CVE Watch401,106 in full archive

Vulnerabilities exploitable today

16,596in current view

Single score combining CVSS, KEV membership and EPSS. Every CVE with its own record — timeline from publication to active exploitation.

In KEV catalog1,754

New KEV · 24H0

Exploit Today ≥ 701,665

Distribution · last window

Critical
3,485
High
15,862
Medium
14,806
Low
1,460

Filters

Window

Severity

Flags

Vulnerabilities2,961–3,000 · 16,596

CVECVSSEPSSKEVRExploitTitleMod.

CVE-2026-98580—

10.7%

——3In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: Fix race condition in accept_queue lifecycle In nfc_llcp_socket_release(), sockets and listener accept queues are walked under the local sockets rwlock and bh_lock_sock(). However, bh_lock_sock() does not synchronise against process-context lock_sock() held by nfc_llcp_accept_dequeue() during accept(). Because socket_release() does not check sock_owned_by_user(), both paths can concurrently unlink and release the same child socket, resulting in use-after-free or a NULL pointer dereference of child->parent in nfc_llcp_accept_unlink(). Fix this synchronisation race by having nfc_llcp_socket_release() use process-context lock_sock() instead of bh_lock_sock(): 1. Pop sockets from the local sockets list under the write lock using nfc_llcp_sock_list_pop() so lock_sock() can be acquired without holding the rwlock. 2. Because lock_sock() can sleep, defer the final release of the nfc_llcp_local structure to a workqueue (release_work). This avoids a sleeping-in-atomic bug when the last local reference is dropped from softirq context. Additionally, hold a single device reference on local from registration until final destruction. 3. In nfc_llcp_local_get(), use kref_get_unless_zero() to prevent resurrecting a local object whose teardown has been scheduled. 4. In llcp_sock_accept(), verify that the listener socket state is still LLCP_LISTEN after waking from schedule_timeout() to prevent hangs if the listener is closed concurrently. 5. When unlinking unaccepted child sockets during listener release, unlink them from local->sockets, call sock_orphan(), and drop their initial sk_alloc creation reference via sock_put(). 6. Make nfc_llcp_accept_unlink() idempotent by guarding parent access with a NULL check.2d CVE-2026-98579—

10.6%

——3In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: fix sdreq TLV list leak on parse/alloc/send failure nfc_genl_llc_sdreq() builds a list of TLV nodes while walking nested netlink attrs, but 3 error paths (nested-attr parse failure, TLV alloc ENOMEM, nfc_llcp_send_snl_sdreq() failure) all skip freeing what was already queued. Route them through a new free_list label, mirroring the SDRES path in the same file which already does this. Harmless on the success path too -- send_snl_sdreq() drains the list as it moves nodes, so it's already empty by the time free_list runs.2d CVE-2026-98578—

10.6%

——3In the Linux kernel, the following vulnerability has been resolved: nfc: st21nfca: validate ISO15693 inventory length The ISO15693 inventory helper removes a two-byte prefix without checking that it exists, then accepts a one-byte remainder before reading data[1] as the DSFID. Require the prefix and at least two remaining bytes before copying the UID data and reading the DSFID.2d CVE-2026-98577—

10.6%

——3In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: fix WKS SAP hijacking via prefix match in nfc_llcp_wks_sap() nfc_llcp_wks_sap() compares only service_name_len bytes, so a short service_name like "u" matches longer WKS strings like "urn:nfc:sn:snep". Fix by requiring exact length match before strncmp().2d CVE-2026-98576—

10.6%

——3In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: fix slab-out-of-bounds reads when logging service names nfc_llcp_wks_sap() and nfc_llcp_build_sdreq_tlv() pass non-null- terminated strings to pr_debug() using the %s format specifier. The buffers are allocated via kmemdup() or come from netlink attributes and are not guaranteed to be null-terminated, causing __dynamic_pr_debug() to read beyond the allocated region: KASAN: slab-out-of-bounds Read in __dynamic_pr_debug Fix both call sites by using %.*s with the explicit length to limit the output to the actual length of the string.2d CVE-2026-98575—

10.6%

——3In the Linux kernel, the following vulnerability has been resolved: nfc: pn533: fix OOB read in pn533_acr122_is_rx_frame_valid() frame->ccid.datalen is read directly from the USB response frame and used, unchecked, as an index into frame->data[]. A malicious or malfunctioning device can set this field to an arbitrary value, causing the driver to read far outside the received buffer. Bound ccid.datalen against the maximum possible ACR122 frame size before using it. This replaces the existing datalen == 0 check, since datalen < 2 already covers that case and additionally rejects datalen == 1, which would still underflow the "datalen - 2" offset used below.2d CVE-2026-98574—

9.0%

——3In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: stop Tx NAPI before disabling the queues bcmgenet_netif_stop() and the Wake-on-LAN branch of bcmgenet_suspend() both disable the Tx queues first and stop Tx NAPI several steps later. A completion in flight calls netif_tx_wake_queue() in between, and nothing stops the queue again, so a transmit can reach the rings after they have been freed. Close is safe because dev_deactivate_many() stops the qdisc first. bcmgenet_suspend() does not, so stop Tx NAPI before the queues on both paths. KASAN on a Raspberry Pi CM4, driven from an MTU change because suspend freezes user space before the callback runs: BUG: KASAN: use-after-free in bcmgenet_xmit+0x17f8/0x2258 Write of size 8 at addr ffffff8055844a68 by task ksoftirqd/0/14 bcmgenet_xmit+0x17f8/0x2258 dev_hard_start_xmit+0x13c/0x588 sch_direct_xmit+0x108/0x340 __dev_queue_xmit+0x1190/0x38482d CVE-2026-98573—

10.6%

——3In the Linux kernel, the following vulnerability has been resolved: net: skbuff: fix pull-bound underflow in skb_checksum_setup_ipv6() skb_maybe_pull_tail() subtracts skb_headlen(skb) from the unsigned max argument and passes the result to __pskb_pull_tail() as a signed int. The function does not ensure that max is at least skb_headlen(skb). This can happen while parsing IPv6 extension headers when an skb already has a linear area larger than MAX_IPV6_HDR_LEN. Once the parser needs data beyond the linear area, max - skb_headlen(skb) wraps and is converted to a negative delta. __pskb_pull_tail() then passes that negative length to skb_copy_bits(), where it can become a very large copy length. Pass the requested length itself as the pull bound at the three extension-header call sites, so the delta can no longer go negative.2d CVE-2026-98572—

10.0%

——3In the Linux kernel, the following vulnerability has been resolved: bpf: Fix immediate JMP JEQ/JNE on MIPS32 An addu instruction was emitted instead of addiu, causing the immediate value 1 to be interpreted as register $at. This made the comparison result invalid when the immediate operand was negative. Note that $at is mapped to BPF_REG_AX, which is used for constant blinding. Fix the instruction to use the immediate form. Found with test_bpf on MIPS32r1 emulated by QEMU.2d CVE-2026-98571—

9.0%

——3In the Linux kernel, the following vulnerability has been resolved: net: stmmac: clear stale buf->page after recycling on skb build failure In stmmac_rx(), when napi_build_skb() fails the descriptor page is recycled back to the page pool with page_pool_recycle_direct(), but buf->page is left pointing at the recycled page, unlike every other consumption site in the function which clears the pointer after handing the page away. With the stale pointer stmmac_rx_refill() skips the replacement allocation and programs the already-recycled page back into the RX descriptor. Clear buf->page on the napi_build_skb() failure path to keep the buffer lifecycle consistent with the other consumption sites.2d CVE-2026-98570—

8.1%

——2In the Linux kernel, the following vulnerability has been resolved: net: ipv6: keep room for the mac header in dst_dev_overhead() The seg6, ioam6 and rpl lwtunnels size their skb_cow_head() request as the length they are about to push plus dst_dev_overhead(), then push the new headers and rebuild the mac header below them with skb_mac_header_rebuild(). That rebuild needs skb->mac_len of headroom, but dst_dev_overhead() leaves LL_RESERVED_SPACE() of the egress device, 16 bytes for plain Ethernet. Where the mac header is longer than that, as it is on ingress through a VLAN device with reorder_hdr off, the rebuild runs out of room: skb_set_mac_header(skb, -skb->mac_len) computes a negative offset, stores it unchecked in the u16 skb->mac_header, and the memmove that follows writes skb->mac_len bytes about 64 KB past skb->head. Forwarding plain ping6 traffic through such a device reproduces it on all five seg6 encapsulation modes and on the rpl and ioam6 inline paths; skb->mac_header comes back as 65534 on a 704-byte head. Return the larger of the two. The helper already returns skb->mac_len when it has no dst, so this only makes the other branch agree, and it covers every caller rather than each call site in turn.2d CVE-2026-98569—

10.6%

——3In the Linux kernel, the following vulnerability has been resolved: ip_gre: Reject enabling collect metadata through changelink ipgre_netlink_parms() can enable collect_md on an existing GRE, GRETAP or ERSPAN device. Unlike newlink, changelink does not enforce metadata tunnel uniqueness. Converting a non-metadata device can therefore replace the metadata receive entry for another device of the same type in the same netns. Deleting either device then clears the shared entry, breaking metadata receive lookup for the surviving device. If parameter validation fails after collect_md is set, deleting the modified device can also clear an entry it never owned. Reject enabling metadata mode in both changelink callbacks before any encapsulation or tunnel parameters are modified. Allow requests that repeat the metadata attribute on an existing metadata device.2d CVE-2026-98568—

9.3%

——3In the Linux kernel, the following vulnerability has been resolved: vxlan: use one headroom snapshot for neighbour replies vxlan_na_create() samples LL_RESERVED_SPACE() to size the reply skb and then samples it again to reserve headroom. A concurrent vxlan_changelink() can update needed_headroom between the two reads, creating a TOCTOU race. The second value can exceed the allocation and make the Ethernet header write out of bounds. The race is reproducible on the unpatched kernel. It occurred when vxlan_na_create() generated a neighbour reply while vxlan_changelink() changed the link headroom. KASAN caught a four-byte write two bytes beyond a 704-byte skbuff_small_head allocation. Snapshot the headroom once and use that value for both allocation and reservation.2d CVE-2026-98567—

10.6%

——3In the Linux kernel, the following vulnerability has been resolved: net: xps: reject an out of range traffic class Only the entries below dev->num_tc are valid in dev->tc_to_txq[], and dev->prio_tc_map[] may only name classes below it. netdev_set_num_tc() lowers dev->num_tc without touching either array. netdev_txq_to_tc() walks all TC_MAX_QUEUE slots and netdev_get_prio_tc_map() returns the entry as it stands, so a leftover entry is handed out as a traffic class >= dev->num_tc. Taking that class from netdev_txq_to_tc(), __netif_set_xps_queue() rejects only a negative one and indexes an XPS map sized for dev->num_tc classes: tci = j * num_tc + tc; RCU_INIT_POINTER(new_dev_maps->attr_map[tci], map); attr_map[] holds nr_ids * num_tc entries and j runs over the ids named in the mask, so a class that is not below num_tc pushes tci past the end of the map for the last ids and the store overruns it. Any caller that lowers num_tc leaves such entries behind, and mqprio_destroy() tears down with netdev_set_num_tc(dev, 0) rather than netdev_reset_tc(). After mqprio with 8 classes then 1, tc_to_txq[1..7] still describe txq 1..7. The splat is from an XPS write to txq 2 on a veth with 8 rx queues: attr_map[] has 8 * 1 entries, tci = j + 2, and j == 6 stores one past the end of the 88-byte map: BUG: KASAN: slab-out-of-bounds in __netif_set_xps_queue (net/core/dev.c:2954) Write of size 8 at addr ffff88813016bc58 by task xps_oob/634 __netif_set_xps_queue (net/core/dev.c:2954) xps_rxqs_store (net/core/net-sysfs.c:1880) netdev_queue_attr_store (net/core/net-sysfs.c:1390) Allocated by task 634: __kmalloc_noprof (mm/slub.c:5439) __netif_set_xps_queue (net/core/dev.c:2937) The buggy address is located 0 bytes to the right of allocated 88-byte region [ffff88813016bc00, ffff88813016bc58) Reject a class the map has no room for.2d CVE-2026-98566—

9.3%

——3In the Linux kernel, the following vulnerability has been resolved: drm/imagination: clamp freelist reconstruction requests The firmware reconstruction count controls accesses to the request's fixed freelist ID array and the copy into the fixed response array. Neither access currently bounds the count to those protocol arrays. Clamp the count to the request capacity, which is shared by the response layout, and use that count consistently for reconstruction and response publication. Keep the firmware recovery exchange instead of dropping an oversized request without a response, as discussed with the firmware maintainer. The issue was found by our static-analysis tool.2d CVE-2026-98565—

9.3%

——3In the Linux kernel, the following vulnerability has been resolved: net: dsa: mt7530: fix NULL dereference on unbind of MT7531 and MT7621 The core and io supplies are only requested for ID_MT7530: both the devm_regulator_get() in probe and the regulator_enable() in mt7530_setup() are guarded by the switch id, but mt7530_remove() disables them unconditionally. On an MT7621 or an MT7531 both pointers are still NULL from devm_kzalloc(), so rmmod or a sysfs unbind calls regulator_disable() on NULL.2d CVE-2026-98564—

9.0%

——3In the Linux kernel, the following vulnerability has been resolved: net: dsa: mt7530: leave the MDIO IRQ mappings to regmap-irq mt7530_remove_common() disposes the per-PHY interrupt mappings from .remove, but the regmap-irq chip that owns the domain is devm-registered, so its parent interrupt is only freed once .remove has returned. The switch's own regmap-irq thread can therefore still dispatch on a mapping that is already gone: irq_find_mapping() returns 0, irq_to_desc() returns NULL and handle_nested_irq() locks desc->lock without checking it. The attached PHYs have not given those interrupts back yet either, which the kernel warns about a moment before the fault. regmap_del_irq_chip() disposes the same mappings itself, after freeing the parent interrupt and before removing the domain, so there is nothing left for the driver to do here. Until it runs the descriptors stay alive, and a late dispatch on one of them is harmless: dsa_unregister_switch() has freed the PHY handlers by then, so handle_nested_irq() finds no action and returns.2d CVE-2026-98563—

9.0%

——3In the Linux kernel, the following vulnerability has been resolved: net: phylink: record the PHY only once bringup cannot fail phylink_bringup_phy() stores the PHY in pl->phydev before its last fallible step: on a MAC whose phylink ops implement LPI, phy_eee_rx_clock_stop() can fail with a real MDIO error. The callers unwind with phy_detach(), which knows nothing about pl->phydev, so a pointer to a PHY that is no longer attached outlives the failed connect. What that costs depends on how the caller got here. phylink_connect_phy() goes through phylink_attach_phy(), which refuses to attach while pl->phydev is set, turning a transient MDIO error into a permanent -EBUSY. The SFP path is worse than that: sfp_sm_probe_phy() answers the failure with phy_device_remove() and phy_device_free(), and it assigns sfp->mod_phy only past that error return, so nothing clears pl->phydev and it is left pointing at a freed phy_device that phylink_resolve() and the ethtool helpers go on reading. phylink_fwnode_phy_connect() has no such check, so a later connect overwrites the stale pointer and hides the problem. A disconnect does not: phylink_disconnect_phy() hands that pointer to phy_disconnect(), and the second phy_detach() on the same PHY drops references the first one already released. Found while making a DSA port survive a PHY whose driver arrives after the switch probes: keeping the port across a failed connect and retrying is what makes this window reachable. Publish the pointer after the last call that can fail instead of unwinding it afterwards. Nothing between the two points reads pl->phydev, and the registration that follows cannot fail: phy_request_interrupt() falls back to polling on its own. The PHY-side state keeps the order it had, so no MDIO operation moves relative to another.2d CVE-2026-98562—

8.1%

——2In the Linux kernel, the following vulnerability has been resolved: net: libwx: fix races in Tx timestamp handling wx->ptp_tx_skb is shared between the Tx path, the PTP auxiliary worker and the timestamp cleanup paths. The WX_STATE_PTP_TX_IN_PROGRESS bit prevents multiple Tx paths from submitting timestamp requests, but does not serialize the worker against cleanup. As a result, wx_ptp_clear_tx_timestamp() can free an skb after wx_ptp_tx_hwtstamp_work() has obtained its pointer. The worker may then pass the freed skb to skb_tstamp_tx() and release the same reference again. The cleanup path may also clear the in-progress bit while the worker is still processing the old skb. This allows the Tx path to publish a new skb which the worker can subsequently overwrite with NULL, leaking its reference. Add a dedicated spinlock to protect publication and consumption of the Tx timestamp skb. Detach the skb and clear the in-progress bit while holding the lock, then deliver the timestamp and release the skb after dropping it. Use the same locked cleanup in the quiesce path, but keep the detach there free of register accesses: quiesce runs during PCIe error recovery, where MMIO is not reliable, and it deliberately did not touch the device before. The lock is taken with interrupts disabled, because netpoll can call ndo_start_xmit() with hard interrupts already off. When handling a Tx DMA mapping failure, keep the transmit path reference until after comparing the skb under the lock. This prevents skb address reuse from making the error path mistake a newer timestamp request for the failed one.2d CVE-2026-98561—

9.3%

——3In the Linux kernel, the following vulnerability has been resolved: nfp: hold IPsec RX state under the XArray lock nfp_net_ipsec_rx() drops the XArray lock before taking a reference to the xfrm_state it found. The delete path can erase the entry and drop the last state reference in that interval. RX can then try to increment a zero refcount after the state has been queued for destruction. The driver queues firmware invalidation asynchronously; the delete path does not wait for the command to complete or drain pending RX processing. The XFRM garbage collector waits for an RCU grace period before freeing the state. That delays reclamation but does not make acquiring a reference from zero valid. Take the xfrm_state reference before releasing the XArray lock so xa_erase() cannot run between lookup and reference acquisition.2d CVE-2026-98560—

8.1%

——2In the Linux kernel, the following vulnerability has been resolved: net/rds: size a connection's path set by the transport it ends up with __rds_conn_create() computes npaths from the caller's transport before it decides whether a connection to one of the host's own addresses is to be handled by the loopback transport instead. That substitution is what an RDS/TCP socket sending to a local address gets, and after it the path init loop still runs for the TCP transport's RDS_MPATH_WORKERS paths and allocates an ordered workqueue for each, while rds_loop_conn_alloc() only ever provides transport data for path 0. rds_conn_destroy() sizes its teardown from c_trans, by then the loopback transport, so it visits path 0 only - and rds_conn_path_destroy() would skip the other paths anyway, since it returns before destroy_workqueue() for a path without transport data. kfree(c_path) then drops the last pointers to seven workqueues. That repeats for every such connection, on every netns teardown or module unload, and every distinct local destination address is a separate connection. Recompute npaths once the transport is final, so that creation and destruction agree on the set of paths. The c_path array stays sized for the caller's transport; the unused entries are freed with it.2d CVE-2026-98559—

10.0%

——3In the Linux kernel, the following vulnerability has been resolved: net/smc: fix UAF on lgr list traversal in smcr_port_err() smcr_port_err() traverses smc_lgr_list.list without holding smc_lgr_list.lock, allowing a concurrent smc_lgr_terminate_sched() to free an lgr while it is still being dereferenced. Hold smc_lgr_list.lock across the traversal. Update smc_ib_gid_check() to call smcr_port_err() after releasing the lock.2d CVE-2026-98558—

8.1%

——2In the Linux kernel, the following vulnerability has been resolved: net: flush skb_defer_nodes in dev_cpu_dead() When a CPU goes offline, dev_cpu_dead() drains its softnet queues (completion_queue, output_queue, poll_list, process_queue, and input_pkt_queue), but leaves net_hotdata.skb_defer_nodes untouched. If oldcpu goes offline while holding pending skbs in its skb_defer_nodes lists (e.g. below the sysctl_skb_defer_max >> 1 IPI threshold, or if the IPI races with CPU teardown), those skbs remain stranded until oldcpu is brought back online. If any of these skbs hold page_pool fragments, page_pool_destroy() will stall indefinitely waiting for inflight pages to be returned when a netdev or driver is torn down while oldcpu is offline. Additionally, if smp_call_function_single_async() fails in kick_defer_list_purge() because the target CPU went offline, reset defer_ipi_scheduled to 0 so future IPI kicks are not blocked when the CPU comes back online. Also, if oldcpu was the last online CPU on its NUMA node, drain that node's slot across all CPUs so no skbs deferred from that node remain stranded on idle remote CPUs (or if the node itself is subsequently offlined). Finally, in skb_attempt_defer_free(), re-check cpu_online(cpu) and whether the caller migrated CPUs after llist_add(), flushing the node list if so, to close the preemption TOCTOU race against CPU/node teardown.2d CVE-2026-98557—

9.0%

——3In the Linux kernel, the following vulnerability has been resolved: gve: DQO: fix header length used by gve_can_send_tso() for UDP GSO gve_can_send_tso() computes how many buffers each segment of a GSO packet would span, and for this it needs the length of the headers that the device replicates in front of every segment. It unconditionally uses skb_tcp_all_headers(), which reads the doff field of the TCP header. SKB_GSO_UDP_L4 packets have no TCP header: tcp_hdrlen() then reads one byte of the UDP payload, and header_len can be anything in [0, 60] instead of the transport offset plus the eight bytes of the UDP header that gve_prep_tso() programs into the TSO context descriptor. A wrong header length shifts all the segment boundaries computed in the loop, so the number of buffers per segment can be over or under estimated. In the first case, GSO is needlessly disabled for this packet by gve_features_check_dqo() and the stack has to segment it. In the second case, the driver hands the device a packet whose segments span more than GVE_TX_MAX_DATA_DESCS buffers. Use the UDP header length for SKB_GSO_UDP_L4 packets, matching what gve_prep_tso() does.2d CVE-2026-98556—

9.0%

——3In the Linux kernel, the following vulnerability has been resolved: gve: DQO: reject TSO packets with an out of range MSS gve_prep_tso() notes that the device requires the MSS to be <= 9728, but does not enforce it, assuming the 9K MTU enforced by the hypervisor and the 64KB limit on TSO sizes are enough. This does not hold for packets that were not generated locally. A guest behind a tap, or any packet socket user, can provide an arbitrary gso_size in virtio_net_hdr. Layer 2 forwarding does not check the MTU for GSO packets (is_skb_forwardable()), and gso_features_check() only bounds skb->len and gso_segs, never gso_size. Such a packet reaches gve_tx_fill_tso_ctx_desc(), which puts gso_size into the mss field of the TSO context descriptor. This field is 14 bits wide, so a gso_size of 16384 is silently turned into an MSS of zero. Drop these packets from gve_prep_tso(), and make sure that gve_features_check_dqo() leaves their GSO bits alone: skb_segment() splits at gso_size regardless of the MTU, so falling back to software segmentation would give the device non TSO packets bigger than the 9728 bytes it supports. Note that the device can still be given oversized non TSO packets when the stack segments in software for other reasons, for instance after TSO has been disabled with ethtool. This is a generic issue, because the MTU check is skipped for GSO packets in the forwarding path, and is addressed separately.2d CVE-2026-98555—

10.7%

——3In the Linux kernel, the following vulnerability has been resolved: llc: fix skb UAF and leaks on llc_mac_hdr_init() failure In llc_conn_ac_resend_i_xxx_x_set_0_or_send_rr(), if llc_mac_hdr_init() fails, kfree_skb(skb) is called instead of kfree_skb(nskb). This leaks the newly allocated nskb, reads from the freed skb via LLC_I_GET_NR(pdu), and double-frees skb when llc_conn_state_process() drops its reference. In llc_sap_action_send_xid_r() and llc_sap_action_send_test_r(), nskb is leaked if llc_mac_hdr_init() returns an error. Free nskb in all three error paths.2d CVE-2026-98554—

10.6%

——3In the Linux kernel, the following vulnerability has been resolved: vlan: ensure sufficient headroom in vlan_dev_hard_header() Callers that only reserve ETH_HLEN or less (such as llc_alloc_frame()), or skbs allocated before dynamic device/headroom changes (e.g. toggling VLAN_FLAG_REORDER_HDR or bonding/team switching slaves), can reach vlan_dev_hard_header() with insufficient headroom and trigger skb_under_panic(). Use skb_cow_head() in vlan_dev_hard_header() when VLAN_FLAG_REORDER_HDR is not set to ensure sufficient headroom for the VLAN header(s) and the underlying device hard header. Use READ_ONCE() to read dev->hard_header_len and dev->needed_headroom as they can be updated concurrently under RTNL (e.g. in vlan_transfer_features()) while vlan_dev_hard_header() runs locklessly on the transmit path. Also avoid LL_RESERVED_SPACE(dev) here so that the extra HH_DATA_MOD alignment padding does not trigger unnecessary pskb_expand_head() reallocations on inner stacked VLAN devices after the outer VLAN header has been pushed.2d CVE-2026-98553—

10.6%

——3In the Linux kernel, the following vulnerability has been resolved: autofs: fix sbi->pipe file reference leak in autofs_kill_sb() When autofs_fill_super() fails before clearing AUTOFS_SBI_CATATONIC (for example, when find_get_pid() fails on an invalid pgrp mount option, or when an fs_context is closed before mounting), deactivate_locked_super() invokes autofs_kill_sb() -> autofs_catatonic_mode(sbi). Because AUTOFS_SBI_CATATONIC is still set in sbi->flags, autofs_catatonic_mode() returns early without calling fput(sbi->pipe), permanently leaking the pipe struct file reference. Explicitly release sbi->pipe in autofs_kill_sb() if it is still non-NULL after autofs_catatonic_mode().2d CVE-2026-98552—

9.0%

——3In the Linux kernel, the following vulnerability has been resolved: perf/core: Fix a refcount leak in attach_perf_ctx_data() The attach_perf_ctx_data() can race on global and !global cases. The global case is protected by global_ctx_data_rwsem and shares a single reference count using perf_ctx_data.global field. But when it races with !global case, it may miss to set the global field and result in a reference count leak. CPU1 CPU2 ---------------------------------------------------------------- attach_task_ctx_data(.global=1) attach_task_ctx_data(.global=0) cd1 = alloc_perf_ctx_data(); cd2 = alloc_perf_ctx_data(); // { .global = 0, .refcount = 1 }; try_cmpxchg(); // success, // task->perf_ctx_data = cd2 try_cmpxhg(); // fail; old = cd2 refcount_inc_not_zero(&old->refcount); // success // old.refcount = 2 free_perf_ctx_data(cd1); Then later detach_global_ctx_data() will see the data but it's not marked as global, so it won't call detach_task_ctx_data().2d CVE-2026-98551—

8.1%

——2In the Linux kernel, the following vulnerability has been resolved: perf/core: Fill branch entries with a single assignment perf_clear_branch_entry_bitfields() clears the bitfields of struct perf_branch_entry one by one and leaves from/to alone, since callers overwrite those straight away. The list has to be kept in sync with the struct by hand and has already fallen behind: new_type and priv were added to perf_branch_entry and never added here. Only BRBE writes those two, and neither for every record. brbe_set_perf_entry_type() leaves new_type alone for a branch type it does not recognise, and priv is not set for source-only records. arm_pmuv3.c allocates the per-CPU branch stack with kmalloc(), so such a record reaches userspace with whatever the slot held: uninitialised kmalloc() data on the first pass over the buffer, the previous record's values after that. Nothing under arch/x86/events/ writes either field, so only arm64 is affected. Assign the whole entry at each site instead. Everything not named is then zero, and there is no list to keep in sync. The bitfields add up to exactly 64 bits, so the struct has no padding to leave undefined. perf_clear_branch_entry_bitfields() has no callers left, so remove it. perf_entry_from_brbe_regset() assigns an empty literal instead, since it fills from/to conditionally. PERF_BR_SPEC_NA is 0, so dropping the explicit spec assignment changes nothing.2d CVE-2026-98550—

10.7%

——3In the Linux kernel, the following vulnerability has been resolved: tipc: reject invalid and unexpected GRP_ACK_MSG to prevent bc_ackers underflow Commit 48a5fe38772b ("tipc: fix bc_ackers underflow on duplicate GRP_ACK_MSG") rejected duplicate/stale ACKs in tipc_group_proto_rcv() by returning early when less_eq(acked, m->bc_acked). However, that check remains incomplete in two ways: 1. When grp->bc_ackers is zero (e.g. on a quiet group, when replicast ACKs were not requested, or after all expected members have already acknowledged), an unexpected GRP_ACK_MSG with acked > m->bc_acked passes less_eq() and unconditionally decrements grp->bc_ackers. Because bc_ackers is a u16, this wraps to 65535, causing tipc_group_bc_cong() to permanently report congestion and blocking all future group broadcasts on the socket. 2. During an active broadcast round (grp->bc_ackers > 0), the sender transmits packet S and advances grp->bc_snd_nxt to S + 1. Receivers increment their expected counter to S + 1 upon consuming packet S, so the only valid ACK value for the current round is strictly acked == grp->bc_snd_nxt. However, tipc_group_update_bc_members() initializes each member's m->bc_acked to prev = grp->bc_snd_nxt - 1 (S - 1 before increment). This leaves a 2-sequence gap (S - 1 to S + 1) in sequence space. An incoming ACK is therefore neither rejected as duplicate nor prevented from decrementing grp->bc_ackers if an unexpected or stale value (such as S) is received. A member sending acked = S followed by acked = S + 1 could decrement grp->bc_ackers twice in the same round, prematurely clearing bc_ackers or underflowing it. Fix this by: - Dropping GRP_ACK_MSG immediately if grp->bc_ackers is zero. - Requiring acked == grp->bc_snd_nxt and rejecting duplicates where m->bc_acked == acked. Because replicast broadcast rounds are strictly sequential, only grp->bc_snd_nxt can be acknowledged, and each member can acknowledge at most once per round. Note that a related pre-existing issue in tipc_group_delete_member() (where grp->bc_ackers decrementing to zero upon member departure does not restore *grp->open or trigger a socket wakeup) will be addressed in a separate patch.2d CVE-2026-98549—

2.3%

——1In the Linux kernel, the following vulnerability has been resolved: tcp: prevent collapsing skbs across boundary in rtx queue tcp_write_collapse_fence() sets TCP_SKB_CB(skb)->eor = 1 on tcp_write_queue_tail(sk) to prevent skbs queued after a switch to device encryption from being collapsed into earlier skbs. The fence is a no-op if all earlier data has already been transmitted when the switch happens: sk->sk_write_queue is empty. The not yet acknowledged earlier skbs wait in sk->tcp_rtx_queue with eor 0. On a subsequent retransmit or SACK shift, tcp_retrans_try_collapse() or tcp_shift_skb_data() can then merge an skb queued after the switch into one queued before it. Both users of the fence are affected: - psp: devices only encrypt skbs with skb->decrypted set. The merged skb keeps decrypted = 0 from the earlier skb, so merged data sent after psp_sock_assoc_set_tx() is retransmitted in cleartext. - tls device offload: the merged skb straddles the start marker set in tls_set_device_offload(). The software fallback (fill_sg_in() returns -EINVAL) and the mlx5, nfp and funeth drivers cannot handle such an skb and drop it. Every retransmit rebuilds the same skb, so the connection stalls. Fix this in two places, for defense in depth: 1. Fall back to tcp_rtx_queue_tail(sk) in tcp_write_collapse_fence() when tcp_write_queue_tail(sk) is NULL. 2. Check !skb_cmp_decrypted(to, from) in tcp_skb_can_collapse(), as tcp_skb_can_collapse_rx() does on receive. skb_shift(), which both collapse paths call, already has a DEBUG_NET_WARN_ON_ONCE() for this condition.2d CVE-2026-98548—

10.7%

——3In the Linux kernel, the following vulnerability has been resolved: sctp: discard the rest of the packet on a stale-cookie error When an association is in COOKIE-ECHOED state and the peer sends a bundled [ERROR(Stale Cookie)][DATA] packet from one of its non-primary addresses, processing the ERROR chunk takes the non-fatal stale-cookie retry path sctp_sf_do_5_2_6_stale(), which queues SCTP_CMD_DEL_NON_PRIMARY while keeping the association alive. sctp_cmd_del_non_primary() removes every non-primary transport - including the very transport this packet arrived on, which is still referenced by the receive lookup and shared by all chunks of the packet via chunk->transport. sctp_assoc_rm_peer() does redirect asoc->peer.last_data_from away from the removed transport, but right afterwards the bundled DATA chunk makes sctp_assoc_bh_rcv() re-register asoc->peer.last_data_from = chunk->transport unconditionally, undoing the redirection with the just-removed transport. Once the packet is done, the receive reference is dropped and the transport is RCU-freed, while the surviving association keeps the dangling last_data_from. A later FWD-TSN (or the delayed SACK timer) makes sctp_gen_sack() dereference it (->param_flags and friends), and sctp_make_sack()/sctp_outq_select_transport() may write to the freed object and link it into the live transport list. This is a use-after-free triggerable by any malicious SCTP peer (or a local unprivileged user acting as one) with no capabilities required: BUG: KASAN: slab-use-after-free in sctp_do_sm+0x498a/0x5660 Read of size 4 at addr ffff88800e1e356c by task poc/115 Call Trace: sctp_do_sm <- sctp_assoc_bh_rcv <- sctp_inq_push <- sctp_rcv <- ip_protocol_deliver_rcu <- ip_rcv Allocated: sctp_transport_new <- sctp_assoc_add_peer <- sctp_process_init (INIT-ACK processing) Freed: kfree <- sctp_transport_destroy_rcu <- rcu_core (call_rcu queued by sctp_transport_put at end of sctp_rcv) The buggy address is located 364 bytes inside of freed 1024-byte region [ffff88800e1e3400, ffff88800e1e3800), cache kmalloc-1k Note that commit 03a9d10ecf71 ("sctp: drop a chunk if its transport was removed") only covers the window between the receive lookup and the chunk processing (e.g. an ASCONF DEL-IP racing the socket backlog); here the transport is removed *while* the packet is being processed, by an earlier chunk of the same packet, so the drop in sctp_inq_push() does not reach this path. Verified with the bundled [ERROR(Stale Cookie)][DATA] + FWD-TSN reproducer: the KASAN report above still fires with that commit applied, and is gone with this patch on top. Fix it by discarding the rest of the packet on this path, as suggested by Xin. After the stale-cookie ERROR has sent the association back to COOKIE-WAIT and removed the non-primary transports, the remaining chunks of the packet can only run against the restarted handshake while referencing the removed arrival transport through chunk->transport: besides the last_data_from registration above, sctp_cmd_setup_t2() and the sctp_make_*() reply builders would also copy that pointer into association-lifetime state that sctp_assoc_rm_peer() has already sanitized. Let the peer retransmit them, in line with what sctp_inq_push() does for chunks whose transport was removed before processing.2d CVE-2026-98547—

10.7%

——3In the Linux kernel, the following vulnerability has been resolved: af_packet: fix integer overflow in prb_calc_retire_blk_tmo() prb_calc_retire_blk_tmo() computes in 32-bit int arithmetic: mbits = (blk_size_in_bytes * 8) / (1024 * 1024); If I'm reading the validation right, tp_block_size is user controlled and packet_set_ring() only rejects values that are <= 0 as int or not page aligned, so a 256MiB block goes right through (and alloc_one_pg_vec_page() even has a vzalloc fallback for it). 0x10000000 * 8 wraps to INT_MIN, and on a NIC reporting 1 Gbps (div == 1) the function ends up returning -2047. The condition is actually (8 * size) mod 2^32 >= 2^31 && div == 1, so the trigger set is [256,512), [768,1024), [1280,1536) and [1792,2048) MiB. Other sizes wrap to non-negative values and faster links divide the unsigned value back below 2^31, which is why this doesn't blow up for everyone. What makes it fatal is what happens next in init_prb_bdqc(): p1->interval_ktime = ms_to_ktime(prb_calc_retire_blk_tmo(...)); hrtimer_start(&p1->retire_blk_timer, p1->interval_ktime, HRTIMER_MODE_REL_SOFT); A negative relative timeout expires immediately. The callback unconditionally returns HRTIMER_RESTART, and hrtimer_forward() turns the negative interval into hrtimer_resolution: if (interval < hrtimer_resolution) interval = hrtimer_resolution; So the SOFT timer re-fires at the maximum rate forever, holding sk_receive_queue.lock each pass. One CPU spins in softirq until the socket is closed. Repeat with more rings and the machine is gone. The overflow itself is ancient - it was introduced together with TPACKET_V3 in f6fb8f100b80 ("af-packet: TPACKET_V3 flexible buffer implementation."). Its effect prior to f7460d2989fa ("net: af_packet: Use hrtimer to do the retire operation", v6.18) was not as clear-cut, though: the return value was stored into an unsigned short retire_blk_tov, so a negative result was truncated, and a 0-jiffy delay loop could be programmed as well. Neither is nearly as detrimental as the immediate maximum-rate spin the hrtimer conversion turned it into. (Unrelated to CVE-2019-20812 - that one was the ethtool failure path returning 0, which now returns DEFAULT_PRB_RETIRE_TOV.) Reproducer, needs CAP_NET_RAW (a --network host container has it by default) and a 1 Gbps NIC (QEMU e1000 works): int fd = socket(AF_PACKET, SOCK_RAW, htons(ETH_P_ALL)); bind(fd, ...); int v = TPACKET_V3; setsockopt(fd, SOL_PACKET, PACKET_VERSION, &v, sizeof(v)); struct tpacket_req3 req = { .tp_block_size = 0x10000000, .tp_block_nr = 1, .tp_frame_size = 2048, .tp_frame_nr = 0x10000000 / 2048, .tp_retire_blk_tov = 0, }; setsockopt(fd, SOL_PACKET, PACKET_RX_RING, &req, sizeof(req)); Compute in 64 bits instead. The operands are already bounded by the existing validation, so nothing else changes. If you'd prefer a different fix, just say so and I'll respin.2d CVE-2026-98546—

9.3%

——3In the Linux kernel, the following vulnerability has been resolved: arm64/boot: Disable trapping of PMZR_EL0 writes to EL2 __init_el2_fgt2() writes one mask to both HDFGRTR2_EL2 and HDFGWTR2_EL2. PMZR_EL0 is write-only, so its trap bit, nPMZR_EL0, exists only in HDFGWTR2_EL2 and is therefore never set: a PMZR_EL0 write from the host traps to EL2, where the nVHE hypervisor has no handler and BUG()s. The kernel never writes PMZR_EL0, but kernel.perf_user_access=1 has the PMU driver set PMUSERENR_EL0.UEN for a task with a user-read event, so a write from EL0 reaches the trap and takes the host down without a panic message. Accumulate the HDFGWTR2_EL2 bits separately, as __init_el2_fgt() already does for HDFGWTR_EL2, and set nPMZR_EL0 with the other FEAT_PMUv3p9 bits.2d CVE-2026-98545—

9.2%

——3In the Linux kernel, the following vulnerability has been resolved: ata: libata-scsi: bound the ATA passthru sense descriptor writes When an ATA PASS-THROUGH command to an ATAPI device fails, the sense buffer holds the device's REQUEST SENSE reply, and ata_scsi_set_passthru_sense_fields() trusts its additional length byte, sb[7], when adding the ATA Status Return descriptor. A faulty or malicious device can use that to make the kernel read and write past the 96-byte buffer in three ways: - scsi_sense_desc_find() is passed sb[7] + 8 as the buffer length, so its clamp against sb[7] does nothing and the walk runs off the end. - A type-9 descriptor found near the end is filled in unchecked. - A new descriptor at sb[8 + len] needs len + 22 bytes, not len + 14, so len 75..82 writes up to 8 bytes past the end. Reproduced with KASAN under qemu, with the emulated ATAPI REQUEST SENSE reply patched: BUG: KASAN: slab-out-of-bounds in scsi_sense_desc_find+0x1a5/0x210 BUG: KASAN: slab-out-of-bounds in ata_scsi_qc_complete+0x1a15/0x1a50 Both are gone with this patch, and a valid descriptor is still filled in.2d CVE-2026-98544—

9.2%

——3In the Linux kernel, the following vulnerability has been resolved: bna: prevent IOC timer rearm during teardown bna: prevent IOC timer rearm during teardown bnad_pci_remove() and the probe disable_ioceth path call timer_delete_sync() for ioc_timer, sem_timer and hb_timer, but not for iocpf_timer. bnad_iocpf_timeout() then takes bnad->bna_lock after free_netdev() has freed the struct bnad. Deleting iocpf_timer last does not fix this. sem_timer and iocpf_timer rearm each other: bnad_iocpf_sem_timeout() can arm iocpf_timer, and bnad_iocpf_timeout() arms sem_timer from bfa_ioc_hw_sem_get() when the semaphore is busy. timer_delete_sync() only waits out its own callback. bnad_ioceth_disable() can time out and leave that callback live. Shut all four IOC timers down with timer_shutdown_sync() on both paths, so a later mod_timer() is ignored. This issue was identified during our ongoing static-analysis research while reviewing kernel code.2d CVE-2026-98543—

9.0%

——3In the Linux kernel, the following vulnerability has been resolved: bpf: fs/xattr: don't assume the inode is locked in path_unlink/path_rmdir bpf_lsm_has_d_inode_locked() makes the verifier rewrite bpf_[set|remove]_dentry_xattr() to the _locked variants, which assume that the caller already holds the inode's i_rwsem. The path_unlink and path_rmdir hooks are listed, but security_path_unlink() and security_path_rmdir() run before vfs_unlink()/vfs_rmdir() take the victim inode's i_rwsem, so a sleepable BPF LSM program attached to either hook mutates the victim's xattrs without the lock held. Drop the two path hooks from d_inode_locked_hooks so that the verifier keeps the locking bpf_[set|remove]_dentry_xattr() variants, which take the lock themselves.2d CVE-2026-98542—

9.0%

——3In the Linux kernel, the following vulnerability has been resolved: cgroup/cpuset: Return PERR_NOCPUS in remote_partition_enable() on subpartitions_cpus conflict When a remote partition is created underneath an existing local partition via a non-partition (PRS_MEMBER) intermediate cgroup, update_prstate() sees parent->partition_root_state == PRS_MEMBER and calls remote_partition_enable(). Commit 86888c7bd117 ("cgroup/cpuset: Add warnings to catch inconsistency in exclusive CPUs") replaced the cpumask_intersects(tmp->new_cpus, subpartitions_cpus) error check in remote_partition_enable() with WARN_ON_ONCE(). As a result, remote_partition_enable() emits a warning and proceeds to enable the remote partition on CPUs that are already owned by the ancestor local partition in subpartitions_cpus. This can be reproduced on Linux 7.3.0-rc3 with: mkdir -p /tmp/cg1 mount -t cgroup2 none /tmp/cg1 echo "+cpuset" > /tmp/cg1/cgroup.subtree_control mkdir /tmp/cg1/A echo 1 > /tmp/cg1/A/cpuset.cpus echo 1 > /tmp/cg1/A/cpuset.cpus.exclusive echo root > /tmp/cg1/A/cpuset.cpus.partition echo "+cpuset" > /tmp/cg1/A/cgroup.subtree_control mkdir /tmp/cg1/A/B echo 1 > /tmp/cg1/A/B/cpuset.cpus echo 1 > /tmp/cg1/A/B/cpuset.cpus.exclusive echo "+cpuset" > /tmp/cg1/A/B/cgroup.subtree_control mkdir /tmp/cg1/A/B/D echo 1 > /tmp/cg1/A/B/D/cpuset.cpus echo 1 > /tmp/cg1/A/B/D/cpuset.cpus.exclusive echo root > /tmp/cg1/A/B/D/cpuset.cpus.partition which triggers: WARNING: kernel/cgroup/cpuset.c:1594 at remote_partition_enable+0x1c1/0x300 and leaves both /tmp/cg1/A and /tmp/cg1/A/B/D as active root partitions claiming exclusive CPU 1. Fix this by returning PERR_NOCPUS when tmp->new_cpus intersects subpartitions_cpus in remote_partition_enable(), matching the error code used by remote_cpus_update() for the same subpartitions_cpus conflict, and add a regression test case to tools/testing/selftests/cgroup/test_cpuset_prs.sh. Tested in QEMU on Linux 7.3.0-rc3 using the reproducer above and tools/testing/selftests/cgroup/test_cpuset_prs.sh.2d CVE-2026-98541—

10.6%

——3In the Linux kernel, the following vulnerability has been resolved: fou: reject omitted FOU_ATTR_IPPROTO on FOU_ENCAP_DIRECT Commit 7a9bc9e3f423 ("fou: Don't allow 0 for FOU_ATTR_IPPROTO.") added NLA_POLICY_MIN(NLA_U8, 1) to fou_nl_policy[FOU_ATTR_IPPROTO], which rejects an explicitly supplied FOU_ATTR_IPPROTO == 0 attribute with -ERANGE. However, FOU_ATTR_IPPROTO is an optional netlink attribute. When a user sends FOU_CMD_ADD with FOU_ATTR_TYPE set to FOU_ENCAP_DIRECT and omits FOU_ATTR_IPPROTO entirely, nla_policy validation succeeds and parse_nl_config() leaves cfg->protocol as 0 (from memset(cfg, 0, sizeof(*cfg))). fou_create() then creates a FOU_ENCAP_DIRECT socket with fou->protocol == 0. In fou_udp_recv(), returning -fou->protocol to udp_queue_rcv_one_skb() triggers IP protocol resubmission when fou->protocol > 0, whereas returning 0 tells the UDP tunnel layer that the skb was consumed without freeing it. When fou->protocol == 0, every packet received on the socket returns 0 from fou_udp_recv() and leaks the sk_buff. Reject FOU_ENCAP_DIRECT when !cfg->protocol in fou_create() so that creating a direct encapsulation port without FOU_ATTR_IPPROTO fails with -EINVAL while leaving FOU_CMD_DEL and FOU_CMD_GET (which share parse_nl_config()) unaffected. Tested in QEMU against Linux 7.3.0-rc3 by sending a FOU_CMD_ADD Generic Netlink request with FOU_ATTR_PORT = 5555 and FOU_ATTR_TYPE = FOU_ENCAP_DIRECT while omitting FOU_ATTR_IPPROTO. On the unfixed kernel, FOU_CMD_ADD succeeds (err = 0), FOU_CMD_GET reports fou->type = 1 and fou->protocol = 0, and sending 4000 UDP packets to 127.0.0.1:5555 leaks all 4000 sk_buffs (SUnreclaim in /proc/meminfo grows from 41456 kB to 59008 kB, +17552 kB); with this patch applied, FOU_CMD_ADD is rejected with -EINVAL (-22).2d