CVE Watch402,574 en archivo total

Vulnerabilidades explotables hoy

15,732en la vista actual

Score único combinando CVSS, membresía KEV y EPSS. Cada CVE con su ficha propia — timeline desde publicación hasta explotación activa.

En catálogo KEV1,756

Nuevos KEV · 24H0

Exploit Today ≥ 701,689

Distribución · última ventana

Crítico
4,546
Alto
18,448
Medio
17,035
Bajo
1,709

Filtros

Ventana

Severidad

Filtros

Vulnerabilidades481–520 · 15,732

CVECVSSEPSSKEVRExplotTítuloVis.

CVE-2026-98892—

8.2%

——2In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Validate BASE_ERROR_EVENT payload size BASE_ERROR_EVENT carries a variable number of message reports, with the count encoded in error_status. The notification parser used that count without checking whether the received payload contained all reported entries. Reject truncated payloads before copying the report array.2d CVE-2026-98891—

7.4%

——2In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: validate deauth frame length before reason access ieee80211_rx_mgmt_deauth() reads the deauth reason code before checking that the fixed field is actually present in the received frame. Validate the deauth frame length first and only then read the reason code.2d CVE-2026-98890—

8.2%

——2In the Linux kernel, the following vulnerability has been resolved: wifi: libertas: reject short monitor TX frames In monitor mode, lbs_hard_start_xmit() casts skb->data to a radiotap TX header, skips that header, and then copies the 802.11 destination address from offset 4 in the remaining frame. The generic length check only rejects zero-length and oversized skbs, so a short monitor frame can be read past the end of the skb data. Require enough bytes for the radiotap TX header and the destination address field before using the monitor-mode header layout.2d CVE-2026-988897.8 ALT

6.3%

——2In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix sched scan IE sizing Scheduled scan built the probe request before iwl_mvm_scan_fits(), so oversized IEs could be copied into the fixed preq buffer before length validation. Move iwl_mvm_build_scan_probe() after the fits check. Also advertise max_sched_scan_ie_len using iwl_mvm_max_scan_ie_len() so userspace limits account for driver-inserted DS/TPC bytes.1d CVE-2026-98888—

8.2%

——2In the Linux kernel, the following vulnerability has been resolved: arm64: kprobes: Allow reentering kprobes while single-stepping A kprobe can be hit while another kprobe is in KPROBE_HIT_SS state. This can happen when tracing or perf code runs from the debug exception path while the first kprobe is preparing or executing its out-of-line single-step instruction. Currently arm64 treats a kprobe hit in KPROBE_HIT_SS as unrecoverable, the same as a hit in KPROBE_REENTER. This is too strict. A hit in KPROBE_HIT_SS is still a one-level reentry and can be handled by saving the current kprobe state and setting up single-step for the new probe, just like reentry from KPROBE_HIT_ACTIVE or KPROBE_HIT_SSDONE. The truly unrecoverable case is hitting another kprobe while already in KPROBE_REENTER, because the reentry save area has already been consumed. Move KPROBE_HIT_SS to the recoverable reentry cases and leave KPROBE_REENTER as the unrecoverable nested reentry case. This change also requires saving saved_irqflag in struct prev_kprobe. When a nested kprobe calls kprobes_save_local_irqflag(), it overwrites kcb->saved_irqflag with the currently masked DAIF value, losing the outer kprobe's original DAIF state. Without this fix, when the outer kprobe's single-step finishes, kprobes_restore_local_irqflag() applies the wrong DAIF mask and leaves interrupts permanently disabled. Extend struct prev_kprobe with a saved_irqflag field and save/restore it alongside kp and status. This ensures the outer kprobe's original interrupt state is preserved across reentry. This mirrors the x86 fix in commit 6a5022a56ac3 ("kprobes/x86: Allow to handle reentered kprobe on single-stepping").2d CVE-2026-98887—

11.5%

——3In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211_hwsim: reject undersized HWSIM_ATTR_TX_INFO hwsim_tx_info_frame_received_nl() casts the HWSIM_ATTR_TX_INFO payload to a struct hwsim_tx_rate * and unconditionally reads IEEE80211_TX_MAX_RATES entries (8 bytes) from it. The policy only bounds the attribute from above (NLA_BINARY .len is a maximum) and the op sets GENL_DONT_VALIDATE_STRICT, so a short or zero-length attribute is accepted and the loop reads past the payload. Require the exact length in the policy, so a malformed attribute is rejected before the handler runs.2d CVE-2026-98886—

8.2%

——2In the Linux kernel, the following vulnerability has been resolved: drm/gma500: return errors from Oaktrail HDMI I2C reads xfer_read() waits for the HDMI I2C transaction to reach I2C_TRANSACTION_DONE, but it ignores both timeout and signal returns from wait_for_completion_interruptible_timeout(). If the interrupt never advances the transaction state, the loop can wait forever. Return -ETIMEDOUT when the completion wait expires, propagate interrupted waits, and make the I2C master_xfer callback return the first transfer error instead of reporting a successful message count.2d CVE-2026-98885—

7.4%

——2In the Linux kernel, the following vulnerability has been resolved: ima: return error early if file xattr cannot be changed During early boot, the filesystem is read-only and any changes to xattrs are not allowed. This fails in case of ext4 because changing xattr starts an ext4 transaction which fails with the following warning. WARNING: fs/ext4/ext4_jbd2.c:75 at ext4_journal_check_start+0x63/0xa0 [ext4], CPU#1: systemd-sysroot/561 CPU: 1 UID: 0 PID: 561 Comm: systemd-sysroot Not tainted 6.19.12-1-default #1 PREEMPT(voluntary) openSUSE Tumbleweed c2dfc3c9d9f6f1233251c5d4410574fe82a348ee Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:ext4_journal_check_start+0x63/0xa0 [ext4] Call Trace: __ext4_journal_start_sb+0x3e/0x180 [ext4 6d025f3bc52c89a957b89a89d211fadf5e9434e1] ext4_xattr_set+0x104/0x150 [ext4 6d025f3bc52c89a957b89a89d211fadf5e9434e1] __vfs_setxattr+0x9a/0xd0 __vfs_setxattr_noperm+0x76/0x1f0 ima_appraise_measurement+0x23e/0xe40 ima_d_path+0x5a/0xd0 process_measurement+0xb29/0xc40 ? copy_from_kernel_nofault+0x21/0xe0 ? fscrypt_file_open+0xc0/0xe0 ? ext4_file_open+0x60/0x490 [ext4 6d025f3bc52c89a957b89a89d211fadf5e9434e1] ? bpf_prog_31efb7c56239148b_restrict_filesystems+0xab/0x126 ? __bpf_prog_exit+0x23/0xd0 ? __bpf_tramp_exit+0xd/0x50 ? bpf_trampoline_6442530367+0x9f/0xea ima_file_check+0x57/0x80 security_file_post_open+0x50/0xf0 path_openat+0x493/0x1650 do_filp_open+0xc7/0x170 Detect the state of the file early and return the error.2d CVE-2026-98884—

8.2%

5.3%

——2In the Linux kernel, the following vulnerability has been resolved: serial: 8250_port: recognize UPIO_AU My MIPS Alchemy systems generate the following warning during probe of the 8250 driver: WARNING: drivers/tty/serial/8250/8250_port.c:462 at set_io_from_upio+0xfc/0x124, CPU#0: swapper/0/1 Unsupported UART type 4 [...] [<80521d40>] set_io_from_upio+0xfc/0x124 [<80521dfc>] serial8250_set_defaults+0x94/0xe0 [<80520fb4>] serial8250_register_8250_port+0x288/0x51c [<805214ec>] serial8250_probe+0x160/0x1e8 [<8053b5f0>] platform_probe+0x64/0x90 The least invasive fix is to recognize UPIO_AU (type 4) in set_io_from_upio() and do nothing, since all parameters have already been set up in 8250_rt288x.c::au_platform_setup(). Run-tested on Alchemy Au1300 platform.2d CVE-2026-98882—

8.6%

——3In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Add range checks for dec_output_info If the driver's dec_output_info contains invalid data the driver can write in invalid memory. Add a range check for that. This fixes this smatch error: drivers/media/platform/chips-media/wave5/wave5-vpuapi.c:588 wave5_vpu_dec_get_output_info() error: buffer overflow 'inst->frame_buf' 64 <= 1272d CVE-2026-98881—

7.4%

——2In the Linux kernel, the following vulnerability has been resolved: net: bridge: remove stale rcu_barrier() in br_multicast_dev_del() This rcu_barrier() came from a time call_rcu() calls were used in net/bridge/br_multicast.c. Now kfree_rcu() is there, we can remove this problematic rcu_barrier() which causes extreme RTNL pressure in many syzbot reports. INFO: task syz-executor:77945 is blocked on a mutex likely owned by task kworker/u1024:5:36537. task:kworker/u1024:5 state:D stack:24616 pid:36537 tgid:36537 ppid:2 task_flags:0x4208060 flags:0x00080000 last_sleep:612797637337 Workqueue: netns cleanup_net Call Trace: <TASK> [<ffffffff81914eaa>] context_switch+0xf2a/0x1730 kernel/sched/core.c:6483 [<ffffffff81201143>] __schedule+0x1133/0x43a0 kernel/sched/core.c:8411 [<ffffffff8120446b>] __schedule_loop kernel/sched/core.c:8514 [inline] [<ffffffff8120446b>] schedule+0xab/0x260 kernel/sched/core.c:8529 [<ffffffff8121a093>] schedule_timeout+0xc3/0x2b0 kernel/time/sleep_timeout.c:75 [<ffffffff81205347>] do_wait_for_common kernel/sched/completion.c:100 [inline] [<ffffffff81205347>] __wait_for_common kernel/sched/completion.c:121 [inline] [<ffffffff81205347>] wait_for_common kernel/sched/completion.c:132 [inline] [<ffffffff81205347>] wait_for_completion+0x2c7/0x5d0 kernel/sched/completion.c:153 [<ffffffff81b8f27f>] rcu_barrier+0x49f/0x620 kernel/rcu/tree.c:3888 [<ffffffff860091b3>] br_multicast_dev_del+0x303/0x350 net/bridge/br_multicast.c:4459 [<ffffffff85fb5dbc>] br_dev_uninit+0x1c/0x40 net/bridge/br_device.c:157 [<ffffffff8568058c>] unregister_netdevice_many_notify+0x1c1c/0x2300 net/core/dev.c:12599 [<ffffffff8562be43>] ops_exit_rtnl_list net/core/net_namespace.c:187 [inline] [<ffffffff8562be43>] ops_undo_list+0x3d3/0x940 net/core/net_namespace.c:2482d CVE-2026-98880—

6.8%

——2In the Linux kernel, the following vulnerability has been resolved: ntfs3: handle set_blocksize failures ntfs3 uses buffer_heads, which don't handle block size > PAGE_SIZE well. Without this, mounting we will hit the BUG_ON(offset >= folio_size(folio)); in folio_set_bh on the first __bread_gfp call.2d CVE-2026-98879—

7.4%

——2In the Linux kernel, the following vulnerability has been resolved: isofs: handle set_blocksize failures isofs uses buffer_heads, which don't handle block size > PAGE_SIZE well. Without this, mounting we will hit the BUG_ON(offset >= folio_size(folio)); in folio_set_bh on the first __bread_gfp call.2d CVE-2026-98878—

8.8%

——3In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v5: Immediately exec priority drop following activate With GICv5 an interrupt of equal or lower priority cannot be signalled until there has been a priority drop. This is done via the GIC CDEOI system instruction. Once this has been executed, the hardware is able to signal the next interrupt if there is one. As all interrupts are programmed to have the same priority, no new interrupts can be signalled until the priority drop has happened. This can cause issues when, for example, an interrupt remains active while a long running process takes place, such as when injecting a physical interrupt into a guest VM in software. The GICv5 driver has so far done the priority drop as part of irq_eoi(), i.e., at the same time as deactivating the interrupt. This means that any long running process (or VM) could block incoming interrupts, effectively causing a denial of service for all other interrupts. Rather than doing the EOI as part of irq_eoi() (which the name would suggest would be a good place for it), move it to happen immediately after acknowledging an interrupt in the main GICv5 interrupt handler. The deactivation of interrupts (GIC CDDI) remains implemented as part of irq_eoi(), which means that the same interrupt cannot be signalled a second time until deactivated by software.2d CVE-2026-98877—

7.4%

——2In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v4: Don't advertise VLPIs if no ITS is probed When accidentally setting “kvm-arm.vgic_v4_enable=1” on a system that has no MSI controller device tree node and GICv4, it results a panic as “gic_domain” is NULL and the kernel attempts to access it. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000028 Mem abort info: ESR = 0x0000000096000006 CPU: 1 UID: 0 PID: 295 Comm: lkvm-static Not tainted 7.1.0-rc4-ge3f15ad3970e #5 PREEMPT Hardware name: linux,dummy-virt (DT) pstate: 81402005 (Nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : __irq_domain_instantiate+0x1d4/0x578 lr : __irq_domain_instantiate+0x1cc/0x578 Set vLPI support to false at init time if the host has no ITS, so it propagates properly to kvm_vgic_global_state.has_gicv4.2d CVE-2026-98876—

7.4%

——2In the Linux kernel, the following vulnerability has been resolved: host1x: bus: Fix missing ops null check in error teardown In host1x_device_init(), the error teardown paths do not check client->ops before dereferencing it, unlike the forward init paths which correctly guard with 'client->ops &&'. This can result in a NULL pointer dereference if client->ops is NULL. Fix by adding the missing client->ops check in both the teardown and teardown_late labels.2d CVE-2026-98875—

6.6%

——2In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/gsp: add SEC2 to GA100 chip table The booter-load and booter-unload firmware run on the SEC2 falcon. During tu102_gsp_oneinit(), the booter constructor needs device->sec2 to access the SEC2 falcon. Without the .sec2 entry, device->sec2 is NULL and this dereference crashes during GSP-RM boot.2d CVE-2026-98874—

8.8%

——3In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mld: don't WARN on WoWLAN suspend w/o netdetect Clearly, from a user perspective, it must be valid to configure WoWLAN and then suspend while not connected to a network. Since mac80211 doesn't distinguish these cases and simply calls the driver to suspend whenever WoWLAN is configured, the driver has to cleanly handle the case where it's called for WoWLAN, it's not connected but there's also no netdetect configured. Remove the WARN_ON() and keep returning 1 to disconnect and then suspend.2d CVE-2026-98873—

7.4%

——2In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_expect: zero at allocation time There are occasional LLM hints wrt. leaking uninitialized data to userspace via ctnetlink. Just zero at allocation time, expectations are not frequently used these days. Intentionally keeps _init as-is because we could theoretically support re-init, so add the missing exp->dir there.2d CVE-2026-98872—

11.5%

——3In the Linux kernel, the following vulnerability has been resolved: freevxfs: don't BUG() on unknown typed-extent type vxfs_bmap_typed() handles four typed-extent types and calls BUG() in its default case, so an on-disk typed extent with any other type value crashes the kernel. It is reachable from ioctl(FIBMAP) on a regular file: kernel BUG at fs/freevxfs/vxfs_bmap.c:230! RIP: vxfs_bmap_typed fs/freevxfs/vxfs_bmap.c:230 [inline] vxfs_bmap1+0x128a/0x12d0 fs/freevxfs/vxfs_bmap.c:257 Replace the BUG() with WARN_ON_ONCE() and return 0 -- the value vxfs_bmap_typed() already returns on failure (and from the DEV4 case above); vxfs_getblk() maps 0 to -EIO, so the ioctl fails cleanly.2d CVE-2026-98871—

6.1%

——2In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Fix possible deadlock in SEV init failure path __sev_platform_init_handle_init_ex_path() calls rmp_mark_pages_firmware() with locked=false while the parent function of init_ex_path already acquired the sev_cmd_mutex. In the case of an RMPUPDATE failure for any page after the first, the cleanup path would invoke reclaim pages which would result in a deadlock in sev_do_cmd. Pass locked=true to honor the lock status of the parent function.2d CVE-2026-988708.8 ALT

45.4%

——14In the Linux kernel, the following vulnerability has been resolved: ksmbd: remove stale channels from all sessions on teardown ksmbd_sessions_deregister() removes a connection's channels from other sessions' channel lists only while conn->binding is still set: if (conn->binding) { hash_for_each_safe(sessions_table, ...) ksmbd_chann_del(conn, sess); } conn->binding is a transient flag: it is cleared once a binding SESSION_SETUP completes, and also by a subsequent non-binding SESSION_SETUP on the same connection (a reauthentication on a bound channel, or a new SessionId==0 setup). A connection that has bound a channel into another session's ksmbd_chann_list and then clears conn->binding leaves that channel behind when it disconnects: the channel, whose chann->conn points at the now freed struct ksmbd_conn, stays on the owner session's list. When the owning connection later tears down, the second loop dereferences the stale channel: xa_for_each(&sess->ksmbd_chann_list, chann_id, chann) if (chann->conn != conn) ksmbd_conn_set_exiting(chann->conn); /* freed */ which is a use-after-free write into the freed ksmbd_conn (the same stale channel is also walked by show_proc_session() through /proc). The session is leaked as well, because its channel list never empties. Remove the conn->binding gate so a connection always removes its channels from every session on teardown.1d CVE-2026-95620—

13.6%

——4A use-after-free vulnerability in the Qt QNetworkAccessManager HTTP/2 client support of the Qt Network module allows a malicious or compromised HTTP/2 server to cause the client application to crash, affecting availability.2d CVE-2026-942634.8 MED

9.8%

——3The Advanced Custom Fields: Extended and Advanced Custom Fields: Extended PRO WordPress plugins from 0.9.2.4 to 0.9.2.7 do not consistently disable shortcode processing in the confirmation message of their front-end forms, allowing unauthenticated visitors to have arbitrary shortcodes executed server-side when they submit a form whose stored configuration does not carry the relevant setting.2d CVE-2026-568408.8 ALT

15.7%

——5PraisonAI is a multi-agent teams system. From version 4.5.2 to before version 4.6.59, praisonai.bots.HTTPApproval renders pending tool approval arguments directly into the approval dashboard HTML. An attacker-controlled tool argument can inject JavaScript into that page. When a human opens the approval URL to inspect the risky tool request, the script runs in the dashboard origin and can POST to the same request's /approve/{request_id}/decide endpoint, causing HTTPApproval to return approved=True. This issue has been patched in version 4.6.59.2d CVE-2026-568387.8 ALT

3.8%

——1PraisonAI is a multi-agent teams system. From version 4.5.87 to before version 4.6.59, PraisonAI recipe execution blocks default-denied dangerous tools unless the caller explicitly passes allow_dangerous_tools=True. The normal recipe.run() path enforces this with _check_tool_policy(). The streaming path, recipe.run_stream(), loads the same recipe, checks dependencies, and then calls _execute_recipe() without running the dangerous-tool policy check. As a result, a recipe that honestly declares execute_command in TEMPLATE.yaml requires.tools is denied by recipe.run(), but reaches the execution engine through recipe.run_stream() with allow_dangerous_tools=False. This issue has been patched in version 4.6.59.2d CVE-2026-568378.6 ALT

8.3%

——2PraisonAI is a multi-agent teams system. From version 4.6.56 to before version 4.6.59, PraisonAI's LinearBot starts a public webhook listener on 0.0.0.0 and treats LINEAR_WEBHOOK_SECRET as optional. When the secret is absent, startup only logs a warning and _handle_webhook() skips Linear-Signature verification entirely. An unauthenticated network caller who can reach the webhook endpoint can submit a forged Linear-Event: AgentSession request. The forged request is parsed, scheduled for background processing, dispatched to _handle_agent_session(), and passed into BotSessionManager.chat(). The bot then attempts to post the agent response back to Linear under the configured bot token. The PoV is offline and deterministic. It does not contact Linear. It calls the webhook handler directly, monkey-patches the outbound Linear comment path, and proves both sides of the boundary. This issue has been patched in version 4.6.59.2d CVE-2026-568368.2 ALT

13.3%

——4PraisonAI is a multi-agent teams system. From version 4.5.112 to before version 4.6.59, PraisonAI's installed console entrypoint is Typer-first. In current releases, the recipe command is registered in the Typer app and praisonai recipe serve dispatches to the deprecated Typer command in src/praisonai/praisonai/cli/commands/recipe.py. That Typer command can start the Recipe HTTP server on a non-localhost interface with no authentication. It prints a deprecation warning, and then launches the server. Because config.auth is absent, create_app() does not attach the API-key or JWT middleware. Unauthenticated requests can then reach the recipe API and, when enabled, /admin/reload. This issue has been patched in version 4.6.59.2d CVE-2026-568358.3 ALT

11.8%

——4PraisonAI is a multi-agent teams system. From version 3.11.0 to before version 4.6.59, PraisonAI's Slack bot applies its configured allowed_users, allowed_channels, and unknown-user pairing policy in the normal Slack message event handler, but not in the adjacent Slack app_mention event handler. A Slack workspace user who can mention the bot in a channel where the Slack app is present can trigger the configured PraisonAI agent even when: the sender is not in BotConfig.allowed_users; the channel is not in BotConfig.allowed_channels; unknown_user_policy="deny" is configured; and the same event content is correctly dropped by the normal message handler. This issue has been patched in version 4.6.59.2d CVE-2026-568347.5 ALT

30.9%

——9PraisonAI is a multi-agent teams system. From version 3.8.1 to before version 4.6.59, PraisonAI's Dynamic Context Discovery feature exposes artifact helper tools through ctx.get_tools(). The implemented artifact tools do not enforce that the supplied artifact_path is an artifact created by the configured store or that it lives under the configured artifact base directory. Instead, artifact_head, artifact_tail, artifact_grep, and artifact_chunk wrap the caller-supplied path directly into an ArtifactRef and then read it from the host filesystem. As a result, any prompt/user/tool-caller that can influence those tool arguments can read files readable by the PraisonAI process, such as project .env files, cloud credentials, SSH keys, source files, or other local data. This issue has been patched in version 4.6.59.2d CVE-2026-568337.5 ALT

39.6%

——12PraisonAI is a multi-agent teams system. From version 3.8.1 to before version 4.6.59, PraisonAI's Dynamic Context module provides filesystem-backed history and terminal-log storage. The module also exports agent-callable tool factories. Those tools accept run_id and agent_id arguments from the tool caller. The underlying stores join those values into filesystem paths without rejecting absolute paths or .. traversal. Because run_id can be an absolute path and agent_id can contain traversal, a lower-trust prompt/user that can call these tools can read .jsonl and .log files outside the configured Dynamic Context base directory. This issue has been patched in version 4.6.59.2d CVE-2026-568328.8 ALT

3.9%

——1PraisonAI is a multi-agent teams system. From version 4.5.2 to before version 4.6.59, praisonai.bots.DiscordApproval approves a pending dangerous tool call when it sees any later non-bot message in the configured Discord channel whose text is classified as approval, such as yes. As a result, any user who can post in the configured approval channel can approve a pending high-risk tool call by sending yes after the approval message appears. the same PoV also shows that the Slack and Telegram messaging approval backends have no explicit approver allowlist parameter, but the primary report-grade issue is the Discord backend's unthreaded channel cross-talk: the approving message does not need to be a reply or otherwise request-bound. This issue has been patched in version 4.6.59.2d CVE-2026-1157278.1 ALT

52.9%

——16AgenticSeek before commit 409840c contains a remote code execution vulnerability because llm_server/app.py hardcodes Flask debug mode while binding to all interfaces. Attackers who reach the server port and obtain the derivable Werkzeug debugger PIN can execute Python code and operating system commands with llm_server privileges.2d CVE-2026-1157267.8 ALT

5.6%

——2Aider through 0.86.2 contains a command execution vulnerability that allows attackers to run shell commands by committing a malicious .aider.conf.yml that is auto-loaded without a trust prompt. Attackers can set notifications-command or editor values that are executed via subprocess with shell=True after model replies or /editor use, running commands with the victim's privileges.2d CVE-2026-1157254.2 MED

15.0%

——4Chatwoot before 4.17.0 contains an authorization bypass vulnerability that allows authenticated agent bots to access other accounts by supplying a foreign contact inbox source_id. Attackers can call the conversations create endpoint with another account's source_id to create or retrieve conversations and post messages to that account's contacts.2d CVE-2026-1157242.9 BAJ

0.4%

——0VLC for Android before 3.7.2 contains a confused-deputy file overwrite vulnerability in FileUtils.getUri() that trusts content URIs based only on the com.fsck.k9.attachmentprovider or gmail-ls authority. A co-installed app without permissions can declare these authorities and send a crafted VIEW intent to the exported StartActivity, making VLC write attacker-chosen content under an attacker-chosen name in the shared Download directory, overwriting other apps' files when VLC holds All files access.2d CVE-2026-1157237.4 ALT

35.9%

——11Snap7 through 1.4.3 contains an out-of-bounds write vulnerability in the passive partner that allows a malicious active partner to overflow application buffers by declaring an unvalidated BSend total length. Attackers connecting from the configured peer address can declare up to 65535 bytes and send a short fragment, causing BRecv to memcpy past the buffer and crash or corrupt SCADA, HMI or gateway processes.2d CVE-2026-1157226.1 MED

2.5%

——1RPly through 1.1.4 contains an improper array index validation vulnerability in ply_read_header_property() that accepts list as a list property's length or value type. Attackers can supply a crafted PLY file that makes ply_read_list_property() call an out-of-bounds handler, crashing ASCII parsing or corrupting memory in binary parsing.2d CVE-2026-1129048.7 ALT

26.7%

——8Vvveb is a powerful and easy to use CMS with page builder to build websites, blogs or ecommerce stores. In versions 1.0.8.6 and prior, the nextRestore() and nextBackup() functions in the backup controller accept a file GET parameter and concatenate it directly to DIR_BACKUP without calling sanitizeFileName(). This allows an authenticated administrator to read arbitrary files on the server (via nextRestore) and write SQL dump content to arbitrary locations (via nextBackup). This is inconsistent with the sibling functions restore(), delete(), and download() which all correctly call sanitizeFileName() first. This issue has been patched via commit aa29cb0.2d