ("can: add missing initialisations in CAN related
skbuffs"). packet_rcv_spkt() itself has never been hardened: only
packet_rcv() and tpacket_rcv() gained dev_has_header() checks in
commit d549699048b4 ("net/packet: fix packet receive on L3 devices
without visible hard header").10hCVE-2026-99067——
———In the Linux kernel, the following vulnerability has been resolved:
btrfs: scrub: fix local_root reference leak in scrub_print_warning_inode()
When paths_from_inode() fails, scrub_print_warning_inode() jumps to err
without dropping the reference taken by btrfs_get_fs_root(), leaking a
reference to the root every time path resolution fails while printing
scrub warnings. Every other error and success path of the function
drops the reference.
Drop the reference on the paths_from_inode() failure path too.10hCVE-2026-463476.8 MED—
———The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. Prior to version 26.05, when a password reset link is visited, the application generates a replacement password in a predictable way and emails it to the account holder. The insufficient entropy allows the password to be brute-forced by an attacker who can approximate the server-side generation time. Exploiting this finding in isolation requires the victim to have triggered the reset themselves and the attacker to infer the server time from network or email metadata. This issue has been patched in version 26.05.7hCVE-2026-465315.5 MED—
———Cacti is an open source performance and fault management framework. From version 1.2.27 to before version 1.2.31, Cacti contains an authenticated stored second-order SQL injection in the automation tree rule item handler. A user holding the Automation realm (default General Administration role) can persist an arbitrary SQL fragment in the automation_tree_rule_items.field column. The fragment is later concatenated directly into a SELECT ... AS source FROM ... clause in lib/api_automation.php :: create_all_header_nodes() and executed when an administrator triggers automation via the standard graphs.php?action=actions&drp_action=8 ("Apply Automation Rules") bulk action. The result of the injected SELECT is written into graph_tree_items.title and rendered in the Cacti tree UI, providing a direct exfiltration channe. This issue has been patched in version 1.2.31.8h