CVE Watch402,410 in full archive

Vulnerabilities exploitable today

402,410in current view

Single score combining CVSS, KEV membership and EPSS. Every CVE with its own record — timeline from publication to active exploitation.

In KEV catalog1,754

New KEV · 24H0

Exploit Today ≥ 701,668

Distribution · last window

Critical
3,545
High
15,906
Medium
14,814
Low
1,453

Filters

Window

Severity

Flags

Vulnerabilities402,361–402,400 · 402,410

CVECVSSEPSSKEVRExploitTitleMod.

CVE-2026-98988—

—

———In the Linux kernel, the following vulnerability has been resolved: namespace: keep covered mounts covered in OPEN_TREE_NAMESPACE open_tree(OPEN_TREE_NAMESPACE) creates a new mount namespace from a copy of the tree at the given path. The caller needs to be privileged over its current user namespace because the new mount namespace will be owned by it. It doesn't need to be privileged over the mount namespace the tree is copied from. An unprivileged user just needs to create a user namespace first. The copy follows the rules of a detached bind mount. Without AT_RECURSIVE only the mount itself is cloned and its children are left out. With AT_RECURSIVE unbindable mounts are skipped. Both is fine when the caller has privileges over the source mount namespace because it could unmount those mounts anyway. Not so for an unprivileged user in that mount namespace. For them a mount namespace copy is what unshare() does. copy_mnt_ns() copies everything including unbindable mounts and lock_mnt_tree() makes sure nothing can be unmounted in the copy. Nothing that was covered gets revealed. create_new_namespace() only does the locking and so the covered content is right there in the new mount namespace: # mount -t tmpfs none /tmp/otn; mkdir /tmp/otn/covered # echo hidden > /tmp/otn/covered/under.txt # mount -t tmpfs none /tmp/otn/covered uid 1000, after unshare(CLONE_NEWUSER): fd = open_tree(AT_FDCWD, "/tmp/otn", OPEN_TREE_NAMESPACE); setns(fd, CLONE_NEWNS); open("/covered/under.txt", O_RDONLY) -> "hidden" Covering paths with mounts is how container runtimes mask parts of /proc and /sys and how admins hide things. When the caller's user namespace doesn't own the source mount namespace copy the way unshare() does and refuse a non-recursive copy of a mount that has anything mounted below the requested directory and copy unbindable mounts in a recursive copy. A caller that is privileged over the source mount namespace sees no change.8h CVE-2026-98987—

—

———In the Linux kernel, the following vulnerability has been resolved: namespace: look at the topmost mount for a mount namespace file attach_recursive_mnt() preallocates a mountpoint for the root of the topmost mount of the source so that a mount that already sits at the destination can be put on top of the source or on top of one of its propagated copies. The copies are made without CL_COPY_MNT_NS_FILE so their chain of overmounts is shorter than the source's. It ends below the first bind mount of a mount namespace file. So while the loop walks up the chain of the source it remembers the mountpoint of that mount in "shorter" and the existing mount is put there for the copies. But the loop ends at the topmost mount without ever looking at it. If the topmost mount is the only mount namespace file in the chain "shorter" stays NULL and mnt_change_mountpoint() attaches the existing mount of the copy below the root of the mount namespace file. That's a dentry of nsfs. No path walk in the copy's mount namespace ever gets there. The mount is gone until its parent goes and the copy that took its place can't be unmounted synchronously because it has a child: S bind mount of a file N bind mount of a mount namespace file on top of S A shared mount, B a slave of A, Q mounted on B/file move_mount(S, A/file) cat B/file -> the content of S instead of Q umount B/file -> EBUSY Look at every mount of the chain including the topmost one.8h CVE-2026-98986—

—

———In the Linux kernel, the following vulnerability has been resolved: namespace: remove the fsnotify marks of a mount namespace in process context mnt_ns_release() drops the last passive reference of a mount namespace and removes its fanotify marks via fsnotify_mntns_delete(). That takes the mutex of every group with a mark on the namespace and the spinlock of the connector. Fine from process context. But mnt_ns_tree_remove() hands the reference the namespace was allocated with to call_rcu() and so the marks are removed from the RCU softirq: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:623 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 0, name: swapper/3 __mutex_lock+0x113/0x24b0 fsnotify_destroy_marks+0x11b/0x3d0 mnt_ns_release_rcu+0x57/0xa0 rcu_core+0x6b6/0x1e40 and lockdep complains about the connector lock being taken from softirq context. A fanotify group with a FAN_MARK_MNTNS mark on the mount namespace of another task is all that's needed. Root in a user namespace can do that for a mount namespace it owns. The task exits and the namespace is freed with the mark still on it. Remove the marks in free_mnt_ns() before the namespace is handed to RCU. That runs in process context once the last active reference is gone. A mark is added through a file descriptor to the namespace which holds an active reference so no mark can show up after that.8h CVE-2026-98985—

—

———In the Linux kernel, the following vulnerability has been resolved: namespace: check the mounts before reading their parents in pivot_root() path_pivot_root() reads the parents of new_root and of the caller's root and checks whether they are shared before it checks that either mount is in the caller's mount namespace. Only namespace_sem is held. That's fine for a mount that is in the caller's mount namespace. But new_root can be a file descriptor to a mount that has been unmounted and that only the file descriptor keeps alive. If that mount stayed attached to its parent when it was unmounted nothing pins the parent for it. The final mntput() of the parent unhooks the children under mount_lock alone and frees the parent afterwards: pivot_root() close(fd), last ref on the parent ------------ --------------------------------- ex_parent = new_mnt->mnt_parent mntput_no_expire_slowpath() __umount_mnt(new_mnt) cleanup_mnt() call_rcu() IS_MNT_SHARED(ex_parent) BUG: KASAN: slab-use-after-free in path_pivot_root+0xf1a/0x1840 Read of size 4 at addr ffff8881047382f8 by task pivot_widen/157 path_pivot_root+0xf1a/0x1840 __x64_sys_pivot_root+0x165/0x190 The same goes for the caller's root via chroot(). Both outcomes of the check end in EINVAL so nothing but the read itself goes wrong. It's the same thing commit bb4609405752 ("statmount: read the parent of an unmounted mount under mount_lock") fixed for statmount(). Check that both mounts are in the caller's namespace before their parents are read. Every path returns EINVAL either way.8h CVE-2026-98984—

—

———In the Linux kernel, the following vulnerability has been resolved: dcache: don't put a mountpoint on a dentry that's being removed rmdir(), unlink() and rename() call dont_mount() on the victim and then detach_mounts() with the victim's inode locked. do_lock_mount() takes the inode lock of the mountpoint and checks cant_mount() so a mount can't show up after detach_mounts(). But attach_recursive_mnt() makes a second mountpoint for the root of the source mount so that the mounts already located at the destination can be put on top of it. No inode is locked for that one and d_set_mounted() only refuses a dentry that is unlinked. Between detach_mounts() and d_delete() the victim is still hashed: rmrace: b passed dont_mount() and detach_mounts(), sleeping T2: move_mount(S, /tmp/plcant/x, BENEATH) = 0 errno 0 () T1: rmdir(/tmp/plcant/d/b) = 0 errno 0 109 107 0:61 /d/b//deleted /tmp/plcant/x rw,relatime - tmpfs tmpfs rw 108 109 0:63 / /tmp/plcant/x rw,relatime - tmpfs T rw A bind mount of the directory that's being removed is moved beneath an existing mount while the rmdir() is located between the two calls. The mount ends up on the removed directory and nothing will ever detach it. Check cant_mount() in d_set_mounted() as well. dont_mount() raises the flag under d_lock before detach_mounts() runs so either the mountpoint is set first and detach_mounts() finds the mount or the flag is seen and the mount is refused.8h CVE-2026-98983—

—

———In the Linux kernel, the following vulnerability has been resolved: unshare: don't drop active namespace references that were never taken Active references on the namespaces of an nsproxy are taken when the nsproxy is installed into a task in switch_task_namespaces() and copy_namespaces() and dropped again by put_nsproxy() through deactivate_nsproxy(). But ksys_unshare() calls put_nsproxy() on an nsproxy that was never installed when set_cred_ucounts() fails. The new namespaces of that nsproxy go from zero to minus one and the namespaces shared with the caller lose a reference that belongs to the nsproxy the caller keeps using: WARNING: kernel/nscommon.c:171 at __ns_ref_active_put+0x1cd/0x230 nsproxy_ns_active_put deactivate_nsproxy ksys_unshare Afterwards the namespaces the caller lives in aren't listed by listns() anymore. set_cred_ucounts() only fails when alloc_ucounts() can't allocate and it only allocates when the real uid of the caller differs from its effective uid. Commit cefd55bd2159 ("nsproxy: fix free_nsproxy() and simplify create_new_namespaces()") separated the two cases on purpose. nsproxy_free() frees an nsproxy that was prepared but never installed and that's what a failed setns() uses in put_nsset(). Export it and use it for a failed unshare() as well.8h CVE-2026-98982—

—

———In the Linux kernel, the following vulnerability has been resolved: namespace: don't let a pseudo dentry become the root of a mount d_alloc_pseudo() hands out dentries for pipes, sockets and other files that are never anyone's child or parent. They carry DCACHE_NORCU and dentry_free() frees them right away because no lockless path walk can ever reach them. That holds as long as such a dentry isn't the root of a mount. But bind mounting /proc/self/fd/<fd> of such a file does exactly that. Most callers of alloc_file_pseudo() put their files on kernel-internal mounts and may_copy_tree() refuses those. bpf_token_create() doesn't. It places the token file on the bpffs mount the caller handed it and that mount is in the caller's mount namespace so the clone goes through: mount --bind /proc/self/fd/<token> <file> open_tree(tokfd, "", AT_EMPTY_PATH | OPEN_TREE_CLONE) + move_mount() __follow_mount_rcu() then loads ->mnt_root of that mount, reads d_seq and d_flags of the dentry and only then checks mount_lock. The dentry can be gone by then. The final mntput() of an unmounted parent unhooks a child that stayed attached to it under mount_lock alone. When the child's holder does the final put right after that the root is dput() and freed immediately while a walker that found the mount hashed still looks at it. Refuse to clone a mount with a DCACHE_NORCU dentry as its root. Nothing sensible can be done with a bind mount of a bpf token anyway.8h CVE-2026-98981—

—

———In the Linux kernel, the following vulnerability has been resolved: namespace: unhash a dentry before detaching the mounts on it unlink(), rmdir() and rename() remove the entry from the filesystem, call detach_mounts() on the entry with the inode locked and then call d_delete() once the inode is unlocked. The thing is that between detach_mounts() and d_delete() the dentry is still hashed and positive. But after detach_mounts() nothing covers the dentry anymore. A lookup that finds this dentry in the dcache can uncover what the mounts hid. That's a problem when unlinking files or directories that are mountpoints in other mount namespaces. Everybody who had the underlying entry covered can race the detach_mount() call until d_delete() has run. The race window isn't all that small. It encompasses namespace_unlock() with a full synchronize_rcu_expedited() grace period and the inode_unlock() of the entry. In my experiments three walkers that kept trying read an overmounted file in 11938 of the 16140 unlinks that removed its mountpoint from a bind mount of the filesystem within a minute. Fun fact, d_invalidate() has the same ordering problem but gets it right. It unhashes the dentry first and detaches the mounts afterwards. Let's do the same in __detach_mounts(): - A lookup that hasn't found the dentry yet misses it in the dcache and waits for the directory lock that the caller holds until the name is gone for good. - A lockless lookup that found it already fails the mount_lock check while the dentry still counts as a mountpoint and the d_seq check once it doesn't, and retries. This fixes the lockless path. We still need to fix the reference count lookup in a follow-up patch. So d_drop() the dentry. The dentry stays positive and held but can't be found anymore. Then proceed with the detach and unlink. Reproducer: The reads were counted with the program below, three walkers for 60 s in a VM with 4 CPUs. The race window is stretched with the debug patch pasted here. fs.detach_race_walk_us sleeps in lookup_fast() once it found a mountpoint dentry and before its mounts are crossed. fs.detach_race_unlink_us sleeps in vfs_unlink() between detach_mounts() and d_delete(). // SPDX-License-Identifier: GPL-2.0 /* * unlink_covered: unlink a file that is a mountpoint in a detached copy of * its mount, against lookups that open it through that copy. * * A is a tmpfs with the file f1 (content SECRET_F) and the plain file * MARK_A. A' is an open_tree(OPEN_TREE_CLONE) copy of A with MARK_A bound * on A'/f1, held through an O_PATH fd on its root once the tree fd is * closed. Walkers open f1 through that fd while the driver unlinks A/f1, * where nothing is mounted on it. A walker may read MARK_A or get ENOENT. * A read of SECRET_F is a hit: the name was found after its mount was * gone. The lockless walks use openat2(RESOLVE_CACHED). * * usage: unlink_covered [-t seconds] [-w walkers] */ #ifndef _GNU_SOURCE #define _GNU_SOURCE #endif #include <errno.h> #include <fcntl.h> #include <pthread.h> #include <stdatomic.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <unistd.h> #include <sys/mount.h> #include <sys/stat.h> #include <sys/syscall.h> #include <linux/openat2.h> #ifndef __NR_open_tree #define __NR_open_tree 428 #endif #ifndef __NR_move_mount #define __NR_move_mount 429 #endif #ifndef __NR_openat2 #define __NR_openat2 437 #endif #ifndef OPEN_TREE_CLONE #define OPEN_TREE_CLONE 1 #endif #ifndef OPEN_TREE_CLOEXEC #define OPEN_TREE_CLOEXEC O_CLOEXEC #endif #ifndef MOVE_MOUNT_F_EMPTY_PATH #define MOVE_MOUNT_F_EMPTY_PATH 0x00000004 #endif #define WORK "/tmp/uc" #define ADIR WORK "/A" static int duration = 60, nwalkers = 3; static atomic_int stop, writer_waiting; static pthread_rwlock_t cur_lock = PTHREAD_RWLOCK_INITIALIZER; static int cur_fd = -1; /* the root of A', -1 wh ---truncated---8h CVE-2026-98980—

—

———In the Linux kernel, the following vulnerability has been resolved: namei: don't reveal overmounted entries in refwalk In rcuwalk the dentry is validated before it is accepted. step_into() step_into() rechecks d_seq and __follow_mount_rcu() rechecks mount_lock. An entry that gets unlinked in between causes the lookup to retry and miss. A refwalk doesn't do this. lookup_fast() takes a reference on the hashed dentry and simply accepts it. So an unlink that happens after the reference was taken isn't seen by refwalk. That's fine for a simple file. We just happened to open it before it was unlinked, no problem. For a mountpoint and specifically a locked mountpoint it very much isn't. The unlink detaches all mounts and then removes the name. Any refwalk that hasn't traversed the mounts yet simply reveals the underlying entry. It's a very narrow window but it can be hit: reads of a covered file in 60 s, 3 walkers, ~15000 unlinks no widening 27 that step + 200 us 3741 See the appended patch for a more reliable reproducer. So check the entry after step_into(). unlink(), rmdir() and rename() mark the dentry with dont_mount() before they detach the mounts and remove the dentry. So a dentry that is marked with DCACHE_CANT_MOUNT and is unhashed by the time its mounts were looked at is a name that was unlinked under the refwalk. DCACHE_CANT_MOUNT is read after the mounts were looked up and it is set before they are detached by detach_mounts(). A refwalk that missed the mounts will see DCACHE_CANT_MOUNT. Plain d_unlinked() is fine. A rename takes the dentry off its hash chain but ___d_drop() leaves d_hash.pprev set. So only __d_drop() and a rename over the dentry unhash it. The only move that flips IS_ROOT splices in a disconnected alias. That doesn't have DCACHE_CANT_MOUNT set. Add the to step_into_slowpath(). ".." and LOOKUP_DOWN may legitimately land on an unhashed directory. A refwalk that crossed onto a mount has path.mnt different from nd->path.mnt. A dentry that a filesystem dropped on its own (d_invalidate(), d_drop()) doesn't have the flag set and is treated as before. // SPDX-License-Identifier: GPL-2.0 /* * unlink_covered: unlink a file that is a mountpoint in a detached copy of * its mount, against walkers that open it through that copy. * * A is a tmpfs with the file f1 (content SECRET_F) and the plain file * MARK_A. A' is an open_tree(OPEN_TREE_CLONE) copy of A with MARK_A bound * on A'/f1, held through an O_PATH fd on its root once the tree fd is * closed. Walkers open f1 through that fd while the driver unlinks A/f1, * where nothing is mounted on it. A walker may read MARK_A or get ENOENT. * A read of SECRET_F is a hit: the name was found after its mount was * gone. The lockless walks use openat2(RESOLVE_CACHED). * * usage: unlink_covered [-t seconds] [-w walkers] */ #ifndef _GNU_SOURCE #define _GNU_SOURCE #endif #include <errno.h> #include <fcntl.h> #include <pthread.h> #include <stdatomic.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <unistd.h> #include <sys/mount.h> #include <sys/stat.h> #include <sys/syscall.h> #include <linux/openat2.h> #ifndef __NR_open_tree #define __NR_open_tree 428 #endif #ifndef __NR_move_mount #define __NR_move_mount 429 #endif #ifndef __NR_openat2 #define __NR_openat2 437 #endif #ifndef OPEN_TREE_CLONE #define OPEN_TREE_CLONE 1 #endif #ifndef OPEN_TREE_CLOEXEC #define OPEN_TREE_CLOEXEC O_CLOEXEC #endif #ifndef MOVE_MOUNT_F_EMPTY_PATH #define MOVE_MOUNT_F_EMPTY_PATH 0x00000004 #endif #define WORK "/tmp/uc" #define ADIR WORK "/A" static int duration = 60, nwalkers = 3; static atomic_int stop, writer_waiting; static pthread_rwlock_t cur_lock = PTHREAD_RWLOCK_INITIALIZER; static int cur_fd = -1; /* the root of A', -1 while there is none */ static atomic_long n_unlink, n_walk, n_mark, n_enoent, n_othe ---truncated---8h CVE-2026-98943—

—

———In the Linux kernel, the following vulnerability has been resolved: HID: steam: Clean up locking This cleans up several issues with locking behavior, including RCU accesses not being guarded behind a lock.8h CVE-2026-98979—

—

———In the Linux kernel, the following vulnerability has been resolved: namespace: refuse an automount below a mount that is in no namespace It's possible to add autmounts even when the parent mount isn't in the mount namespace of the caller. The only requirement we have is that the parent mount namespace must not be NULL, i.e., unmounted. Problem is that clone_private_mount() has MNT_NS_INTERNAL which makes that trivially true. So that passes the test and attach_recursive_mnt() accepts that as a mount point and funny enough, count_mounts() dereferences MNT_NS_INTERNAL. The problem is it is an error pointer... So we can reach this in userspace via fanotify. A filesystem mark on the lower filesystem of an overlay reports paths on the layer clone and reading the event hands out a descriptor on it. For example with debugfs as the lower layer it goes kaboom: openat(evfd, "tracing", O_DIRECTORY) Oops: general protection fault KASAN: null-ptr-deref in range [0x1d0-0x1d7] RIP: 0010:count_mounts+0x35/0x200 attach_recursive_mnt finish_automount And since that sleeping beauty happens under namespace_sem held for writing every mount operation on the system blocks from then on. Congrats. Use is_mounted() instead which rejects unmounted and internal mounts alike. The open fails with EINVAL just as it did before clone_private_mount() used MNT_NS_INTERNAL.8h CVE-2026-98978—

—

———In the Linux kernel, the following vulnerability has been resolved: namespace: never expire a locked mount Locked mounts are special. They protect the underlying files and directories from being revealed. do_umount() refuses to unmount locked mounts but shrink_submounts() doesn't. A shrinkable mount can become locked once the owner of a user namespace puts it beneath a locked mount with MOVE_MOUNT_BENEATH. The locked property now moves to the mount at the bottom making it possible to unmount the top mount. So umount() of an unlocked ancestor now expires the bottom mount first and the covered directory is revealed: move_mount(c -> x/hidden, MOVE_MOUNT_BENEATH) = 0 the cover after the lock moved: umount2(x/hidden) = 0 the holder of the lock: umount2(x/hidden) = EINVAL the root of the copy, busy: umount2(x) = EBUSY reads x/hidden/secret: "covered-by-root" So leave a locked mount alone as it dies together with its parent. A plain umount() of an unlocked mount with a locked one below it is EBUSY from now on. It's the same for any other locked child. A lazy umount still takes the whole tree. mark_mounts_for_expiry() never sees a locked mount. lock_mnt_tree() leaves a mount on an expiry list alone and nothing else puts a locked one on such a list. Add an assert for this.8h CVE-2026-98977—

—

———In the Linux kernel, the following vulnerability has been resolved: namespace: handle mount locking for automounts correctly If mounts are propagated across user namespaces, attach_recursive_mnt() locks every copy of the source mount to protect overmounts from vanishing and revealing the underlying files or directories. The user namespace is taken from the caller's mount namespaces since this is where the mounts end up. Except, that's not always true. Automounts may legitimately get popped in by tasks located in a different mount and user namespace during path lookup. Then check doesn't make sense at that point. The copy in the namespace of the parent - which may be the host's - is now locked and the host cannot change the flags of its own mounts anymore. Here's the reproducer: - host has debugfs mounted nosuid,nodev,noexec and shared - tracefs automount below it is not yet active - hand a child process a directory descriptor on that mount - child process enters auser and mount namespace - child process' namespace now holds a locked copy of the host's debugfs mount that receives propagation from it - child process stats "tracing/." through the descriptor - lookup runs on the host's mount so the automount lands below the host's mount - propagation puts a copy below the child's copy - both try to clear the flags on the mount they got, with a bind remount: host, on its own automount: MS_REMOUNT|MS_BIND = EPERM child, on the copy in its namespace: MS_REMOUNT|MS_BIND = 0 So the lock landed on the host's mount instead of the child's copy. Congrats. So we need to compare with the owner of the namespace the mount actually gets mounted on. For all regular cases that is the caller's mount namespace and so nothing changes. Detached trees in anonymous mount namespaces by be handed over via SCM_RIGHTS or inherited in other ways on purpose so the attaching task's mount namespace is authoritative, not the creator of the detached tree.8h CVE-2026-98976—

—

———In the Linux kernel, the following vulnerability has been resolved: namespace: keep the lock on a mount that a propagated copy is moved beneath attach_recursive_mnt() transfers MNT_LOCKED from the top mount to the mount that is moved beneath it with MOVE_MOUNT_BENEATH. This allows the owner of a user namespace to replace its locked /proc or its root. The mount beneath takes on the job of covering the underlying mountpoint allowing the top mount to be unmounted. Consider two mount namespaces: (H) The host H has a shared mount P with a secret in P/d (Z) Z is a user namespace made from M. Its copy of P receives propagation from the host's P and its copy of M's cover on P/d is locked Z's owner must not get to see P/d. Now (H) mounts X on P/d. This propagates into (Z). The copy of X lands beneath (Z)'s locked cover. The locked property is transfered from (Z)'s cover to the copy of X propagated beneath it. The cover is now unlocked. Now (H) unmounts X again. The copy of X in (Z) gets unmounted and the covering mount is left unlocked on top of P/d. (Z) can now unmount it: Z: umount2(P/d) = EINVAL /* the cover is locked */ H: mount X on P/d, umount X /* both propagate into Z /* Z: umount2(P/d) = 0 /* the cover is now unlocked */ Z: read P/d/secret = "covered-by-root" /* secret revealed */ So only transfer the locked property to the mount beneath for mounts the caller has placed. A propagated copy that lands beneath a locked mount is locked as well so that the mount at the bottom of the stack carries a lock the way every check expects. The mount on top of it remains locked to ensure that it keeps covering even if the propagated mount is unmounted again.8h CVE-2026-98975—

—

———In the Linux kernel, the following vulnerability has been resolved: xfs: stop exchanging reflink flags when exchanging mappings When an exchange covers both files from offset 0 to i_disk_size, xmi_can_exchange_reflink_flags() assumes every mapping moved and hands the reflink flag over to the other file. That assumption is wrong. A file can still own shared blocks past i_disk_size, e.g. after EXCHANGE_RANGE_TO_EOF sets a smaller size without unmapping anything. The flag is cleared anyway, and the next write to such a block happens in place instead of CoW, corrupting the other file that shares it. Commit a23eca88448e ("xfs: fix exchange-range reflink flag clearing issue with INO1_WRITTEN") fixed one instance of this. Rather than add another special case, stop moving the flags. xfs_exchmaps_ensure_reflink() already sets the flag on both inodes before the exchange, so both just keep it. Nothing sets CLEAR_INO{1,2}_REFLINK anymore. Intents logged by older kernels may still carry them; recovery already masks them off, so they stay in the log format mask and are ignored. XFS_IOC_SWAPEXT has the same problem: it moves the reflink flag from one inode to the other along with the extents. Just removing that is not enough here: the exchange path flags both inodes up front in xfs_exchmaps_ensure_reflink(), but swapext has no such step, so the inode receiving the shared extents would be left without the flag. Set it on both inodes instead, and make sure both have a CoW fork, since an inode with the reflink flag is expected to have one. The flag now stays until FALLOC_FL_UNSHARE_RANGE, xfs_scrub, or a truncate to zero removes it.8h CVE-2026-98974—

—

———In the Linux kernel, the following vulnerability has been resolved: xfs: fix exchange-range-to-eof file size exchange Norbert Szetei posted a patch containing an incomplete description of a bug in XFS_IOC_EXCHANGE_RANGE's TO_EOF flag. The bug tricks exchange-range into modifying a file so that it has shared blocks starting beyond EOF, which is never allowed because files never have written data beyond EOF, and you can only share written data blocks. This is key to all the incorrect behavior that follows. Eventually I got from Norbert a description of what's going wrong: > Fair. Here it is with physical block numbers, 4k blocks. peer is the file > that gets rewritten and file1 is the one that ends up with the flag > cleared. > > Start, nothing shared: > > peer size 4096 -> [100] > file1 size 12288 -> [200] [201] [202] > donor1 size 4096 -> [300] > donor2 size 4096 -> [400] > > 1. FICLONERANGE peer's block into file1's middle slot: > > peer size 4096 -> [100] > file1 size 12288 -> [200] [100] [202] reflink flag set > ^^^^^ both files own block 100 > > 2. XFS_IOC_EXCHANGE_RANGE file1 against donor1, file1_offset 0, > file2_offset 8192, length 0, TO_EOF. One block is exchanged, and the sizes > are exchanged with it: > > file1 size 4096 -> [200] [100] [300] reflink flag set > ^^^^^^^^^^^ still owned, now past the size > donor1 size 12288 -> [202] > > file1 says it is one block long while it still owns three. Nothing was > unmapped. file2_offset is block 2, so this exchange cannot clear a flag. > > 3. XFS_IOC_EXCHANGE_RANGE file1 against donor2, both offsets 0, length 4096. > By i_disk_size this is two one-block files exchanging everything, so > xmi_can_exchange_reflink_flags() agrees and the flag is cleared: > > file1 size 4096 -> [400] [100] [300] reflink flag CLEARED > donor2 size 4096 -> [200] > > Block 100 is still shared with peer. > > 4. pwrite(file1, 4096, 4096), which is file1's second slot, block 100. > xfs_is_cow_inode(file1) is false, so no CoW: > > peer size 4096 -> [100] same block, new contents > > Block 100 is the only one that matters here. PoC below, it reads a file > called peer in the current directory. The filesystem needs reflink and > exchange-range, which mkfs.xfs 7.x turns on by default. So yes, TO_EOF is screwing up the file size even if it's actually exchanging the data block correctly. The following is the intended behavior of XFS_EXCHANGE_RANGE_TO_EOF, as described by its manpage: "Ignore the length parameter. All bytes in file1_fd from file1_offset to EOF are moved to file2_fd, and file2's size is set to (file2_offset+(file1_length-file1_offset)). Meanwhile, all bytes in file2 from file2_offset to EOF are moved to file1 and file1's size is set to (file1_offset+(file2_length-file2_offset))." In other words, if we only exchange a portion of the file data, then we should only exchange the portion of the file size that relates to the exchanged data. Unfortunately, the code swaps the ondisk file size and the incore file sizes, which is incorrect if the caller passes in a nonzero offset. Having confused the file sizes, the PoC uses a second exchange-range call on what looks like a non-reflinked single-block file. Because the file size is set incorrectly, exchange-range thinks it's exchanging the full contents of two files and clears the reflink flag on the broken file. That enables an extending write of the broken file to rewrite the shared block that's just past EOF. This has become known colloquially as refluxfs. Once the file sizes are set correctly, the second exchange-range no longer thinks that it's doing a full-contents swap, so it won't clear the reflink flag on either of its file arguments. Norbert followed up to an earlier version of this patch with a second complaint about us not handling the i_disk_size state correctly: > The offsets are bounded against the incore i_size but subtracted from > ---truncated---8h CVE-2026-98973—

—

———In the Linux kernel, the following vulnerability has been resolved: drm/bridge: Fix unlocked list_del in drm_bridge_add() When re-adding a bridge that was previously removed, drm_bridge_add() drops it from bridge_lingering_list without holding bridge_lock. Both bridge_list and bridge_lingering_list are protected by bridge_lock, as they are concurrently modified by drm_bridge_remove() and __drm_bridge_free(), and walked by the debugfs 'bridges' file. Running the list_empty() test and the list_del_init() outside of the lock may therefore corrupt either list. Perform both under bridge_lock.8h CVE-2026-98972—

—

———In the Linux kernel, the following vulnerability has been resolved: cgroup/cpuset: Don't access cpuset_cgrp_subsys.root in is_in_v2_mode() After seeing the patch [1] to guard is_in_v2_mode() with RCU, it makes me realize that is_in_v2_mode() may be called in a context where a new cgroup filesystem is being rebound with stale cpuset_cgrp_subsys.root pointer. Avoid this potential UaF situation by adding a new cpuset_v2_mode flag which is set when the cpuset_v2_mode mount option is used. This flag is written into only when cpuset_bind() is being called with a stable cpuset_cgrp_subsys.root value. The is_in_v2_mode() helper is modified to read the new cpuset_v2_mode flag instead of accessing cpuset_cgrp_subsys.root directly. [1] https://lore.kernel.org/lkml/20260929084124.626693-2-arighi@nvidia.com8h CVE-2026-98971—

—

———In the Linux kernel, the following vulnerability has been resolved: gpio: exar: initialize the ID before registering its cleanup devm_add_action_or_reset() invokes the cleanup action immediately when registering the action fails. gpio_exar_probe() currently stores the allocated ID in exar_gpio only after registering the action, so that failure makes exar_devm_ida_free() release ID 0. If the allocated ID is nonzero, this leaks that ID and can free ID 0 belonging to another device. Store the ID before registering the cleanup action so both the immediate failure path and normal device teardown release the correct allocation.8h CVE-2026-98970—

—

———In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Free the BO cache size list on teardown vc4_bo_cache_destroy() purges the cached BOs but never frees the size list, leaking it on every unbind.8h CVE-2026-107685—

—

———Improper Certificate Validation vulnerability in the WebSocket streaming client in agentjido req_llm allows an on-path attacker to read and modify OpenAI WebSocket sessions, including the authorization bearer token, via a TLS certificate the client does not trust. ReqLLM.Streaming.WebSocketSession.Client.start/3 in lib/req_llm/streaming/web_socket_session/client.ex starts WebSockex without TLS options, and WebSockex defaults to insecure: true, which connects with verify: :verify_none. The option allowlist also drops any caller-supplied cacerts or ssl_options, so an application cannot turn verification on. The OpenAI Responses, Realtime, and Codex WebSocket paths reach this client and send the API key or OAuth access token in the authorization header. HTTP streaming through Finch and the HTTP/2 duplex session through Mint verify certificates and are not affected. This issue affects req_llm: from 1.9.0 before 1.29.0.9h CVE-2026-1119654.3 MED

—

———The Profile Builder WordPress plugin from 4.0.0 to 4.0.4 does not enforce its reCAPTCHA verification on all comment submission paths, allowing authenticated users to bypass the anti-spam protection an administrator configured for the WordPress comment form.7h CVE-2026-1129048.7 HIG

—

———Vvveb is a powerful and easy to use CMS with page builder to build websites, blogs or ecommerce stores. In versions 1.0.8.6 and prior, the nextRestore() and nextBackup() functions in the backup controller accept a file GET parameter and concatenate it directly to DIR_BACKUP without calling sanitizeFileName(). This allows an authenticated administrator to read arbitrary files on the server (via nextRestore) and write SQL dump content to arbitrary locations (via nextBackup). This is inconsistent with the sibling functions restore(), delete(), and download() which all correctly call sanitizeFileName() first. This issue has been patched via commit aa29cb0.9h CVE-2026-1157226.1 MED

—

———RPly through 1.1.4 contains an improper array index validation vulnerability in ply_read_header_property() that accepts list as a list property's length or value type. Attackers can supply a crafted PLY file that makes ply_read_list_property() call an out-of-bounds handler, crashing ASCII parsing or corrupting memory in binary parsing.9h CVE-2026-1157237.4 HIG

—

———Snap7 through 1.4.3 contains an out-of-bounds write vulnerability in the passive partner that allows a malicious active partner to overflow application buffers by declaring an unvalidated BSend total length. Attackers connecting from the configured peer address can declare up to 65535 bytes and send a short fragment, causing BRecv to memcpy past the buffer and crash or corrupt SCADA, HMI or gateway processes.6h CVE-2026-1157242.9 LOW

—

———VLC for Android before 3.7.2 contains a confused-deputy file overwrite vulnerability in FileUtils.getUri() that trusts content URIs based only on the com.fsck.k9.attachmentprovider or gmail-ls authority. A co-installed app without permissions can declare these authorities and send a crafted VIEW intent to the exported StartActivity, making VLC write attacker-chosen content under an attacker-chosen name in the shared Download directory, overwriting other apps' files when VLC holds All files access.9h CVE-2026-1157254.2 MED

—

———Chatwoot before 4.17.0 contains an authorization bypass vulnerability that allows authenticated agent bots to access other accounts by supplying a foreign contact inbox source_id. Attackers can call the conversations create endpoint with another account's source_id to create or retrieve conversations and post messages to that account's contacts.9h CVE-2026-98969—

—

———In the Linux kernel, the following vulnerability has been resolved: net/sched: em_text: reject unterminated algo before autoload This is a follow-up to commit 9c572a83037a ("net/sched: fix potential stack infoleak in em_text_dump()"), which zero-initialised the dump-side struct. Sashiko pointed at a pre-existing bug that exposed the change-side input-validation gap open. em_text_change() casts the raw netlink attribute payload to struct tcf_em_text and passes conf->algo, a 16-byte array with no enforced NUL terminator, to textsearch_prepare(). On the TS_AUTOLOAD retry textsearch_prepare() calls request_module("ts_%s", algo); vsnprintf() walks %s until it finds a NUL, so an algo[] with no NUL reads past the array into the adjacent struct fields and payload and feeds those bytes to the usermode helper command line. This is an out-of-bounds read and a kernel memory disclosure. Reject the attribute when no NUL exists within TC_EM_TEXT_ALGOSIZ bytes, matching the check xt_string has had since 3ab720881b6e. Conditions to recreate the bug: - CAP_NET_ADMIN on the target netns (namespace-local via unshare -Urn is enough) - install clsact on an interface, then add a basic filter with one text ematch whose algo[] is 16 bytes with no NUL (e.g. "A"*16) and pattern_len at least 1 - the add fails with -ENOENT and the kernel invokes modprobe with a module name made of "ts_" plus the 16 bytes and the adjacent payload8h CVE-2026-98968—

—

———In the Linux kernel, the following vulnerability has been resolved: amt: send the relay's General Query directly from the receive path An skb queued in a qdisc can outlive the tunnel it references through a raw pointer in skb->cb. For example, with igmp_qrv set to 1 on the relay a tunnel lives for 135s, so a netem delay of 180s on the amt device outlives it; when the tunnel expires and is freed, the subsequent dequeue triggers a use-after-free in amt_dev_xmit(). BUG: KASAN: slab-use-after-free in amt_dev_xmit+0x2763/0x2e20 Call Trace: amt_dev_xmit+0x2763/0x2e20 [drivers/net/amt.c:1262] dev_hard_start_xmit+0x22f/0x620 sch_direct_xmit+0x12e/0xac0 netem_dequeue+0x333/0xc50 net_tx_action+0x35c/0xa60 amt_send_igmp_gq() and amt_send_mld_gq() are only called from amt_request_handler(), inside the rcu_read_lock_bh() section of amt_rcv(). amt_request_handler() already has the tunnel the query is for: it found or created it inside that section. Queuing the query with dev_queue_xmit() only leads back into amt_dev_xmit(), which strips the Ethernet header and calls amt_send_membership_query() for that tunnel. Make that call directly from the two senders instead, the same way amt_send_advertisement() transmits from the receive path. The query never waits in a qdisc, the tunnel is only dereferenced inside the RCU section that found or created it, and nothing is stored in skb->cb, so no lookup or refcount is needed. Remove the query branch of amt_dev_xmit(), amt_skb_cb() and struct amt_skb_cb, which have no users left. Behaviour changes: - The relay's own General Queries no longer pass through the amt device's egress path: its qdisc, tc egress (clsact/tcx), the netfilter egress hook and packet taps. They are still visible as UDP on the underlay. - A query that is sent successfully is no longer counted as tx_dropped. The old query branch left through the unlock label, which counted every sent query as dropped. - A query that reaches amt_dev_xmit() on a relay from elsewhere, such as a userspace querier, is now dropped at the IGMP/MLD type switch. Before, it trusted whatever skb->cb held, and a NULL tunnel hit the WARN_ON(1).8h CVE-2026-1157267.8 HIG

—

———Aider through 0.86.2 contains a command execution vulnerability that allows attackers to run shell commands by committing a malicious .aider.conf.yml that is auto-loaded without a trust prompt. Attackers can set notifications-command or editor values that are executed via subprocess with shell=True after model replies or /editor use, running commands with the victim's privileges.9h CVE-2026-1157278.1 HIG

—

———AgenticSeek before commit 409840c contains a remote code execution vulnerability because llm_server/app.py hardcodes Flask debug mode while binding to all interfaces. Attackers who reach the server port and obtain the derivable Werkzeug debugger PIN can execute Python code and operating system commands with llm_server privileges.6h CVE-2026-568328.8 HIG

—

———PraisonAI is a multi-agent teams system. From version 4.5.2 to before version 4.6.59, praisonai.bots.DiscordApproval approves a pending dangerous tool call when it sees any later non-bot message in the configured Discord channel whose text is classified as approval, such as yes. As a result, any user who can post in the configured approval channel can approve a pending high-risk tool call by sending yes after the approval message appears. the same PoV also shows that the Slack and Telegram messaging approval backends have no explicit approver allowlist parameter, but the primary report-grade issue is the Discord backend's unthreaded channel cross-talk: the approving message does not need to be a reply or otherwise request-bound. This issue has been patched in version 4.6.59.9h CVE-2026-568337.5 HIG

—

———PraisonAI is a multi-agent teams system. From version 3.8.1 to before version 4.6.59, PraisonAI's Dynamic Context module provides filesystem-backed history and terminal-log storage. The module also exports agent-callable tool factories. Those tools accept run_id and agent_id arguments from the tool caller. The underlying stores join those values into filesystem paths without rejecting absolute paths or .. traversal. Because run_id can be an absolute path and agent_id can contain traversal, a lower-trust prompt/user that can call these tools can read .jsonl and .log files outside the configured Dynamic Context base directory. This issue has been patched in version 4.6.59.9h CVE-2026-568347.5 HIG

—

———PraisonAI is a multi-agent teams system. From version 3.8.1 to before version 4.6.59, PraisonAI's Dynamic Context Discovery feature exposes artifact helper tools through ctx.get_tools(). The implemented artifact tools do not enforce that the supplied artifact_path is an artifact created by the configured store or that it lives under the configured artifact base directory. Instead, artifact_head, artifact_tail, artifact_grep, and artifact_chunk wrap the caller-supplied path directly into an ArtifactRef and then read it from the host filesystem. As a result, any prompt/user/tool-caller that can influence those tool arguments can read files readable by the PraisonAI process, such as project .env files, cloud credentials, SSH keys, source files, or other local data. This issue has been patched in version 4.6.59.9h CVE-2026-568358.3 HIG

—

———PraisonAI is a multi-agent teams system. From version 3.11.0 to before version 4.6.59, PraisonAI's Slack bot applies its configured allowed_users, allowed_channels, and unknown-user pairing policy in the normal Slack message event handler, but not in the adjacent Slack app_mention event handler. A Slack workspace user who can mention the bot in a channel where the Slack app is present can trigger the configured PraisonAI agent even when: the sender is not in BotConfig.allowed_users; the channel is not in BotConfig.allowed_channels; unknown_user_policy="deny" is configured; and the same event content is correctly dropped by the normal message handler. This issue has been patched in version 4.6.59.9h CVE-2026-568368.2 HIG

—

———PraisonAI is a multi-agent teams system. From version 4.5.112 to before version 4.6.59, PraisonAI's installed console entrypoint is Typer-first. In current releases, the recipe command is registered in the Typer app and praisonai recipe serve dispatches to the deprecated Typer command in src/praisonai/praisonai/cli/commands/recipe.py. That Typer command can start the Recipe HTTP server on a non-localhost interface with no authentication. It prints a deprecation warning, and then launches the server. Because config.auth is absent, create_app() does not attach the API-key or JWT middleware. Unauthenticated requests can then reach the recipe API and, when enabled, /admin/reload. This issue has been patched in version 4.6.59.9h CVE-2026-568378.6 HIG

—

———PraisonAI is a multi-agent teams system. From version 4.6.56 to before version 4.6.59, PraisonAI's LinearBot starts a public webhook listener on 0.0.0.0 and treats LINEAR_WEBHOOK_SECRET as optional. When the secret is absent, startup only logs a warning and _handle_webhook() skips Linear-Signature verification entirely. An unauthenticated network caller who can reach the webhook endpoint can submit a forged Linear-Event: AgentSession request. The forged request is parsed, scheduled for background processing, dispatched to _handle_agent_session(), and passed into BotSessionManager.chat(). The bot then attempts to post the agent response back to Linear under the configured bot token. The PoV is offline and deterministic. It does not contact Linear. It calls the webhook handler directly, monkey-patches the outbound Linear comment path, and proves both sides of the boundary. This issue has been patched in version 4.6.59.9h CVE-2026-98967—

—

———In the Linux kernel, the following vulnerability has been resolved: cxgb4/ch_ktls: disable softirqs around tid_list erases chcr_ktls_cpl_act_open_rpl() inserts into tid_list from the receive path using xa_insert_bh(). The array is shared by the adapter's connections and initialized with XA_FLAGS_LOCK_BH. However, chcr_ktls_dev_del() and the chcr_ktls_dev_add() error path use xa_erase(), which takes the XArray lock without disabling softirqs. When cleanup runs with softirqs enabled, a receive softirq for another connection on the same CPU can interrupt the erase and spin on the lock held by the interrupted task. Use xa_erase_bh() at both sites to match the insertion path.8h CVE-2026-98966—

—

———In the Linux kernel, the following vulnerability has been resolved: bonding: fix the program leak when XDP is replaced We need to release the reference on the old BPF prog, whether we are going to no-prog, or replacing the prog with another. Spotted by AI while running tests for the propagation series (leaked programs were accumulating). Selftest will come in the net-next series to avoid conflicts.8h CVE-2026-98965—

—

———In the Linux kernel, the following vulnerability has been resolved: ice: Restore Ordered MMIO Writes for Tx Doorbells The DQL accounting state which tracks the number of bytes queued for the NIC to transmit, namely dql->num_queued, is updated by the ICE driver when it invokes __netdev_tx_sent_queue(). Subsequently the driver updates the hardware queue tail allowing the NIC to begin processing the work queue. The queue accounting update should be ordered before the NIC begins transmitting descriptors. The transmit path currently updates the hardware doorbell using writel_relaxed(), which (on arm64) does not provide the same ordering guarantees between writes to normal memory and writes to MMIO registers that writel() does. This introduces a potential race where the NIC begins transmitting descriptors before the dql->num_queued update is globally visible. If the NIC finishes before the update is observed by dql_completed(), it detects an invalid state where more bytes have been completed than have been queued. When this happens the following BUG_ON is triggered. BUG_ON(count > num_queued - dql->num_completed); This has been observed and manifests as the following crash (note that the trace has been trimmed) in an environment with sustained network load that uses an Intel Corporation Ethernet Controller E810-XXV for SFP (rev 02) on an arm64 machine. Replacing writel_relaxed() with writel() in a test kernel eliminated the crash in the user's workload, which previously reproduced the issue reliably. kernel BUG at lib/dynamic_queue_limits.c:99 Internal error: Oops - BUG: 00000000f2000800 [#1] SMP pc : dql_completed+0x268/0x2a0 lr : ice_clean_tx_irq+0x1d4/0x620 [ice] Call trace: dql_completed+0x268/0x2a0 (P) ice_napi_poll+0x94/0x520 [ice] __napi_poll+0x48/0x3f0 net_rx_action+0x194/0x420 This restores the behaviour prior to commit ccde82e90946 ("ice: add E830 Earliest TxTime First Offload support"), which changed the notification mechanism from writel() to writel_relaxed().8h